LMFS 7.50/02/180 3.5SN OR BX
Product image
LMFS 7.50/02/180 3.5SN OR BX
Product image
LMFS 7.50/02/180 3.5SN OR BX
Dimensional drawing
LMFS 7.50/02/180 3.5SN OR BX
Derating curve
LMFS 7.50/02/180 3.5SN OR BX
Derating curve
LMFS 7.50/02/180 3.5SN OR BX
Product benefits
High reliability of the current capacity
LMFS 7.50/02/180 3.5SN OR BX
Product benefits
Direct conductor entry
Cross section up to 2.5 mm²
LMFS 7.50/02/180 3.5SN OR BX
Product benefits
Maintenance through test point

LMFS 7.50/02/180 3.5SN OR BX

Printed circuit board terminals, 7.50 mm, Number of poles: 2, 180°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN, Clamping range, max. : 2.5 mm², Box

Product ID 2774760000
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Toebehoren 1 Verwante producten 11
Approvals General ordering data Dimensions and weights Environmental Product Compliance System parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
Printed circuit board terminals, 7.50 mm, Number of poles: 2, 180°, Solder pin length (l): 3.5 mm, tinned, orange, PUSH IN, Clamping range, max. : 2.5 mm², Box 
Order No.
2774760000 
Type
LMFS 7.50/02/180 3.5SN OR BX 
GTIN (EAN)
4064675039464 
Qty.
100 items
Product data
IEC: 1000 V / 24 A / 0.5 - 2.5 mm²
UL: 300 V / 20 A / AWG 24 - AWG 12 
Packaging
Box 

Dimensions and weights

Depth
14.8 mm
Depth (inches)
0,583 inch
Height
18.7 mm
Height (inches)
0,736 inch
Height of lowest version
15.2 mm
Width
15.2 mm
Width (inches)
0,598 inch
Net weight
3.268 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System parameters

Product family
OMNIMATE Signal - series LMF 
Wire connection method
PUSH IN 
Mounting onto the PCB
THT solder connection 
Conductor outlet direction
180° 
Pitch in mm (P)
7.5 mm
Pitch in inches (P)
0.295 "
Number of poles
2 
Pin series quantity
1 
Number of rows
1 
Длина штифта для припайки (l)
3.5 mm
Solder pin dimensions
0.6 x 0.8 mm 
Solder eyelet hole diameter (D)
1.1 mm
Solder eyelet hole diameter tolerance (D)
+ 0,1 mm 
Number of solder pins per pole
2 
Skruvmejselklinga
0.6 x 3.5 
Screwdriver blade standard
DIN 5264 
Stripping length
10 mm
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Protection degree
IP20 

Material data

Matériau isolant
Wemid (PA) 
Couleur
orange 
Colour of operational elements
black 
Colour chart (similar)
RAL 2000 
Kúszóútképzési összehasonlítási szám (CTI)
≥ 600 
UL 94 flammability rating
V-0 
Contact material
Cu-alloy 
Superficie de contacto
tinned 
Coating
4-6 μm SN 
Tinning type
matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

Clamping range, min.
0.12 mm²
Clamping range, max.
2.5 mm²
Wire connection cross section AWG, min.
AWG 24 
Wire connection cross section AWG, max.
AWG 12 
단선, 최소 H05(07) V-U
0.5 mm²
Solid, max. H05(07) V-U
2.5 mm²
souple, min. H05(07) V-K
0.25 mm²
souple, max. H05(07) V-K
2.5 mm²
w. plastic collar ferrule, DIN 46228 pt 4, min.
0.25 mm²
avec embout isolé DIN 46 228/4, max.
2.5 mm²
avec embout, DIN 46228 pt 1, min.
0.25 mm²
w. wire end ferrule, DIN 46228 pt 1, max.
2.5 mm²
Текст ссылки
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
IEC 60947-7-4 
Courant nominal, nombre de pôles min. (Tu = 20 °C)
24 A
Courant nominal, nombre de pôles max. (Tu = 20 °C)
20 A
Rated current, min. number of poles (Tu=40°C)
23 A
Prąd znamionowy, maks. liczba biegunów (Tu=40°C)
18 A
Tension de choc nominale pour classe de surtension/Degré de pollution II/2
1,000 V
Tension de choc nominale pour classe de surtension/Degré de pollution III/2
600 V
Tension de choc nominale pour classe de surtension/Degré de pollution III/3
500 V
Tension de choc nominale pour classe de surtension/Degré de pollution II/2
6 kV
Tension de choc nominale pour classe de surtension/Degré de pollution III/2
6 kV
Tension de choc nominale pour classe de surtension/Degré de pollution III/3
6 kV
Short-time withstand current resistance
3 x 1s with 120 A 

Rated data acc. to CSA

Rated voltage (Use group B / CSA)
300 V
Rated voltage (Use group D / CSA)
300 V
Rated current (Use group B / CSA)
20 A
Rated current (Use group D / CSA)
10 A
와이어 단면적, AWG, 최소
AWG 24 
Wire cross-section, AWG, max.
AWG 12 

Rated data acc. to UL 1059

Napięcie znamionowe (grupa użytkowa B / UL 1059)
300 V
Rated voltage (Use group D / UL 1059)
300 V
Rated current (Use group B / UL 1059)
20 A
Rated current (Use group D / UL 1059)
10 A
Wire cross-section, AWG, min.
AWG 24 
Wire cross-section, AWG, max.
AWG 12 

Packing

Packaging
Box 
VPE length
338 mm
VPE width
130 mm
VPE height
27 mm

Type tests

Test: Durability of markings
  • Standard:
    IEC 61984 section 6.2 and 7.3.2 / 10.11
  • Test:
    mark of origin, type identification, approval marking UL, approval marking CSA, durability
  • Evaluation:
    available
Test: Clampable cross section
  • Standard:
    IEC 60947-7-4 sections 7.1.2 and 9.3.2 / 01.19
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.2 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.2 mm²
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
    • Type of conductor and conductor cross-section:
      AWG 12/7
    • Type of conductor and conductor cross-section:
      AWG 24/11
  • Evaluation:
    passed
Test for damage to and accidental loosening of conductors
  • Standard:
    IEC 60999-1 section 9.4 / 11.99
  • Requirement:
    0.2 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.2 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.2 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/11
  • Evaluation:
    passed
  • Requirement:
    0.7 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
  • Evaluation:
    passed
  • Requirement:
    0,9 kg
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 12/7
Test vytažení
  • Standard:
    IEC 60999-1 section 9.5 / 11.99
  • Requirement:
    ≥10 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 0.2 mm²
    • Type of conductor and conductor cross-section:
      stranded 0.2 mm²
    • Type of conductor and conductor cross-section:
      AWG 24/11
  • Evaluation:
    passed
  • Requirement:
    ≥50 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      solid 2.5 mm²
  • Evaluation:
    passed
  • Requirement:
    ≥ 60 N
  • Conductor type:
    • Type of conductor and conductor cross-section:
      AWG 12/7

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Additional variants on request
  • Rated current related to rated cross-section & min. No. of poles.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • P on drawing = pitch
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • The test point can only be used as potential-pickup point.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002643 
ETIM 9.0
EC002643 
ETIM 10.0
EC002643 
ECLASS 14.0
27-46-01-01 
ECLASS 15.0
27-46-01-01