Eigenschappen
| Version | FieldPower® power supply unit, IP65, in closed state, in complete state, 10A, 48 V, DC, PUSH IN |
| Order No. | 2887630000 |
| Type | FP PRO TOP3 48/10 3M |
| GTIN (EAN) | 4064675859888 |
| Qty. | 1 items |
| Depth | 220 mm |
| Depth (inches) | 8,661 inch |
| Height | 196 mm |
| Height (inches) | 7,717 inch |
| Width | 196 mm |
| Width (inches) | 7,717 inch |
| Net weight | 5.192 g |
| Storage temperature | -40 °C...85 °C |
| Operating temperature | -25 °C...45 °C |
| Operating temperature range | -25 °C ... +50 °C (regard derating) Start up ≥ -40 °C |
| Humidity | 35…85%, non condensing and non freezing |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 6c |
| REACH SVHC |
Lead 7439-92-1
Potassium perfluorobutane sulfonate 29420-49-3 |
| SCIP | 7645f3b1-6db9-495d-9e21-ab1d894aff05 |
| AC current consumption | 1,5 A @ 400 V DC / 2 A @ 320 V AC |
| AC input voltage range | 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC |
| Connection system | IDC terminal |
| DC input voltage range | 450...800 V DC (max. 500 V DC acc. to UL508) |
| Frequency range AC | 45…65 Hz |
| Input fuse (internal) | No |
| Inrush current | Max. 10 A |
| Recommended back-up fuse | 3 - 5 A, Char C |
| Surge protection | Varistor |
| Wire connection method | PUSH IN |
| Adjustable rated current | No |
| Nominal output current for Unom | 10 A @ 60 °C |
| Output current | 10A |
| Output power | 480 W |
| Output voltage | 48 V |
| Output voltage type | DC |
| Output voltage, max. | 56 V |
| Output voltage, min. | 45 V |
| Output voltage, note | (adjustable via potentiometer) |
| Rated output voltage | 48 V DC ± 1 % |
| Surge protection | Varistor |
| Switch-on delay | 1 s |
| Triggering characteristic | see characteristic curve |
| Wire connection method | PUSH IN |
| Humidity | 35…85%, non condensing and non freezing |
| Installation advice | Lid screws included |
| Protection degree |
IP65
in closed state in complete state |
| Short-circuit protection |
Yes
internal |
| Surge voltage category |
III
II |
| Surge voltage category |
III
II |
| Connection system | IDC terminal |
| AC current consumption | 1,5 A @ 400 V DC / 2 A @ 320 V AC |
| AC input voltage range | 3 x 320...3 x 575 V AC / 2 x 360...2 x 575 V AC |
| DC input voltage range | 450...800 V DC (max. 500 V DC acc. to UL508) |
| Frequency range AC | 45…65 Hz |
| Recommended back-up fuse | 3 - 5 A, Char C |
| Surge protection | Varistor |
| Inrush current | Max. 10 A |
| Input fuse (internal) | No |
| Adjustable rated current | No |
| Output current | 10A |
| Output power | 480 W |
| Output voltage | 48 V |
| Output voltage type | DC |
| Output voltage, max. | 56 V |
| Output voltage, min. | 45 V |
| Output voltage, note | (adjustable via potentiometer) |
| Switch-on delay | 1 s |
| Triggering characteristic | see characteristic curve |
| Rated output voltage | 48 V DC ± 1 % |
| Nominal output current for Unom | 10 A @ 60 °C |
| Approval/Certificate/Document of Conformity | [Manufacturer's Declaration FieldPower® PROtop](https://mdcop.weidmueller.com/mediadelivery/asset/900_263979) |
| User Documentation | [Manual FieldPower® PROtop](https://mdcop.weidmueller.com/mediadelivery/asset/900_225321) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC002540 |
| ETIM 7.0 | EC002540 |
| ETIM 8.0 | EC002540 |
| ETIM 9.0 | EC002540 |
| ECLASS 9.1 | 27-04-07-01 |
| ECLASS 10.0 | 27-04-07-01 |
| ECLASS 11.0 | 27-04-07-01 |
| ECLASS 12.0 | 27-04-07-01 |
| ECLASS 13.0 | 27-04-90-02 |
| ECLASS 14.0 | 27-04-07-01 |
| ROHS | Conform |
Toebehoren
-
Product ID:1961770000VPE:1 items
Field Power® plug-in connector, Fuse, IP20, Polyamide, PUSH IN,Number of poles : 5
-
Product ID:1252210000VPE:1 items
Field Power® plug-in connector, Fuse, IP20, Polyamide, PUSH IN,Number of poles : 5
-
-
Product ID:1772460000VPE:100 items
SKMU PA (plastic locknut), Locknut, M 20, 6 mm, Polyamid 6 (PA6 - GF30)
-
Product ID:4329610000VPE:10 items
Field Power® sealing insert, Foldable seal, IP65 with corresponding housing, IP65, with corresponding enclosure, EPDM
-
Product ID:1114530000VPE:10 items
Field Power® sealing insert, Seal, IP54, with corresponding enclosure, EPDM
-
Product ID:2443760000VPE:10 items
Field Power® sealing insert, Slotted sealing insert, IP54, in combination with RKDG D17 PT6, with corresponding enclosure, TPE-V
-
Product ID:1069060000VPE:10 items
Field Power® sealing insert, Seal, IP54, with corresponding enclosure, EPDM
-
Product ID:4324010000VPE:10 items
Field Power® sealing insert, Foldable seal, IP65 with corresponding housing, IP65, with corresponding enclosure, EPDM
-
Product ID:2443800000VPE:10 items
Field Power® sealing insert, Slotted sealing insert, IP54, in combination with RKDG D17 PT6, with corresponding enclosure, TPE-V
-
Product ID:4323230000VPE:10 items
Field Power® sealing insert, Foldable seal, IP65 with corresponding housing, IP65, with corresponding enclosure, EPDM
-
Product ID:2545540000VPE:1 items
Field Power® sealing insert, Seal with connection thread, IP65, with corresponding enclosure, EPDM
-
Product ID:2491870000VPE:10 items
Field Power® sealing insert, Seal, IP54, with corresponding enclosure, EPDM
-
Product ID:4323240000VPE:10 items
Field Power® sealing insert, Blank seal, IP65, with corresponding enclosure, EPDM
-
Product ID:4323210000VPE:10 items
Field Power® sealing insert, Foldable seal, IP65 with corresponding housing, IP65, with corresponding enclosure, EPDM
-
Product ID:2545550000VPE:1 items
Field Power® sealing insert, Seal with connection thread, IP65, with corresponding enclosure, EPDM
-
Product ID:4323220000VPE:10 items
Field Power® sealing insert, Foldable seal, IP65 with corresponding housing, IP65, with corresponding enclosure, EPDM
-
-
Product ID:2633450000VPE:5 items
Field Power® terminal rail, Steel, galvanized, 142 mm, for base part
-
Product ID:1170690000VPE:10 items
Field Power® terminal rail, Steel, galvanized, 54 mm, for base part
-
Product ID:2633460000VPE:5 items
Field Power® terminal rail, Steel, galvanized, 230 mm, for base part
-
Product ID:2633750000VPE:5 items
Field Power® terminal rail, Steel, galvanized, 110 mm, for aluminium lid
-
Product ID:2633730000VPE:5 items
Field Power® terminal rail, Steel, galvanized, 80 mm, for aluminium lid
-
Product ID:2633780000VPE:5 items
Field Power® terminal rail, Steel, galvanized, 170 mm, for aluminium lid
-
Product ID:2633760000VPE:5 items
Field Power® terminal rail, Steel, galvanized, 145 mm, for aluminium lid
-
Product ID:8000046634VPE:5 items
Field Power® terminal rail, Steel, galvanized, 68 mm, for aluminium lid
-
Product ID:1009990000VPE:10 items
Field Power® plug-in connector, DC, IP20, Polyamide, PUSH IN, Number of poles : 2 x 5
-
Product ID:1952120000VPE:10 items
Field Power® plug-in connector, 3-phase AC, IP20, Polyamide, PUSH IN, Number of poles : 5
-
Product ID:1952130000VPE:10 items
Field Power® plug-in connector, 3-phase AC, IP20, Polyamide, PUSH IN, Number of poles : 2 x 5
-
Product ID:1131730000VPE:10 items
Field Power® plug-in connector, DC, IP20, Polyamide, PUSH IN, Number of poles : 5
-
Product ID:1957620000VPE:1 items
FieldPower® contact element, AC, IP20, Insulation displacement connection (IDC), PUSH IN, Number of poles : 5
-
Product ID:1772300000VPE:50 items
VG K (standard plastic cable gland), Cable glands, straight, M 20, 10 mm, OD min. 6 - OD max. 12 mm, IP54, IP66, IP67, IP68 - 5 bar (30 min.), Polyamide 6
-
Product ID:2811470000VPE:50 items
VG K (standard plastic cable gland), Cable glands, straight, M 20, 10 mm, OD min. 10 - OD max. 14 mm, IP54, IP66, IP67, IP68 - 5 bar (30 min.), Polyamide 6
-
Product ID:1532210000VPE:1 items
Adapter, Field Power® sealing insert, HQ adapter, IP65, with corresponding enclosure, Polycarbonate, glass fibre reinforced, lockable: Yes
-
Product ID:1532200000VPE:1 items
Adapter, Field Power® sealing insert, HQ adapter, IP65, with corresponding enclosure, Polycarbonate, glass fibre reinforced, lockable: No
-
Product ID:1126840000VPE:1 items
FieldPower® contact element, DC, IP20, Insulation displacement connection (IDC), PUSH IN, Number of poles : 5