PVC DC 2I 2O 12MPP RD SPD1R EVO 11
PVC DC 2I 2O 12MPP RD SPD1R EVO 11
PVC DC 2I 2O 12MPP RD SPD1R EVO 11

PVC DC 2I 2O 12MPP RD SPD1R EVO 11

Photovoltaics, Combiner Box, Fireman's switch, PV Next, 12 MPP's, 2 Inputs / 2 Outputs per MPP, Surge protection I / II, Remote disconnector, MC4-Evo 2, 1100 V

Tuotteen tunnus 8000130056
Lataa tietosivu Product Downloads Engineering Support
Lisävarusteet 9 On lisävaruste 4 Varaosat 4 Samankaltaiset tuotteet 26
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Included in delivery Guarantee Electrical characteristics Enclosure General data Inputs Outputs Remote disconnector Surge protection DC side Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Photovoltaics, Combiner Box, Fireman's switch, PV Next, 12 MPP's, 2 Inputs / 2 Outputs per MPP, Surge protection I / II, Remote disconnector, MC4-Evo 2, 1100 V 
Order No.
8000130056 
Type
PVC DC 2I 2O 12MPP RD SPD1R EVO 11 
GTIN (EAN)
4099987231794 
Qty.
1 items

Dimensions and weights

Depth
307 mm
Depth (inches)
12,087 inch
Height
640 mm
Height (inches)
25,197 inch
Width
800 mm
Width (inches)
31,496 inch
Net weight
20 036,336 g

Temperatures

Ambient temperature
-20 °C…50 °C 
Humidity
5 - 90 %, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant 
REACH SVHC
Lead 7439-92-1 

Included in delivery

Included accessories
  • Article:
    Mounting foot
  • Quantity:
    4
  • Article:
    Dustcap VSSO
  • Quantity:
    48
  • Article:
    Sealing plug
  • Quantity:
    4

Guarantee

Time interval
5 years 

Electrical characteristics

Corrente DC nominale per collegamento
  • Current per string, max.:
    41 A
Résistance nominale en courant à court terme
  • Rated current:
    51,25 A
Tension nominale DC
1 100 V
Áram/maximális teljesítménypont
41 A

Enclosure

Connection type string
Plug MC4-Evo 2 
Cover
Hinged door 
Enclosure attachment
Via mounting foots 
Impact resistance
IK10 in accordance with IEC 62262 
Insulating material
Polyester glass-fibre reinforced, Polycarbonate 
Protection class
II 
Type of mounting
Wall mounting 

General data

Installation location
Protected outdoor area (>1 km from sea) 
Protection degree
IP65 
Standards
EN 61439-2 
OVE-Directive R 11-1:2022-05-01 
EN 61643-31 

Inputs

Amount of maximum power points (MPP)
12 
DC Input + & -
  • Wire connection:
    • Type of connection:
      Stäubli MC4-Evo 2 connector
    • Compatible cable crossection:
      TÜV 2 Pfg1169/08.07
    • Wire cross-section, min.:
      2,5 mm²
    • Wire cross-section, max.:
      16 mm²
Functional earth connector
  • Cable entry:
    • Number of cable entries:
      2
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      25 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      16 mm²
Fuse type
Neither fuse cartridge nor holder 
Fuses
No 
Max. number of DC inputs
per Maximum Power Point 2 inputs connected in parallel 
Number of conduit inlets
6 
Number of string inputs per MPP
≤ 2 
Surge protection auxiliary contact
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      1,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      1,5 mm²
Number of inputs
24 

Outputs

DC Output + & -
  • Wire connection:
    • Type of connection:
      Stäubli MC4-Evo 2 connector
    • Compatible cable crossection:
      TÜV 2 Pfg1169/08.07
    • Wire cross-section, min.:
      2,5 mm²
    • Wire cross-section, max.:
      16 mm²
Max. number of DC outputs
per Maximum Power Point 2 outputs connected in parallel 

Remote disconnector

Automatic reclosing after voltage drop
Yes 
Number of operating cycles
10000 
Control voltage
100 V AC - 250 V AC 50/60Hz 
Remote disconnector auxiliary contact
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      2,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      2,5 mm²
Управляющий контакт удаленного разъединителя
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      2,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      2,5 mm²
Type of power circuit disconnection
Under voltage tripping 
Turn-off time
1.5 s 
Current consumption of switch
  • Type of switch:
    Fireman switch
  • Current consumption, note:
    The Peak current only arises for a short time when the capacitors of the fireman switch were previously completely discharged.
  • Current consumption peak:
    900 mA
  • Current consumption continuous:
    90 mA
Number of breaking operation cycles at rated current
300 
Switch disconnector execution
Remote disconnector inside enclosure 
Switching disconnector capacity
DC-PV1 

Surge protection DC side

Discharge current In (8/20 µs)
20 kA 
Lightning test current Iimp (10/350 µs)
5 kA 
Máx. tensión de servicio continua modo DC UCPV +/- , -/PE , +/PE
1 100 V
Protection level Up (+/- , -/PE , +/PE)
≤ 3.8 kV 
Protection level Up (+/-)
≤ 3.8 kV 
PV system voltage, max. Ucpv
1 100 V
Requirements class
Type I/II 
Schutzpegel Up (+/PE)
≤ 3.8 kV 
Short-circuit curent ISCPV
11 000 A
Standards
EN 61439-2 
OVE-Directive R 11-1:2022-05-01 
EN 61643-31 
Standby power consumption PC
<0.2 W 
Stupeň krytí Up (-/PE)
≤ 3.8 kV 
Surge protection DC side
1000 V type I + II 
Total discharge current Itotal ( 8/20µs)
50 kA
Total discharge current Itotal (10/350µs)
10 kA

Classifications

ETIM 8.0
EC003857 
ETIM 9.0
EC003857 
ETIM 10.0
EC003857 
ECLASS 14.0
22-57-02-92 
ECLASS 15.0
22-57-02-92 

Tender specification sheets

Long specification

Combiner box for inverters with Fireman switch and surge protection for the connection to 12 MPP tracker.
Suitable for remote disconnection of the DC side by the fire department according to VDE-AR-E2100-712.
Max. string voltage Uoc: 1100 VDC

Integrated surge protection with class I+II combined arresters with signal contact.
Suitable for protection against overvoltages in a photovoltaic system according to DIN CLC/TS 51643-32.

MPP1:
2 inputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
2 outputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

MPP2 to 12:
identical to MPP1

DC fireman switch:
Switching off by undervoltage tripping.
Switching off by reaching a temperature of ≥ 100 °C in the housing.
Automatic reconnection after the control voltage (230 V AC) is applied again.
With signal contact.

Connection of the fireman switch control line 230 VAC via M16 cable glands (Clamping range 5-10 mmØ) max. conductor cross-section: 1.5 mm².
Connection of the signal contact 24 VDC (max. 300 mA) via M16 cable glands (Clamping range 5-10 mmØ) max. conductor cross-section: 1.5 mm².
Protection class: IP65.
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 683x800x327 mm.

Approval according to low voltage switchgear IEC 61439-1 and EN 61439-2