Eigenschappen
| Version | Power supply, switch-mode power supply unit, 24 V |
| Order No. | 1165480010 |
| Type | CP M SNT 250W 24V 10AUW |
| GTIN (EAN) | 4050118117318 |
| Qty. | 1 items |
| Delivery status | Discontinued |
| Available until | 19.05.2022 |
| Alternative product | [2467250000](~/p/2467250000) |
| Depth | 155 mm |
| Depth (inches) | 6,102 inch |
| Height | 130 mm |
| Height (inches) | 5,118 inch |
| Width | 60 mm |
| Width (inches) | 2,362 inch |
| Net weight | 1.300 g |
| Storage temperature | -40 °C...85 °C |
| Operating temperature | -25 °C...70 °C |
| RoHS Compliance Status | Compliant |
| REACH SVHC | Lead 7439-92-1 |
| AC current consumption | 1.2 A @ 230 V AC / 2.4 A @ 115 V AC |
| AC input voltage range | 85...264 V AC (derating at 100 V AC) |
| Connection system | Screw connection |
| DC current consumption | 0.8 A @ 370 V DC / 2.3 A @ 120 V DC |
| DC input voltage range | 80…430 V DC |
| Frequency range AC | 47...63 Hz |
| Input fuse (internal) | Yes |
| Inrush current | max. 12 A |
| Rated input voltage | 100...240 V AC (wide-range input) |
| Recommended back-up fuse |
4 A / DI, safety fuse 10 A, Char. B, circuit breaker 3...4 A, Char. C, circuit breaker |
| Wire connection method | Screw connection |
| Continuous output current @ UNominal | 12 A @ 45 °C, 10,7 A @ 55 °C, 7,5 A @ 70 °C |
| Nominal output current for Unom | 10 A @ 60 °C |
| Output current | 10A |
| Output voltage type | DC |
| Output voltage, max. | 29,5 V |
| Output voltage, min. | 22,5 V |
| Output voltage, note | (adjustable via potentiometer on front) |
| Overload protection | Yes |
| Parallel connection option | yes, max. 5 (without diode module) |
| Rated output voltage | 24 V DC ± 1 % |
| Residual ripple, breaking spikes |
< 50 mVPP @ 24 V DC, IN
< 2,4 VSS @ 24 V DC, IN @ -40°C |
| Wire connection method | Screw connection |
| AC failure bridging time @ Inom | > 20 ms @ 230 V AC / > 20 ms @ 115 V AC |
| Ambient temperature | -25 °C...+70 °C (derating from 60 °C) |
| Clip-in foot | metal |
| Current limiting | > 120% IN |
| Degree of efficiency | 90 % @ 230 V AC / 87 % @ 115 V AC |
| Housing version | Metal, corrosion resistant |
| Indication | Dual LED Operational: green LED, Error: red LED |
| Max. perm. air humidity (operational) | 5 %…95 % RH |
| Mounting position, installation notice | Horizontal on TS35 mounting rail. 50 mm of clearance at top & bottom for air circ. Can mount side by side with no space in between. |
| Power factor (approx.) | > 0.99 @ 230 V AC / > 0.97 @ 115 V AC |
| Protection against over-heating | Yes |
| Protection against reverse voltages from the load | 30…35 V DC |
| Protection degree | IP20 |
| Short-circuit protection | Yes |
| Interference immunity test acc. to | EN 61000-4-2 (ESD)|EN 61000-4-3 and EN 61000-4-8 (fields)|EN 61000-4-4 (burst)|EN 61000-4-5 (surge)|EN 61000-4-6 (conducted)|EN 61000-4-11 (dips) |
| Limiting of mains voltage harmonic currents | According to EN 61000-3-2 |
| Noise emission in accordance with EN55032 | Class B |
| Shock resistance IEC 60068-2-27 | 30 g in all directions |
| Insulation voltage | 3 kV input/ouput; 2 kV input/earth; 0.5 kV output/earth |
| Pollution severity | 2 |
| Protection class | I, with PE connection |
| Electrical machine equipment | Acc. to EN60204 |
| For use with electronic equipment | Acc. to EN50178 / VDE0160 |
| Protection against dangerous shock currents | Acc. to VDE0106-101 |
| Protective separation / protection against electrical shock | VDE0100-410 / acc. to DIN57100-410 |
| Safety transformers for switch-mode power supplies | According to EN 61558-2-16 |
| Conductor cross-section, AWG/kcmil , max. | 12 |
| Conductor cross-section, AWG/kcmil , min. | 26 |
| Conductor cross-section, flexible , min. | 0,5 mm² |
| Conductor cross-section, rigid , max. | 6 mm² |
| Conductor cross-section, rigid , min. | 0,5 mm² |
| Connection system | Screw connection |
| Number of terminals | 3 for L/N/PE |
| Tightening torque, max. | 0,6 Nm |
| Tightening torque, min. | 0,5 Nm |
| Wire connection cross section, flexible (input), max. | 2,5 mm² |
| Conductor cross-section, AWG/kcmil , max. | 12 |
| Conductor cross-section, AWG/kcmil , min. | 26 |
| Conductor cross-section, flexible , max. | 2,5 mm² |
| Conductor cross-section, flexible , min. | 0,5 mm² |
| Conductor cross-section, rigid , max. | 6 mm² |
| Conductor cross-section, rigid , min. | 0,5 mm² |
| Number of terminals | 6 (+,+,-,-,COM,NO) |
| Tightening torque, max. | 0,6 Nm |
| Tightening torque, min. | 0,5 Nm |
| Contact load (NO contact) | max. 30 V DC / 0.5 A |
| Floating contact | Yes |
| Relay on/off | Output voltage > 21.6 V / < 20.4 V |
| Status indicator |
Green LED
red LED |
| Approval/Certificate/Document of Conformity | [DE_PA5200_160512_003.pdf](https://mdcop.weidmueller.com/mediadelivery/asset/900_38734) |
| Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_204232) |
| CADENAS eCATALOG | [CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1165480010) |
| User Documentation | [Operating instructions](https://mdcop.weidmueller.com/mediadelivery/asset/900_38535) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC002540 |
| ETIM 7.0 | EC002540 |
| ETIM 8.0 | EC002540 |
| ETIM 9.0 | EC002540 |
| ETIM 10.0 | EC002540 |
| ECLASS 9.0 | 27-04-07-01 |
| ECLASS 9.1 | 27-04-07-01 |
| ECLASS 10.0 | 27-04-07-01 |
| ECLASS 11.0 | 27-04-07-01 |
| ECLASS 12.0 | 27-04-07-01 |
| ECLASS 13.0 | 27-04-07-01 |
| ECLASS 14.0 | 27-04-07-01 |
| ECLASS 15.0 | 27-04-07-01 |
| Approvals |    |
| ROHS | Conform |
| UL File Number Search | [UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) |
| Certificate no. (cULus) | E258476 |
Toebehoren
-
Product ID:1478990000VPE:50 items
End bracket, black, TS 35, V-0, Wemid, Width: 12 mm, 130 °C
-
Product ID:1479000000VPE:50 items
End bracket, black, TS 35, V-0, Wemid, Width: 8 mm, 130 °C
Terminal BlocksAccessoriesEnd bracketsTS 35W-Series