KSPA M75 BNI
Similar to illustration

KSPA M75 BNI

KSPA (Klippon blanking plug, type A), Blanking plug, straight, M 75, 17 mm, Brass, nickel-plated

Tuotteen tunnus 1477730000
Lataa tietosivu Product Downloads Engineering Support
Samankaltaiset tuotteet 8
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Certificate numbers cable gland General information Classifications

Approvals

ROHS
Conform  

General ordering data

Version
KSPA (Klippon blanking plug, type A), Blanking plug, straight, M 75, 17 mm, Brass, nickel-plated  
Order No.
1477730000  
Type
KSPA M75 BNI  
GTIN (EAN)
4050118285680  
Qty.
1  items
Delivery status
Discontinued  
Available until
30.07.2023  

Dimensions and weights

Height
17  mm
Height (inches)
0,669  inch
Length
17  mm
Length (inches)
0,669  inch
Diameter
75  mm
Wall thickness, min.
0,5  mm
Wall thickness, max.
16  mm
Net weight
1 150  g

Temperatures

Operating temperature
-100 °C...400 °C  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
6c  
REACH SVHC
Lead 7439-92-1  
SCIP
e8f3dd16-18ca-4fe7-869b-76a120217e3a  

Certificate numbers cable gland

Approval conditions
ATEX  
IECEX  
Certificate no. cable gland (ATEX)
SIRA 09ATEX1320X or CML 19ATEX1089X  
Certificate no. cable gland (IECEx)
IECEx SIR 09.0131X or IECEx CML 19.0022X  
Identification
Ex d IIC Gb  
Ex e IIC Gb  

General information

Basic material
Brass, nickel-plated  
Coating
nickel-plated  
Diameter of sealing ring
75  mm
External thread
M 75  
Halogen
halogen-free  
Impact resistance
7 J ATEX version  
Length of thread
17  mm
Note: protection class
• All sealing plugs have a thread pitch of 1.5 mm. • To obtain the specified IP rating, the through hole must comply with the regulations of EN 50262 Table 1 and it should be possible to secure the sealing plug in a suitable manner. • On installation of the KSPA, the minimum number of engaged thread turns in line with the standard EN/IEC 60079-1, Section 5.3, must be observed. • With NEC / CEC applications, it must be ensured that the "female" thread of the connection device into which the sealing plugs are screwed reveals at least 8 fully engaged thread turns. • Operating instructions are enclosed with each sealing plug; these must be read prior to installation. The sealing plugs must be installed according to the specifications in the operating instructions. • If KSPA sealing plugs are inserted into non-metallic Ex e connection devices, they must be connected to the system's earth circuit.  
Operating temperature range, max.
400  °C
Operating temperature range, min.
−100  °C
Pitch of thread
1,5  mm
Protection class (UL)
Type 4X  
Protection degree
IP54  
IP66  
Standards
IEC 60079-0  
IEC 60079-1  
IEC 60079-7  
IEC 60079-31  
IEC 60529  

Classifications

ETIM 6.0
EC000451  
ETIM 7.0
EC000451  
ETIM 8.0
EC000451  
ETIM 9.0
EC000451  
ETIM 10.0
EC000451  
ECLASS 9.0
27-14-44-25  
ECLASS 9.1
27-14-44-35  
ECLASS 10.0
27-14-44-25  
ECLASS 11.0
27-14-44-25  
ECLASS 12.0
27-14-08-05  
ECLASS 13.0
27-14-08-05  
ECLASS 14.0
27-14-08-05  
ECLASS 15.0
27-14-08-05