KLIPPON BDX M20 S
Similar to illustration

KLIPPON BDX M20 S

Klippon BDX (compensating elements), Compensating element, M 20, 10 mm, IP66, Stainless steel 1.4404 (316L)

Tuotteen tunnus 2519550000
Lataa tietosivu Engineering Support
Samankaltaiset tuotteet 5
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Certificate numbers cable gland General information Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Klippon BDX (compensating elements), Compensating element, M 20, 10 mm, IP66, Stainless steel 1.4404 (316L) 
Order No.
2519550000 
Type
KLIPPON BDX M20 S 
GTIN (EAN)
4050118532043 
Qty.
1 items

Dimensions and weights

Height
12 mm
Height (inches)
0,472 inch
Bredd
27 mm
Width (inches)
1,063 inch
Length
22 mm
Length (inches)
0,866 inch
Net weight
60 g

Temperatures

Operating temperature
-60 °C...200 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Certificate numbers cable gland

Azonosítás
Ex e IIC Gb 
Ex ta IIIC Da 
Nr certyfikatu przepustu kablowego (IECEx)
IECEx CML 19.0105X 
Numero del certificato pressacavo (ATEX)
CML 19ATEX3347X 
Условия утверждения
ATEX 
IECEX 
UL AEx Class Div. 
UL AEx Class Zone 
케이블 글랜드(CSA) 인증 번호
E340660 

General information

AF size 1
27 mm
Air flow
0.25 l / 1 h 
Basic material
Stainless steel 1.4404 (316L) 
Cable gland
M 20 
Couple contre-écrou, max.
5 Nm
External thread
M 20 
Filter
Bronze insert (90% copper, 10% tin) 
Halogen
halogen-free 
Head diameter
26,2 mm
Impact resistance
7 J ATEX version 
Length of thread
10 mm
O-Ring
Silicone 
Operating temperature range, max.
200 °C
Operating temperature range, min.
−60 °C
Pitch of thread
1,5 mm
Poznámka: třída ochrany
- The venting element should be fitted on the bottom side of the enclosure, aligned vertically with the thread upwards, and at the lowest point to permit proper drainage. - The supplied assembly instructions must be read prior to installation and strictly adhered to. - The water flow rate was tested using a water-filled, empty enclosure (no pressure or heat-producing internal components). The water flow rate may vary due to operational parameters and environmental conditions. 
Protection class (UL)
Type 4 
Protection degree
IP66 
Protection degree with GWDR
IP66 
Sealing
Silicone 
Silicone
Yes 
Standards
IEC 60079-0 
IEC 60079-7 
IEC 60079-31 
Tightening torque
5 Nm
Tipo de protección contra el fuego
Ex e 
Torque for connecting adapter, max.
5 Nm
Torque for connecting adapter, min.
5 Nm
Torque for lock nut, min.
5 Nm

Classifications

ETIM 8.0
EC000814 
ETIM 9.0
EC000814 
ETIM 10.0
EC000814 
ECLASS 14.0
27-18-28-17 
ECLASS 15.0
27-18-28-17