DRIKIT 48VDC 2CO LD/PB
Product image
Similar to illustration
DRIKIT 48VDC 2CO LD/PB
Wiring diagram
DRIKIT 48VDC 2CO LD/PB
Graph
DC load limit curve
Resistive load
DRIKIT 48VDC 2CO LD/PB
Graph
Electrical service life
DRIKIT 48VDC 2CO LD/PB
Graph
DC operational voltage range
DRIKIT 48VDC 2CO LD/PB
Dimensional drawing
DRIKIT 48VDC 2CO LD/PB
Miscellaneous
Type codes

DRIKIT 48VDC 2CO LD/PB

D-SERIES DRI, Relay module, Number of contacts: 2, CO contact AgSnO, Rated control voltage: 48 V DC, Continuous current: 5 A, Screw connection, Test button available: Yes

Ürün No. 2476900000
Konfigüratörde aç
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 11 Münferit parçalar 3 İlgili ürünler 14
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

Omologazioni
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Változat
D-SERIES DRI, Relay module, Number of contacts: 2, CO contact AgSnO, Rated control voltage: 48 V DC, Continuous current: 5 A, Screw connection, Test button available: Yes 
N. d’ordine
2476900000 
Típus
DRIKIT 48VDC 2CO LD/PB 
GTIN (EAN)
4050118497120 
Qty.
10 adet

Dimensions and weights

깊이
68 mm
Depth (inches)
2,677 inch
Высота
80,2 mm
Height (inches)
3,157 inch
Szerokość
15,8 mm
Width (inches)
0,622 inch
Net weight
64 g

Temperatures

Lagertemperatur
-40 °C...85 °C 
Temperatura otoczenia
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS-undantag (om tillämpligt/känt)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
611f3393-31e7-4ef5-8360-95619a629f27 

Control side

Rated control voltage
48 V DC 
Rated current DC
11,2 mA 
Power rating
530 mW 
Coil resistance
4300 Ω ± 10 % 
Status indicator
Green LED 
Protective circuit
Free-wheeling diode 

Load side

Rated switching voltage
250 V AC 
Continuous current
5 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
1250 VA 
DC switching capacity (resistive), max.
150 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
2 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Mechanical switch position indicator
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
IIIb 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
4 kVeff / 1 min 
Dielectric strength of neighbouring contacts
1.5 kVeff /1 min. 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E355547 

Connection data

Vezetékcsatlakozás-technika
Screw connection 
Csupaszolási hossz, névleges csatlakozás
8 mm
Meghúzási nyomaték, min.
0,5 Nm
Tightening torque, max.
0,8 Nm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,25 mm²
4 mm²
Wire cross-section, solid, min.
0,25 mm²
Wire cross-section, solid, max.
4 mm²
Wire connection cross section, finely stranded, min.
0,25 mm²
Wire connection cross section, finely stranded, max.
4 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
4 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
4 mm²
Blade size
size PH1 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01