VPU AC I F 3+1 275/25
VPU AC I F 3+1 275/25

VPU AC I F 3+1 275/25

Surge voltage arrester, Low voltage, Surge protection, TN-S, TT

Produkt ID 3022910000
Åbn i konfiguratoren
Download datablad Engineering Support Product Downloads
Tilbehør 8 Reservedele 4 Anvendte produkter 3
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Important note Product images Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, Surge protection, TN-S, TT 
Order No.
3022910000 
Type
VPU AC I F 3+1 275/25 
GTIN (EAN)
4099986942196 
Qty.
1 Styk

Dimensions and weights

Depth
86 mm
Depth (inches)
3,386 inch
Height
90 mm
Height (inches)
3,543 inch
Width
144 mm
Width (inches)
5,669 inch
Net weight
1.032 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
…85 °C 
Operating temperature
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Anschlussart
PUSH IN 

General data

Colour
orange 
black 
Design
Installation housing; 8 TE 
Insta IP 20 
Mounting rail
TS 35 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 in installed state 
Provozní nadmořská výška
≤ 2000 m 
Suitable for
Count-in installation (leakage current free) 
UL 94 flammability rating
V-0 
Version
Surge protection 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Rated data IEC / EN

czasowe przepięcie - TOV
442 V
Discharge current Imax (8/20µs) N-PE
130 kA 
Discharge current Imax (8/20µs) wire-PE
65 kA 
Discharge current In (8/20µs) N-PE
100 kA 
Discharge current In (8/20µs) wire-PE
25 kA 
Energy coordination (≤10 m)
Type I 
Type II 
Type III 
Follow-on current extinguishing capability Ifi
Not available due for technical reasons 
Frekvensområde, max.
60 Hz
Frequency range, min.
50 Hz
Integrated back-up fuse
Yes 
Jelzőérintkező
No 
Lightning test current Iimp (10/350 µs) (L-PE)
25 kA
Lightning test current, Iimp (10/350 µs) (N-PE)
100 kA 
Mains voltage
230 V / 400 V 
Max. continuous voltage, Uc (AC)
275 V 
Max. continuous voltage, Uc (N-PE)
305 V
Protection level Up at IN (L/N-PE)
≤ 1.9 kV 
Requirements category acc. to IEC 61643-11
Type I 
Type II 
Type III 
Requirements class, acc. to EN 61643-11
T1 
T2 
T3 
Rete a bassa tensione
TN-S 
TT 
Short-circuit current rating ISCCR
100 kA
Standards
IEC 61643-11 
EN 61643-11 
Suitable for
Count-in installation (leakage current free) 
Tension nominale (AC)
230 V
Voltage type
AC 
Время реакции/время перехода в аварийный режим
<100 ns 
Количество полюсов
4 
보호 레벨 Up I에서N (N-PE)
≤ 1.5 kV 

Connection data

Stripping length
18 mm
Wire connection method
Screw connection 
Stripping length, rated connection
18 mm
Tightening torque, min.
3 Nm
Tightening torque, max.
4,5 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
1,5 mm²
35 mm²
Wire cross-section, solid, min.
1,5 mm²
Wire cross-section, solid, max.
35 mm²
Wire connection cross section, finely stranded, min.
1,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Connection cross-section, stranded, min.
1,5 mm²
Connection cross-section, stranded, max.
35 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
4 
Protection degree
IP20 in installed state 
Colour
orange 
black 

Guarantee

Time interval
5 years 

Important note

Product information
If F1 > 315A gG, then the integrated backup fuse always operates before F1 

Product images

Classifications

ETIM 8.0
EC001457 
ETIM 9.0
EC001457 
ETIM 10.0
EC001457 
ECLASS 14.0
27-17-12-04 
ECLASS 15.0
27-17-12-04