LM2NZF 5.08/18/135 3.5SN OR BX
Product image
Similar to illustration
LM2NZF 5.08/18/135 3.5SN OR BX
Dimensional drawing
LM2NZF 5.08/18/135 3.5SN OR BX
Graph

LM2NZF 5.08/18/135 3.5SN OR BX

Printed circuit board terminals, 5.08 mm, Number of poles: 18, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box

Produkt ID 1764880000
Download datablad Engineering Support Product Downloads
Anvendte produkter 19
Approvals General ordering data Dimensioni e pesi Environmental Product Compliance Parametri del sistema Dati del materiale Conduttori adatti al collegamento Données nominales selon CEI Rated data acc. to CSA Rated data acc. to UL 1059 Imballaggio Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Printed circuit board terminals, 5.08 mm, Number of poles: 18, 135°, Solder pin length (l): 3.5 mm, orange, Tension-clamp connection, Clamping range, max. : 2.5 mm², Box 
Order No.
1764880000 
Type
LM2NZF 5.08/18/135 3.5SN OR BX 
GTIN (EAN)
4032248103119 
Qty.
20 Styk
Product data
IEC: 630 V / 15 A / 0.2 - 2.5 mm²
UL: 300 V / 10 A / AWG 24 - AWG 14 
Packaging
Box 

Dimensioni e pesi

Depth
24,05 mm
Tiefe (inch)
0,947 inch
Height
29,1 mm
Height (inches)
1,146 inch
Height of lowest version
25,6 mm
Width
46,42 mm
Width (inches)
1,828 inch
Net weight
25,45 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Parametri del sistema

Product family
OMNIMATE信号 – シリーズLMZF 
Wire connection method
Tension-clamp connection 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
135° 
Pitch in mm (P)
5,08 mm
Pitch in inches (P)
0,2 "
Number of poles
18 
Polreihenzahl
2 
Fitted by customer
No 
Number of rows
2 
Solder pin length (l)
3,5 mm
Solder pin dimensions
0.7 x 1.0 mm 
Solder eyelet hole diameter (D)
1,3 mm
Bestückungsloch-Durchmesser Toleranz (D)
+ 0,1 mm 
Number of solder pins per pole
1 
Screwdriver blade
0,6 x 3,5 
Lama cacciavite norma
DIN 5264-A 
Stripping length
7,5 mm
L1 в мм
40,64 mm
L1 in pollici
1,6 "
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 
Volume resistance
2.10 mΩ 

Dati del materiale

Insulating material
PA 
Colour
orange 
Colour chart (similar)
RAL 2000 
Insulating material group
I 
Comparative Tracking Index (CTI)
≥ 600 
Brennbarkeitsklasse nach UL 94
V-0 
Contact material
Cu-alloy 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
100 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
100 °C

Conduttori adatti al collegamento

Clamping range, min.
0,13 mm²
2,5 mm²
Wire connection cross section AWG, min.
AWG 24 
Wire connection cross section AWG, max.
AWG 14 
Solid, min. H05(07) V-U
0,2 mm²
Solid, max. H05(07) V-U
2,5 mm²
Flexible, min. H05(07) V-K
0,2 mm²
Flexible, max. H05(07) V-K
1,5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,25 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
1,5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,25 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
1,5 mm²
Zasuňte měřič v souladu s EN 60999 a x b; ø
2.4 mm x 1.5 mm 
Upínatelný vodič
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1,5 mm²
  • Embout:
    • Longueur de dénudage:
      • nominal:
        7 mm
    • Embout recommandé:
      0372700000
Reference text
Choisissez la longueur des embouts en fonction du produit et de la tension nominale. 
Le diamètre extérieur du collier plastique ne doit pas être plus grand que le pas (P) 

Données nominales selon CEI

testé selon la norme
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
15 A
Rated current, max. number of poles (Tu=20°C)
12 A
Rated current, min. number of poles (Tu=40°C)
13 A
Rated current, max. number of poles (Tu=40°C)
10 A
Rated voltage for surge voltage class / pollution degree II/2
630 V
Rated voltage for surge voltage class / pollution degree III/2
320 V
Rated voltage for surge voltage class / pollution degree III/3
250 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
4 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
4 kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
10 A
Rated current (Use group D / CSA)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 14 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
Nennspannung (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
10 A
Nennstrom (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 14 

Imballaggio

Packaging
Box 
VPE length
184 mm
VPE width
110 mm
VPE height
39 mm

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01