DRIKITP 115VAC 2CO LD
Product image
Similar to illustration
DRIKITP 115VAC 2CO LD
Wiring diagram
DRIKITP 115VAC 2CO LD
Graph
DC load limit curve
Resistive load
DRIKITP 115VAC 2CO LD
Graph
Electrical service life
DRIKITP 115VAC 2CO LD
Graph
AC operational voltage range
DRIKITP 115VAC 2CO LD
Dimensional drawing
Relay in combination with base
DRIKITP 115VAC 2CO LD
Miscellaneous
Type codes

DRIKITP 115VAC 2CO LD

D-SERIES DRI, 릴레이 모듈, 접점 개수: 2, CO 접점 AgSnO, 정격 제어 전압: 115 V AC, 연속 전류: 5 A, PUSH IN, 테스트 버튼 사용 가능: No

Produkt ID 2576290000
Åbn i konfiguratoren
Download datablad Engineering Support Product Downloads
Tilbehør 9 Enkeltdele 3 Anvendte produkter 8
Omologazioni 일반 주문 데이터 Dimensioni e pesi 온도 환경 제품 규정 준수 lato di comando Belastningssida Общие данные Insulation coordination Further details of approvals / standards 결선 데이터 Classifications

Omologazioni

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

일반 주문 데이터

Version
D-SERIES DRI, 릴레이 모듈, 접점 개수: 2, CO 접점 AgSnO, 정격 제어 전압: 115 V AC, 연속 전류: 5 A, PUSH IN, 테스트 버튼 사용 가능: No 
Order No.
2576290000 
Type
DRIKITP 115VAC 2CO LD 
GTIN (EAN)
4050118586053 
Qty.
10 Styk

Dimensioni e pesi

Depth
63 mm
Depth (inches)
2,48 inch
Height
102,1 mm
Height (inches)
4,02 inch
Width
15,9 mm
Šířka (v palcích)
0,626 inch
Net weight
59,32 g

온도

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…55 °C 
Humidity
35...85 % rel. humidity, no condensation 

환경 제품 규정 준수

RoHS Compliance Status
준수, 예외 미존재 
REACH SVHC
No SVHC above 0.1 wt% 

lato di comando

Jmenovité řídicí napětí
115 V AC 
Rated current AC
9.3 mA 
Power rating
1.1 VA 
Coil resistance
6200 Ω ± 10 % 
Status indicator
red LED 

Belastningssida

Rated switching voltage
250 V AC 
Continuous current
5 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Max. switching voltage, DC
250 V
Min. switching power
10 mA @ 24 V 
10 mA @ 12 V 
100 mA @ 5 V 
AC spínací výkon (odporový), max.
1250 VA 
DC spínací výkon (odporový), max.
150 W @ 24 V 
Switch-on delay
≤ 15 ms 
Switch-off delay
≤ 10 ms 
Contact type
2 CO contact (AgSnO) 
Mechanical service life
10 x 106 switching cycles 

Общие данные

Mounting rail
TS 35 
Test button available
No 
Mechanical switch position indicator
No 
Colour
black 
Komponent s klasifikací hořlavosti UL 94
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Pusher
  • UL94 flammability rating:
    HB
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
IIIb 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
5 kVeff / 1min 
Dielectric strength of neighbouring contacts
1.5 kVeff /1 min. 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
5 kV (1.2/50 µs) 
Impulse withstand voltage at neighbouring contacts
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E312083 

결선 데이터

Wire connection method
PUSH IN 
Stripping length, rated connection
10 mm
Rozsah sevření, jmenovité připojení
1,5 mm²
Upínací rozsah, min.
0,14 mm²
Upínací rozsah, max.
1,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Průřez vodiče, pevný, min.
0,14 mm²
Wire cross-section, solid, max.
1,5 mm²
Wire connection cross section, finely stranded, min.
0,14 mm²
Wire connection cross section, finely stranded, max.
1,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,14 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5 mm²
Dimens. caña destornillador
0.4 x 2.5 mm 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01