CRMKIT P 115VAC 2CO L UL

CRMKIT P 115VAC 2CO L UL

, Number of contacts: 2, CO contact AgNi, Rated control voltage: 115 V AC, Continuous current: 12 A, PUSH IN, Test button available: No

Product ID 8000158954
Gegevensblad downloaden Product Downloads
Verwante producten 112
General ordering data Dimensions and weights Temperatures Control side Load side General data Insulation coordination Connection data Classifications

General ordering data

Versión
, Number of contacts: 2, CO contact AgNi, Rated control voltage: 115 V AC, Continuous current: 12 A, PUSH IN, Test button available: No 
Order No.
8000158954 
Type
CRMKIT P 115VAC 2CO L UL 

Dimensions and weights

Profundidad
72,5 mm
Depth (inches)
2,854 inch
Height
97 mm
Height (inches)
3,819 inch
Width
31 mm
Width (inches)
1,22 inch

Temperatures

Ambient temperature
-20 °C…70 °C 

Control side

Rated control voltage
115 V AC 
Rated current AC
72.6 mA 
Power rating
1.8 VA 
코일 저항
158 Ω ± 10 % 
Status indicator
Green LED 
Coil voltage of the replacement relay deviating from the rated control voltage
No 
Tensione bobina del relè sostitutivo
24 V AC 

Load side

Rated switching voltage
250 V AC 
Continuous current
12 A 
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
AC switching capacity (resistive), max.
3000 
DC switching capacity (resistive), max.
288 W @ 24 V 
Задержка включения
≤ 20 ms 
Switch-off delay
≤ 12 ms 
Contact type
2 CO contact (AgNi) 
Mechanical service life
2 x 107 switching cycles 

General data

Altitudine di esercizio
≤ 2000 m 
above sea level 
Mounting rail
TS 35 
Levier de forçage disponible
No 
Colour
black 
UL94 flammability rating component
  • Component:
    Socket
  • UL94 flammability rating:
    V-0
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2

Insulation coordination

Pollution severity
2 
Surge voltage category
II 
Spänningstålighet styrsida - lastsida
4 kVeff / 1 Min. 
Wytrzymałość dielektryczna sąsiadujących styków
3 KVeff / 1 Min. 
Dielectric strength to mounting rail
3 kVeff / 1 min. 
Grado di protezione
IP20 

Connection data

Wire connection method
PUSH IN 
Stripping length, rated connection
8 mm
Clamping range, rated connection
1,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
1,5 mm²
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire cross-section, solid, min. (AWG)
AWG 20 
Wire cross-section, solid, max. (AWG)
AWG 16 
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Twin wire-end ferrules, max.
1,5 mm²
Blade size
0.6 x 3.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01