TOS 230VUC 24VDC2A
製品イメージ
図に類似
TOS 230VUC 24VDC2A
Wiring diagram
TOS 230VUC 24VDC2A
Maßbild
TOS 230VUC 24VDC2A
Miscellaneous
Type codes

TOS 230VUC 24VDC2A

TERMSERIES, Solid-state relay, Rated control voltage: 230 V UC ±10% , Rated switching voltage: 3...33 V DC, Continuous current: 2 A, Screw connection

Produkt ID 1127220000
Åbn i konfiguratoren
Download datablad Engineering Support Product Downloads
Tilbehør 25 Enkeltdele 2 Anvendte produkter 11
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Rated data UL Control side Load side General data Insulation coordination Further details of approvals / standards Connection data Classifications

Approvals

認可
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319234/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULus)
E141197 

General ordering data

バージョン
TERMSERIES, Solid-state relay, Rated control voltage: 230 V UC ±10% , Rated switching voltage: 3...33 V DC, Continuous current: 2 A, Screw connection 
注文番号
1127220000 
種別
TOS 230VUC 24VDC2A 
GTIN (EAN)
4032248908790 
Qty.
10 Styk

Dimensions and weights

深さ
87.8 mm
Depth (inches)
3.457 inch
高さ
89.6 mm
Height (inches)
3.528 inch
幅
6.4 mm
Width (inches)
0.252 inch
Net weight
32.4 g

Temperatures

保管温度
-40 °C...70 °C 
周囲温度
-20 °C…60 °C 
Humidity
5-95% relative humidity, Tu = 40°C, without condensation 

Probability of failure

MTTF
675 a

Environmental Product Compliance

RoHS 対応状況
Compliant with exemption 
RoHS 適用除外（該当する場合/既知の場合）
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
9e2cbc49-76d9-4611-b8ec-5b4f549a0aa9 

Rated data UL

周囲温度（動作）最大
60 °C
Connection cross-section AWG, min.
AWG 26 
Connection cross-section AWG, max.
AWG 14 
Type of conductor
rigid copper conductor 
flexible copper conductor 
Tightening torque, max.
0.4 Nm
Pollution severity level
2 

Control side

定格制御電圧
230 V UC ±10% 
Nominal control current
3.5 mA AC (±5 %) 
2.9 mA DC (±5 %) 
公称出力
670 mW 
805 mVA 
Status indicator
Green LED 
Protective circuit
Rectifier 
Input frequency
3 Hz 
Coil voltage of the replacement relay deviating from the rated control voltage
Yes 
交換用リレーのコイル電圧
60 V DC 

Load side

Névleges kapcsolási feszültség
3...33 V DC 
Intensidad permanente
2 A 
Rated switching current
2 A 
Špičkový proud
15 A / 10 ms 
Odložení zapnutí
<7 ms 
Switch-off delay
<10 ms 
Voltage drop at max. load
≤ 120 mV 
Prąd upływowy
<10 µA 
Min. switching current
5 mA
Kortslutningssäker
No 
Protective circuit, load side
Free-wheeling diode 
Contact type
1 NO contact (MOS-FET) 
最大回路周波数（AC 制御電圧）
3 Hz
max. switching frequency (DC control voltage)
3 Hz

General data

取り付けレール
TS 35 
テストボタンが使用可能
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-0
  • Component:
    Retaining clip
  • UL94 flammability rating:
    V-0

Insulation coordination

定格電圧
300 V
汚染度
2 
サージ電圧カテゴリー
III 
Clearance and creepage distances for control side - load side
≥ 5.5 mm 
Dielectric strength for control side - load side
2.5 kVeff 
Dielectric strength to mounting rail
4 kVeff / 1 Min. 
Impulse withstand voltage
6 kV (1.2/50 µs) 
Вид защиты
IP20 

Further details of approvals / standards

Certificate No. (DNV)
TAA00001E5 
Č. osvědčení (cULus)
E141197 

Connection data

導体接続方法
Screw connection 
被覆剝き長さ、定格接続
8 mm
Tightening torque, max.
0.4 Nm
Clamping range, rated connection
1.5 mm²
Clamping range, min.
0.14 mm²
2.5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0.14 mm²
Wire cross-section, solid, max.
2.5 mm²
Wire cross-section, solid, min. (AWG)
AWG 26 
Wire cross-section, solid, max. (AWG)
AWG 14 
Wire connection cross section, finely stranded, min.
0.14 mm²
Wire connection cross section, finely stranded, max.
2.5 mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26 
Wire cross-section, finely stranded, max. (AWG)
AWG 14 
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0.25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2.5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0.25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2.5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
0.5 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1 mm²
Blade size
size PH0 

Classifications

ETIM 8.0
EC001504 
ETIM 9.0
EC001504 
ETIM 10.0
EC001504 
ECLASS 14.0
27-37-16-04 
ECLASS 15.0
27-37-16-04