LMF 5.08/13/180 3.5SN BK BX
Product image
LMF 5.08/13/180 3.5SN BK BX
Product image
LMF 5.08/13/180 3.5SN BK BX
Dimensional drawing
LMF 5.08/13/180 3.5SN BK BX
Graph
LMF 5.08/13/180 3.5SN BK BX
Graph
LMF 5.08/13/180 3.5SN BK BX
Product benefits
Optional conductor outlet direction
Stable mechanical design
LMF 5.08/13/180 3.5SN BK BX
Product benefits
High reliability of the current capacity
LMF 5.08/13/180 3.5SN BK BX
Product benefits
Direct conductor entry
Cross section up to 2.5 mm²
LMF 5.08/13/180 3.5SN BK BX
Product benefits
Maintenance through test point

LMF 5.08/13/180 3.5SN BK BX

Printed circuit board terminals, 5.08 mm, Number of poles: 13, 180°, Solder pin length (l): 3.5 mm, tinned, black, PUSH IN with push button, Clamping range, max. : 2.5 mm², Box

Tuotteen tunnus 1426180000
Lataa tietosivu Tekninen tuki Tuotelataukset
Lisävarusteet 1 Samankaltaiset tuotteet 24
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Printed circuit board terminals, 5.08 mm, Number of poles: 13, 180°, Solder pin length (l): 3.5 mm, tinned, black, PUSH IN with push button, Clamping range, max. : 2.5 mm², Box 
Référence
1426180000 
Type
LMF 5.08/13/180 3.5SN BK BX 
GTIN (EAN)
4050118229868 
Qté.
20 adet
Product data
IEC: 400 V / 24 A / 0.5 - 2.5 mm²
UL: 300 V / 20 A / AWG 24 - AWG 12 
Packaging
Box 

Dimensions and weights

Profondeur
14,8 mm
Byggdjup (tum)
0,583 inch
Hauteur
22,7 mm
Height (inches)
0,894 inch
Height of lowest version
19,2 mm
Largeur
68,66 mm
Width (inches)
2,703 inch
Poids net
19,715 g

Environmental Product Compliance

Statut de conformité RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LMF 
Wire connection method
PUSH IN with push button 
Mounting onto the PCB
THT solder connection 
Orientation de la sortie du conducteur
180° 
Pitch in mm (P)
5,08 mm
Raster in Zoll (P)
0,2 "
Number of poles
13 
Polradstal
2 
Fitted by customer
No 
Number of rows
1 
maximal anreihbare Pole je Reihe
24 
Solder pin length (l)
3,5 mm
Dimensions du picot à souder
d = 0.8 mm 
Solder eyelet hole diameter (D)
1,1 mm
솔더 구멍 직경 공차(D)
+ 0,1 mm 
폴당 용접 핀 수
2 
스크류드라이버 블레이드
0,6 x 3,5 
Norme lame de tournevis
DIN 5264 
탈피 길이
10 mm
L1 in mm
60,96 mm
L1 w calach
2,4 "
zabezpieczenie przed dotykiem wg DIN VDE 0470
IP 20 
Защита от прикосновения согласно DIN VDE 57 106
защита от доступа пальцем 
Вид защиты
IP20 

Material data

절연재
Wemid (PA) 
컬러 코드
black 
Färg manöverelement
orange 
Tabella dei colori (simile)
RAL 9011 
CTI(Comparative Tracking Index, 비교 추적 지수)
≥ 600 
Класс пожаростойкости UL 94
V-0 
Matériau des contacts
Cu-alloy 
접점 표면
tinned 
코팅
4-6 μm SN 
납땜 유형
matt 
용접 결선의 레이어 구조
4...6 mm Sn matt 
Температура хранения, мин.
-40 °C
Lagertemperatur, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

Plage de serrage, min.
0,12 mm²
Plage de serrage, max.
2,5 mm²
Section de raccordement du conducteur, AWG, min.
AWG 24 
Section de raccordement du conducteur, AWG, max.
AWG 12 
단선, 최소 H05(07) V-U
0,5 mm²
Rigide, max. H05(07) V-U
2,5 mm²
연선, 최소 H05(07) V-K
0,25 mm²
연선, 최대 H05(07) V-K
2,5 mm²
avec embout isolé DIN 46 228/4, min.
0,25 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최대
2,5 mm²
와이어 엔드 페룰 포함, DIN 46228 pt 1, 최소
0,25 mm²
avec embout selon DIN 46 228/1, max.
2,5 mm²
EN 60999 a x b 규격, ø
2.4 mm x 1.5 mm 
클램프형 도체
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025870000
    • Longitud de desaislado:
      • nominal:
        10 mm
    • Terminal tubular recomendado:
      9004050000
  • Sección de conexión del conductor:
    • Tipo:
      conductor fino
    • nominal:
      0,75 mm²
  • Terminal tubular:
    • Longitud de desaislado:
      • nominal:
        12 mm
    • Terminal tubular recomendado:
      9025860000
    • Longitud de desaislado:
      • nominal:
        10 mm
    • Terminal tubular recomendado:
      0542500000
  • Sección de conexión del conductor:
    • Tipo:
      conductor fino
    • nominal:
      1 mm²
  • Terminal tubular:
    • Longitud de desaislado:
      • nominal:
        12 mm
    • Terminal tubular recomendado:
      9019100000
    • Longitud de desaislado:
      • nominal:
        10 mm
    • Terminal tubular recomendado:
      0282800000
  • Sección de conexión del conductor:
    • Tipo:
      conductor fino
    • nominal:
      1,5 mm²
  • Terminal tubular:
    • Longitud de desaislado:
      • nominal:
        10 mm
    • Terminal tubular recomendado:
      0186500000
    • Longitud de desaislado:
      • nominal:
        12 mm
    • Terminal tubular recomendado:
      0635100000
  • Sección de conexión del conductor:
    • Tipo:
      conductor fino
    • nominal:
      2,5 mm²
  • Terminal tubular:
    • Longitud de desaislado:
      • nominal:
        10 mm
    • Terminal tubular recomendado:
      9004080000
참조 텍스트
Choisissez la longueur des embouts en fonction du produit et de la tension nominale. 
Le diamètre extérieur du collier plastique ne doit pas être plus grand que le pas (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 60947-7-4 
정격 전류, 극 수(Tu=20°C)
24 A
정격 전류, 최대 극 수(Tu=20°C)
24 A
Névleges áram, min. pólusszám (Tu=40°C)
24 A
정격 전류, 최대 극 수(Tu=40°C)
24 A
서지 전압 클래스 정격 전압 / 오염 등급 II/2
400 V
서지 전압 클래스 정격 전압 / 오염 등급 III/2
320 V
서지 전압 클래스 정격 전압 / 오염 등급 III/3
250 V
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 II/2
4 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/2
4 kV
서지 전압 클래스 정격 임펄스 전압 / 오염 등급 III/3
4 kV
단시간 내전류 저항
3 x 1s with 120 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Nennstrom (Use group B / CSA)
20 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 12 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
Номинальное напряжение (группа использования D/UL 1059)
300 V
Courant nominal (groupe d'utilisation B / UL 1059)
20 A
Номинальный ток (группа использования D/UL 1059)
10 A
przekrój przyłącza przewodu AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 12 

Packing

Emballage
Box 
Longueur VPE
338 mm
Largeur VPE
130 mm
Hauteur VPE
27 mm

Type tests

Test : durabilité des marquages
  • Standard:
    IEC 61984 section 6.2 and 7.3.2 / 10.11
  • Test:
    mark of origin, type identification, type of material, approval marking UL, approval marking CSA, durability, pitch, date clock
  • Evaluation:
    available
Test : section à fixer
  • Standard:
    IEC 60999-1 section 7 and 9.1 / 11.99, IEC 60947-1 section 8.2.4.5.1 / 03.11
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0,12 mm²
    • Type of conductor and conductor cross-section:
      flexible 0,12 mm²
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
    • Type of conductor and conductor cross-section:
      stranded 2.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
    • Type of conductor and conductor cross-section:
      AWG 14/1
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed
Test des dommages causés aux et au desserrage accidentel des conducteurs
  • Standard:
    IEC 60999-1 section 9.4 / 11.99
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG26/19
  • Evaluation:
    passed
  • Requirement:
    0.3 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      AWG 14/1
  • Evaluation:
    passed
  • Requirement:
    0.9 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed
Test de décrochage
  • Standard:
    IEC 60999-1 section 9.5 / 11.99
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 26/1
    • Type of conductor and conductor cross-section:
      AWG 26/19
  • Evaluation:
    passed
  • Requirement:
    ≥15 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      stranded 0.25 mm²
  • Evaluation:
    passed
  • Requirement:
    ≥20 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H05V-U0.5
    • Type of conductor and conductor cross-section:
      H05V-K0.5
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      H07V-U2.5
    • Type of conductor and conductor cross-section:
      H07V-K2.5
    • Type of conductor and conductor cross-section:
      AWG 14/1
  • Evaluation:
    passed
  • Requirement:
    ≥60 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 12/19
  • Evaluation:
    passed

Important note

Conformité IPC
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Remarques
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01