RCI42424FG
RIDERSERIES FG, Relay with positively driven contacts, Number of contacts: 2, CO contacts forcibily guided (EN 61810-3 type B) AgCuNi, Rated control voltage: 24 V DC, Continuous current: 6 A, Plug-in connection, Test button available: No
Eigenschappen
| Version | RIDERSERIES FG, Relay with positively driven contacts, Number of contacts: 2, CO contacts forcibily guided (EN 61810-3 type B) AgCuNi, Rated control voltage: 24 V DC, Continuous current: 6 A, Plug-in connection, Test button available: No |
| Order No. | 1218380000 |
| Type | RCI42424FG |
| GTIN (EAN) | 4050118001891 |
| Qty. | 12 items |
| Depth | 25,6 mm |
| Depth (inches) | 1,008 inch |
| Height | 30,2 mm |
| Height (inches) | 1,189 inch |
| Width | 12,7 mm |
| Width (inches) | 0,5 inch |
| Net weight | 17,97 g |
| Storage temperature | -40 °C...85 °C |
| Operating temperature | -40 °C...70 °C |
| Humidity | 40 °C / 95 % rel. humidity, no condensation |
| RoHS Compliance Status | Compliant without exemption |
| REACH SVHC | No SVHC above 0.1 wt% |
| Rated control voltage | 24 V DC |
| Rated current DC | 29.2 mA |
| Power rating | 700 mW |
| Coil resistance | 720 Ω ± 10 % |
| Status indicator | No |
| Rated switching voltage | 250 V AC |
| Continuous current | 6 A |
| Max. switching frequency at rated load | 0,1 Hz |
| Min. switching power |
1 mA @ 24 V
10 mA @ 10 V 100 mA @ 5 V |
| Inrush current | 15 A / 20 ms |
| AC switching capacity (resistive), max. | 1500 VA |
| DC switching capacity (resistive), max. | 144 W @ 24 V |
| Switch-on delay | ≤ 12 ms |
| Switch-off delay | ≤ 6 ms |
| Contact type | 2 CO contacts forcibily guided (EN 61810-3 type B) (AgCuNi) |
| Mechanical service life | > 50 x 106 switching cycles |
| Test button available | No |
| Mechanical switch position indicator | No |
| Colour | Transparent |
| Rated voltage | 250 |
| Pollution severity | 2 |
| Surge voltage category | III |
| Clearance and creepage distances for control side - load side | ≥ 10 mm |
| Dielectric strength for control side - load side | 5 kVeff / 1min |
| Dielectric strength of neighbouring contacts | 4 kVeff / 1 min |
| Dielectric strength of open contact | 1.5 kVeff /1 min. |
| Protection degree | IP20 |
| Standards | DIN EN 50205 |
| Wire connection method | Plug-in connection |
| Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_49169) |
| Eplan Data Portal | [Eplan data](https://dataportal.eplan.com/part-details/WEI.1218380000) |
| CADENAS eCATALOG | [CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1218380000) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC001437 |
| ETIM 7.0 | EC001437 |
| ETIM 8.0 | EC001437 |
| ETIM 9.0 | EC001437 |
| ECLASS 9.0 | 27-37-16-01 |
| ECLASS 9.1 | 27-37-16-01 |
| ECLASS 10.0 | 27-37-16-01 |
| ECLASS 11.0 | 27-37-16-01 |
| ECLASS 12.0 | 27-37-16-01 |
| ECLASS 13.0 | 27-37-16-01 |
| ECLASS 14.0 | 27-37-16-01 |
| ROHS | Conform |
Toebehoren
-
-
-
Product ID:8783930000VPE:10 items
RIDERSERIES FG, Relay socket, Number of contacts: 2, CO contact, Tension-clamp connection
-
Product ID:8690830000VPE:10 items
RIDERSERIES FG, Relay socket, Number of contacts: 2, CO contact, Screw connection
-
Product ID:8713720000VPE:10 items
RIDERSERIES FG, LED module with freewheel diode, Rated control voltage: 6…24 V DC, Plug-in connection
Contradelen
-
Product ID:8690830000VPE:10 items
RIDERSERIES FG, Relay socket, Number of contacts: 2, CO contact, Screw connection
-
Product ID:8783930000VPE:10 items
RIDERSERIES FG, Relay socket, Number of contacts: 2, CO contact, Tension-clamp connection
Afzonderlijke onderdelen van
-
Product ID:1218410000VPE:10 items
RIDERSERIES FG, Relay module with positively driven contacts, Number of contacts: 2, CO contacts forcibily guided (EN 61810-3 type B) AgCuNi, Rated control voltage: 24 V DC ±10 %, Continuous current: 6 A, Screw connection, Test button available: No
-
Product ID:1218390000VPE:10 items
RIDERSERIES FG, Relay module with positively driven contacts, Number of contacts: 2, CO contacts forcibily guided (EN 61810-3 type B) AgCuNi, Rated control voltage: 24 V DC ±10 %, Continuous current: 6 A, Tension-clamp connection, Test button available: No