SCDV 3.81/22/90G 3.2SN OR BX
Product image
SCDV 3.81/22/90G 3.2SN OR BX
Product image
SCDV 3.81/22/90G 3.2SN OR BX
Dimensional drawing

SCDV 3.81/22/90G 3.2SN OR BX

PCB plug-in connector, male header, closed side, THT solder connection, 3.81 mm, Number of poles: 22, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Box

Produkt ID 1032200000
Download datablad Engineering-support Produktdownloads
Anvendte produkter 12
Approvals General ordering data Dimensions and weights Environmental Product Compliance System specifications Material data Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
PCB plug-in connector, male header, closed side, THT solder connection, 3.81 mm, Number of poles: 22, 90°, Solder pin length (l): 3.2 mm, tinned, orange, Box 
Order No.
1032200000 
Type
SCDV 3.81/22/90G 3.2SN OR BX 
GTIN (EAN)
4032248771493 
数量
50 Styk
Product data
IEC: 320 V / 17.5 A
UL: 300 V / 11 A 
Packaging
Box 

Dimensions and weights

Depth
21,9 mm
Depth (inches)
0,862 inch
Height
25,9 mm
Height (inches)
1,02 inch
Height of lowest version
22,7 mm
Width
43,3 mm
Width (inches)
1,705 inch
Nettó tömeg
9,69 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System specifications

Product family
OMNIMATE Signal - series BC/SC 3.81 
Type of connection
Board connection 
Montáž na PCB desku
THT solder connection 
Rozteč v mm (P)
3,81 mm
Rozteč v palcích (P)
0,15 "
Výstupní tvarovka
90° 
Number of poles
22 
Počet pájených kolíků na pól
1 
Solder pin length (l)
3,2 mm
Solder pin length tolerance
+0,02 / -0.2 mm 
솔더핀 크기
d = 1.0 mm 
Octagonal 
Solder pin dimensions = d tolerance
0 / -0,03 mm 
솔더 구멍 직경(D)
1,2 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
L1 in mm
38,1 mm
L1 in inches
1,5 "
Number of rows
2 
Pin series quantity
2 
Touch-safe protection acc. to DIN VDE 57 106
finger-safe unplugged/ back-of-hand-safe plugged 
Touch-safe protection acc. to DIN VDE 0470
IP20 plugged/ IP10 unplugged 
Volume resistance
≤5 mΩ 
Can be coded
Yes 
Plugging force/pole, max.
7,5 N
Pulling force/pole, max.
5,5 N

Material data

Insulating material
PA GF 
Color
orange 
Tableau des couleurs (similaire)
RAL 2000 
Gruppo materiali isolanti
II 
比較追跡指数（CTI）
≥ 550 
UL 94 flammability rating
V-0 
Érintkező anyaga
Copper alloy 
Surface du contact
tinned 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Névleges áram, min. pólusszám (Tu=20 °C)
17,5 A
Névleges áram, min. pólusszám (Tu=40°C)
17 A
サージ電圧等級の定格電圧/汚染度 II/2
320 V
サージ電圧等級の定格電圧/汚染度 III/2
160 V
Tensione nominale con classe di sovratensione/grado di lordura III/3
160 V
サージ電圧等級の定格インパルス電圧/汚染度 II/2
2,5 kV
サージ電圧等級の定格インパルス電圧/汚染度 III/2
2,5 kV
Névleges lökőfeszültség a III/3 túlfeszültség osztályhoz / szennyeződés mértékéhez
2,5 kV
Tenue aux courants de faible durée
3 x 1s with 76 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Jmenovité napětí (aplikační skupina D / CSA)
300 V
Jmenovitý proud (aplikační skupina B / CSA)
11 A
Jmenovitý proud (aplikační skupina D / CSA)
10 A

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
定格電圧 (グループ D / UL 1059 使用)
300 V
定格電流 (グループ B / UL 1059 使用)
11 A
Rated current (Use group D / UL 1059)
10 A

Packing

Balení
Box 
Délka VPE
25 mm
VPE width
250 mm
Výška VPE
260 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Remarques
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • P on drawing = pitch
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002637 
ETIM 9.0
EC002637 
ETIM 10.0
EC002637 
ECLASS 14.0
27-46-02-01 
ECLASS 15.0
27-46-02-01