PVN1M6I4SXFXV1O1TXPX10
PVN1M6I4SXFXV1O1TXPX10
PCB design
PVN1M6I4SXFXV1O1TXPX10
PVN1M6I4SXFXV1O1TXPX10
PVN1M6I4SXFXV1O1TXPX10

PVN1M6I4SXFXV1O1TXPX10

Photovoltaik, Generatoranschlusskasten, PV Next, 1000 V, 6 MPP, 2 Eingänge/1 Ausgang pro MPP, Überspannungsschutz I / II, WM4C

Product ID 2737620000
Gegevensblad downloaden Productdownloads Engineeringondersteuning
Toebehoren 15 Is accessoire van 3 Contradelen 7 Onderdelen 2 Verwante producten 63
Approvals Allgemeine Bestelldaten Dimensions and weights Temperatures Umweltanforderungen Included in delivery Guarantee Electrical characteristics Enclosure General data Inputs Outputs Surge protection DC side DC load break switch Important note Clasificaciones Tender specification sheets

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
ROHS
Conforme 

Allgemeine Bestelldaten

Version
Photovoltaik, Generatoranschlusskasten, PV Next, 1000 V, 6 MPP, 2 Eingänge/1 Ausgang pro MPP, Überspannungsschutz I / II, WM4C 
Order No.
2737620000 
Type
PVN1M6I4SXFXV1O1TXPX10 
GTIN (EAN)
4050118824896 
Qté.
1 Pièce

Dimensions and weights

Depth
175 mm
Depth (inches)
6,89 inch
Height
334 mm
Altura (pulgadas)
13,15 inch
Width
558 mm
Largeur (pouces)
21,968 inch
Nettó tömeg
6.947 g

Temperatures

Ambient temperature
-40 °C…50 °C 
Páratartalom
5 – 90 % páralecsapódás nem megengedett 

Umweltanforderungen

RoHS Compliance Status
Konform mit Ausnahme 
RoHS Exemption (if applicable/known)
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
bdab5698-6a20-4370-8e28-8810d882d01a 

Included in delivery

Included accessories
  • Article:
    Mounting foot
  • Quantity:
    4

Guarantee

Time interval
5 years 

Electrical characteristics

Current per Maximum Power Point, max.
30 A
Rated DC current per connection
  • Current per string, max.:
    30 A
Rated DC voltage
1.000 V
Rated short-term current resistance
  • Rated current:
    37,5 A

Enclosure

Connection type string
Plug WM4C 
Enclosure attachment
Via mounting foots 
Impact resistance
IK08 in accordance with IEC 62208 
IK10 in accordance with IEC 62262 
Insulating material
Polyester glass-fibre reinforced, Polycarbonate 
Protection class
II 
Type of mounting
Wall mounting 
4 screws 

General data

Installation location
Protected outdoor area (Land and Sea) 
Protection degree
IP65 
Standards
EN 61643-31 

Inputs

Amount of maximum power points (MPP)
6 
DC Input + & -
  • Wire connection:
    • Type of connection:
      WM4C plug-in connector
    • Compatible cable crossection:
      EN 50618:2015
    • Wire cross-section, min.:
      4 mm²
    • Wire cross-section, max.:
      6 mm²
  • Cable entry:
    • Number of cable entries:
      12
Functional earth connector
  • Cable entry:
    • Number of cable entries:
      1
    • Cable diameter, min.:
      5 mm
    • Cable diameter, max.:
      10 mm
    • Cable gland:
      M 16
  • Wire connection:
    • Type of connection:
      Screw connection
    • Flexible, max. H05(07) V-K:
      25 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      16 mm²
Fuse type
Neither fuse cartridge nor holder 
Fuses
No 
Max. number of DC inputs
per Maximum Power Point 2 inputs connected in parallel 
Number of conduit inlets
12 
Number of string inputs per MPP
≤ 2 
Surge protection auxiliary contact
  • Cable entry:
    • Cable diameter, min.:
      5 mm
    • Cable diameter, max.:
      10 mm
    • Cable gland:
      M 16
  • Wire connection:
    • Type of connection:
      Tension clamp connection with actuator
    • Flexible, max. H05(07) V-K:
      1,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      1,5 mm²
Numero di ingressi
12 

Outputs

DC Output + & -
  • Wire connection:
    • Type of connection:
      WM4C plug-in connector
    • Compatible cable crossection:
      TÜV 2 Pfg1169/08.07
    • Wire cross-section, min.:
      4 mm²
    • Wire cross-section, max.:
      6 mm²
Max. number of DC outputs
per Maximum Power Point 1 output 

Surge protection DC side

Discharge current In (8/20 µs)
20 kA 
Discharge current, max. (8/20 µs)
40 kA
Lightning test current Iimp (10/350 µs)
6.25 kA 
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE
1.100 V
Protection level Up (+/- , -/PE , +/PE)
≤ 3.8 kV 
Protection level Up (+/-)
≤ 3.8 kV 
Protection level Up (+/PE)
≤ 3.8 kV 
Protection level Up (-/PE)
≤ 3.8 kV 
PV system voltage, max. Ucpv
1.100 V
Requirements class
Type I/II 
Short-circuit curent ISCPV
11.000 A
Standards
EN 61643-31 
Standby power consumption PC
<0.2 W 
Total discharge current Itotal ( 8/20µs)
50 kA
Total discharge current Itotal (10/350µs)
12,5 kA

DC load break switch

Switch disconnector execution
no switch 

Important note

Product information
The SCIP number was assigned due to a lead content of more than 0.1 % of the net weight.

Safe use instruction according to ECHA:
The identification of the hazardous substance is sufficient to allow safe use of the article throughout its life cycle, including the service life, disassembly and waste/recycling phase 

Clasificaciones

ETIM 8.0
EC003857 
ETIM 9.0
EC003857 
ETIM 10.0
EC003857 
ECLASS 14.0
22-57-02-92 
ECLASS 15.0
22-57-02-92 

Tender specification sheets

Long specification

Combiner box for inverters with 6 MPP tracker, suitable for protecting the DC side of a photovoltaic system according to EN 51543-32.

MPP1:
2 inputs, connection via WM4 C connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
1 output, connection via WM4 C connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

MPP2 to 6:
identical to MPP1

Max. string voltage Uoc: 1000V
1 class/type I + II combined arrester with signal contact
Connection of the signal contact via cable glands (8-12mmØ) max. conductor cross-section: 1.5mm²
Connection of the functional earth via cable glands (8-12mmØ) Conductor cross-section: 16-25mm²
Protection class: IP65
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 334x558x175 mm

Approval according to low voltage switchgear and controlgear IEC 61439-1:2011 and EN 61439-2:2011