TS 35X7.5/5X18 2M/ST/SZ
Product image
Similar to illustration
TS 35X7.5/5X18 2M/ST/SZ
Product image
Similar to illustration
TS 35X7.5/5X18 2M/ST/SZ

TS 35X7.5/5X18 2M/ST/SZ

Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm

Produkt ID 1879090000
Åbn i konfiguratoren
Download datablad Engineering-support Produktdownloads
Tilbehør 20 Anvendte produkter 22
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Mounting rail Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm 
Order No.
1879090000 
Type
TS 35X7.5/5X18 2M/ST/SZ 
GTIN (EAN)
4032248473786 
Qty.
40 

Dimensions and weights

Depth
7,5 mm
Depth (inches)
0,295 inch
Height
35 mm
Height (inches)
1,378 inch
Width
2 000 mm
Width (inches)
78,74 inch
Net weight
264,815 g

Temperatures

Ambient temperature
-5 °C…40 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Mounting rail

Drill-hole diameter
5,2 mm
Felületi minőség
galvanic zinc plated and passivated 
Forrasztószem lyukátmérő (D)
5,2 mm
Kortvarigt strömmotstånd per sekund motsvarande IEC 60947-7-2
1,92 kA
Length of the terminal rail
  • min.:
    0 mm
  • nominal:
    2 000 mm
  • max.:
    2 000 mm
Materiale di base
Steel 
Otwór, nacięcie
Yes 
Pre-punched mounting rail
Yes 
Short circuit strength corresponds to E-Cu wire
16 mm²
Slit gap
  • min.:
    7 mm
  • nominal:
    7 mm
  • max.:
    7 mm
Slit length
  • min.:
    18 mm
  • nominal:
    18 mm
  • max.:
    18 mm
Slit width
5,2 mm
Slit width
  • min.:
    5 mm
  • nominal:
    5 mm
  • max.:
    5 mm
Spacing of holes, centre-to-centre
25 mm
Spessore
1 mm
Szabványok
DIN EN 60715 
Telepítési útmutató
Direct mounting 
Длина шлица
18 mm
Расстояние между шлицами
7 mm

Important note

Product information
Din rails with Sendzimier treatment have limited corrosion resistance on the outer and cut edges 

Classifications

ETIM 8.0
EC001285 
ETIM 9.0
EC001285 
ETIM 10.0
EC001285 
ECLASS 14.0
27-40-06-02 
ECLASS 15.0
27-40-06-02