PRO CP 20W 12V 1.6A

PRO CP 20W 12V 1.6A

Power supply, switch-mode power supply unit, 12 V

Product ID 3026100000
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 1 Verwante producten 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input Output General data Insulation coordination Electrical safety (applied standards) Connection data (input) Connection data (output) Signalling Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Power supply, switch-mode power supply unit, 12 V 
Order No.
3026100000 
Type
PRO CP 20W 12V 1.6A 
GTIN (EAN)
4099986953581 
Qty.
1 items

Dimensions and weights

Depth
29,5 mm
Depth (inches)
1,161 inch
Height
83 mm
Height (inches)
3,268 inch
Width
26,5 mm
Width (inches)
1,043 inch
Net weight
79 g

Temperatures

Storage temperature
-40 °C...90 °C 
Humidity at storage temperature
95 %, no condensation 
Operating temperature
-35 °C...50 °C 
Humidity at operating temperature
20 to 90% RH 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
c40c4197-e4ff-4c59-8a6f-82632592ebb9 

Input

AC input voltage range
85 … 305 V AC 
Anlaufzeit, max.
150 ms
Connection system
PUSH IN with actuator 
Frequency range AC
47...63 Hz 
Input current
450 mA 
Input fuse
2 A time-lag fuse (internal) 
Inrush current (typ.)
40 A
Jmenovitá spotřeba energie
22,99 VA
Load Regulation (typ.)
2 %
Rated input voltage
100…277 V AC 
Start-up current
  • Cold start temperature:
    25 °C
  • Input voltage:
    100 V
  • Voltage type:
    AC
  • Start-up current, max.:
    20 A
  • Cold start temperature:
    25 °C
  • Input voltage:
    230 V
  • Voltage type:
    AC
  • Start-up current, max.:
    40 A
  • Cold start temperature:
    25 °C
  • Input voltage:
    277 V
  • Voltage type:
    AC
  • Start-up current, max.:
    50 A
Špičkový proud
  • Input voltage:
    100 V
  • Voltage type:
    AC
  • Inrush current integral:
    0,15 A²s
  • Input voltage:
    230 V
  • Voltage type:
    AC
  • Inrush current integral:
    0,3 A²s
  • Input voltage:
    277 V
  • Voltage type:
    AC
  • Inrush current integral:
    0,35 A²s

Output

Carico capacitivo
6.000 µF 
Kimenő feszültség, min.
11,64 V
Kimenő áram, max.
1.667 mA
Max. residual ripple
120 mVss 
Potencia de salida
20 W
Protection de surcharge
120 … 180 %, switch off mode 
Tempo di ponticellamento caduta di rete
  • Mains failure bridge-over time, min.:
    8 ms
  • Input voltage type:
    AC
  • Input voltage:
    100 V
  • Output current:
    1.667 mA
  • Output voltage:
    12 V
  • Mains failure bridge-over time, min.:
    30 ms
  • Input voltage type:
    AC
  • Input voltage:
    230 V
  • Output current:
    1.667 mA
  • Output voltage:
    12 V
  • Mains failure bridge-over time, min.:
    50 ms
  • Input voltage type:
    AC
  • Input voltage:
    277 V
  • Output current:
    1.667 mA
  • Output voltage:
    12 V
Tension de sortie nominale
12 V DC ± 3 % 
Tension de sortie, max.
12,36 V
부하 조절 (보통)
2 %

General data

Building height
83 mm
Building Width
26,5 mm
Degree of efficiency (typ.)
87 %
Mounting position, installation notice
Horizontal on DIN rail TS 35, top and bottom 50 mm clearance for free air flow, 10 mm clearance to neighbouring subassemblies. 
On TS 35 mounting rail, 50 mm clearance above and below for free air supply. 
MTBF
  • According to Standard:
    MLT-HDBK-217F
  • Operating time (hours), min.:
    1.000.000 h
  • Ambient temperature:
    25 °C
  • Input voltage:
    230 V
  • Output power:
    20 W
  • Duty cycle:
    100 %
Power loss, idling
100 mW
Protection degree
IP30 
Short-circuit protection
Yes 
Standards
EN 60335-1 
Surge voltage category
III 

Insulation coordination

Humidity at storage temperature
95 %, no condensation 
Protection class
II 
Surge voltage category
III 
Tensión de aislamiento entrada /salida
4 kV

Electrical safety (applied standards)

Transformatory ochronne do zasilaczy impulsowych
According to EN 61558-2-16 
안전 초저전압
SELV according to EN 62368-1 

Connection data (input)

Conductor cross-section, AWG/kcmil , max.
12 AWG
Conductor cross-section, AWG/kcmil , min.
26 AWG
Conductor cross-section, flexible , min.
0,2 mm²
Conductor cross-section, rigid , max.
2,5 mm²
Conductor cross-section, rigid , min.
0,2 mm²
Connection system
PUSH IN with actuator 
Number of terminals
2 (L,N) 
Stripping length (input)
10 mm
Wire connection cross section, flexible (input), max.
2,5 mm²

Connection data (output)

Ledardiameter, en-/flertrådig , max.
1,5 mm²
Ledardiameter, en-/flertrådig , min.
0,2 mm²
Ledardiameter, flexibel , max.
1,5 mm²
Ledardiameter, flexibel , min.
0,14 mm²
Liczba zacisków
2 (+ / -) 
Stripping length (output)
10 mm
Сечение подключаемого провода, AWG/кило(кр. мил) , макс.
14 AWG
Сечение подключаемого провода, AWG/кило(кр. мил) , мин.
28 AWG

Signalling

LED green
Operating voltage OK 

Classifications

ETIM 8.0
EC002540 
ETIM 9.0
EC002540 
ETIM 10.0
EC002540 
ECLASS 14.0
27-04-07-01 
ECLASS 15.0
27-04-07-01