MTS 5/01 H T4 B T
Product image
MTS 5/01 H T4 B T
Product image
MTS 5/01 H T4 B T
MTS 5/01 H T4 B T
MTS 5/01 H T4 B T
MTS 5/01 H T4 B T

MTS 5/01 H T4 B T

Клемма печатной платы, Клемма печатной платы, Соединение THT/THR под пайку, Шаг в мм (P): 5.00 mm, Количество полюсов: 1, Tube

Produkt ID 3096000000
Download datablad Engineering-support Produktdownloads
Tilbehør 2 Anvendte produkter 12
Approvals Основные данные для заказа Wymiary i masa Температуры Экологическое соответствие изделия Системные параметры Dane materiałowe Przewody pasujące do złącza Dane znamionowe wg IEC Rated data acc. to CSA Rated data acc. to UL 1059 Viktig hänvisningstext Klassificeringar

Approvals

ROHS
Conform 

Основные данные для заказа

Version
Клемма печатной платы, Клемма печатной платы, Соединение THT/THR под пайку, Шаг в мм (P): 5.00 mm, Количество полюсов: 1, Tube 
Order No.
3096000000 
Type
MTS 5/01 H T4 B T 
GTIN (EAN)
4099987119504 
Qty.
72 Styk
Product data
IEC: 400 V / 32 A / 0.5 - 4 mm²
UL: 300 V / 20 A / AWG 20 - AWG 12 
Packaging
Tube 

Wymiary i masa

Depth
18,85 mm
Głębokość (cale)
0,742 inch
Height
16,7 mm
Bygghöjd (tum)
0,657 inch
Höjd lägstbyggande
13,2 mm
Width
7,3 mm
Width (inches)
0,287 inch
Net weight
2 g

Температуры

Ambient temperature
-50 °C…125 °C 
Installation temperature
-25 °C to +125 °C 

Экологическое соответствие изделия

RoHS Compliance Status
Соответствует без исключения 
REACH SVHC
No SVHC above 0.1 wt% 

Системные параметры

Product family
OMNIMATE 4.0 
Wire connection method
SNAP IN med manöverknapp 
Property, clamping point
WireReady 
montaż na płytce drukowanej
THT/THR solder connection 
Kierunek odejścia przewodu
90° 
Raster w mm (P)
5 mm
Raster w calach (P)
0,197 "
Number of poles
1 
Pin series quantity
1 
Number of rows
1 
Solder pin length (l)
3,5 mm
Solder pin dimensions
0.6 x 0.8 mm 
Solder eyelet hole diameter (D)
1,3 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Number of solder pins per pole
2 
Stripping length
9 mm
Stripping length tolerance
  • min.:
    8 mm
  • max.:
    10 mm
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 

Dane materiałowe

Insulating material
PA 9T 
Colour
черный 
kolor elementów uruchamiających
grön 
Colour chart (similar)
RAL 9011 
Insulating material group
I 
Comparative Tracking Index (CTI)
≥ 600 
Moisture Level (MSL)
1 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Contact surface
tinned 
Tinning type
matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
125 °C

Przewody pasujące do złącza

Clamping range, min.
0,34 mm²
Clamping range, max.
4 mm²
Wire connection cross section AWG, min.
AWG 20 
Wire connection cross section AWG, max.
AWG 12 
Solid, min. H05(07) V-U
0,5 mm²
Solid, max. H05(07) V-U
2,5 mm²
Flexible, min. H05(07) V-K
0,5 mm²
Flexible, max. H05(07) V-K
4 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0,34 mm²
w. plastic collar ferrule, DIN 46228 pt 4, max.
2,5 mm²
w. wire end ferrule, DIN 46228 pt 1, min.
0,5 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2,5 mm²
Outer diameter of insulation, max.
4 mm

Dane znamionowe wg IEC

przetestowane zgodnie z normą
IEC 60664-1 
IEC 61984 
Rated current, min. number of poles (Tu=20°C)
32 A
Rated current, max. number of poles (Tu=20°C)
32 A
Rated current, min. number of poles (Tu=40°C)
32 A
Rated current, max. number of poles (Tu=40°C)
32 A
Rated voltage for surge voltage class / pollution degree II/2
400 V
Rated voltage for surge voltage class / pollution degree III/2
400 V
Rated voltage for surge voltage class / pollution degree III/3
250 V
Rated impulse voltage for surge voltage class/ pollution degree II/2
4 kV
Rated impulse voltage for surge voltage class/ pollution degree III/2
4 kV
Rated impulse voltage for surge voltage class/ contamination degree III/3
4 kV

Rated data acc. to CSA

Wire cross-section, AWG, min.
AWG 20 
Wire cross-section, AWG, max.
AWG 12 

Rated data acc. to UL 1059

Rated voltage (Use group B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated voltage (Use group F / UL 1059)
420 V
Rated current (Use group B / UL 1059)
20 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 20 
Wire cross-section, AWG, max.
AWG 12 
Clearance distance, min.
4 mm
Creepage distance, min.
5,6 mm

Viktig hänvisningstext

IPC conformity
Konformitet: Produkterna utvecklas, tillverkas och levereras i enlighet med internationellt erkända standarder och normer, och uppfyller de egenskaper som garanteras i databladet resp. har designegenskaper i enlighet med IPC-A-610 "Klass 2". Övriga anspråk gällande produkterna kan bedömas på begäran. 
Notes
  • Rated current related to rated cross-section & min. No. of poles.
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • During transport, it may rarely occur that the clamping points are already closed. The products remain fully functional. To reactivate the SNAP IN function, please press the activation button.
  • When using a 1-pole PCB terminal block, it must be supported in the application.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Klassificeringar

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01