CRMKIT P 12VDC 4CO L/D UL

CRMKIT P 12VDC 4CO L/D UL

, Anzahl Kontakte: 4, Wechsler AgNi, Nennsteuerspannung: 24 V DC, 12 V DC, Dauerstrom: 7 A, PUSH IN, Prüftaste vorhanden: Nein

Tuotteen tunnus 8000158958
Lataa tietosivu Product Downloads
Samankaltaiset tuotteet 112
General ordering data Rozměry a hmotnosti Temperatures Řídící strana Load side General data Coordinación de aislamiento Connection data Clasificaciones

General ordering data

Version
, Anzahl Kontakte: 4, Wechsler AgNi, Nennsteuerspannung: 24 V DC, 12 V DC, Dauerstrom: 7 A, PUSH IN, Prüftaste vorhanden: Nein 
Order No.
8000158958 
Type
CRMKIT P 12VDC 4CO L/D UL 

Rozměry a hmotnosti

Depth
72,5 mm
Depth (inches)
2,854 inch
Height
97 mm
Altura (pulgadas)
3,819 inch
Width
31 mm
Width (inches)
1,22 inch

Temperatures

Ambient temperature
-20 °C…70 °C 

Řídící strana

Rated control voltage
24 V DC 
12 V DC 
Courant nominal DC
45 mA 
Power rating
1.2 W 
Coil resistance
640 Ω ± 10 % 
Status indicator
Green LED 
Protective circuit
Free-wheeling diode 
Coil voltage of the replacement relay deviating from the rated control voltage
No 
Coil voltage of the replacement relay
24 V DC 

Load side

Rated switching voltage
250 V AC 
Continuous current
7 A 
Max. switching frequency at rated load
0,1 Hz
최대 스위칭 전압, AC
250 V
Napięcie łączeniowe DC, max.
250 V
Inrush current
16 A / 20 ms 
AC switching capacity (resistive), max.
1500 
DC switching capacity (resistive), max.
168 W @ 24 V 
Switch-on delay
≤ 20 ms 
Switch-off delay
≤ 9 ms 
Contact type
4 CO contact (AgNi) 
Mechanical service life
2 x 107 switching cycles 

General data

Operating altitude
≤ 2000 m 
above sea level 
Mounting rail
TS 35 
Test button available
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Socket
  • UL94 flammability rating:
    V-0
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2

Coordinación de aislamiento

Pollution severity
2 
Categoría de sobretensión
II 
Dielectric strength for control side - load side
4 kVeff / 1 Min. 
Dielectric strength of neighbouring contacts
3 KVeff / 1 Min. 
Dielectric strength to mounting rail
3 kVeff / 1 min. 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Protection degree
IP20 

Connection data

Wire connection method
PUSH IN 
Stripping length, rated connection
8 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
1,5 mm²
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, min. (AWG)
AWG 20 
Wire cross-section, solid, max. (AWG)
AWG 16 
Twin wire-end ferrules, max.
1,5 mm²
Blade size
0.6 x 3.5 mm 

Clasificaciones

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01