Eigenschappen
| Version | SAFESERIES, Safety relay,24 V DC ±15 %, 24 VDC +15% / -10% during auto-start, 35 mA, 5, SIL 3, DIN EN 61508, EN ISO 13849-1 (PLe) |
| Order No. | 1319280000 |
| Type | SCS 24VDC P2SIL3ES |
| GTIN (EAN) | 4050118125078 |
| Qty. | 1 items |
| Depth | 114,1 mm |
| Depth (inches) | 4,492 inch |
| Height | 119,6 mm |
| Height (inches) | 4,709 inch |
| Width | 22,5 mm |
| Width (inches) | 0,886 inch |
| Net weight | 292 g |
| Storage temperature | -40 °C...85 °C |
| Operating temperature | -25 °C...55 °C |
| Humidity | 40 °C / 93 % rel. humidity, no condensation |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 7a, 7cI |
| REACH SVHC |
Lead 7439-92-1
6,6'-di-tert-butyl-2,2'-methylenedi-p-cresol 119-47-1 |
| SCIP | 332bc555-bc84-431d-ba7a-563be05e80bd |
| Connection designation |
A1
A2 C1 C2 |
| Rated control voltage |
24 V DC ±15 %
24 VDC +15% / -10% during auto-start |
| Current consumption |
55 mA (release circuit enabled)
6 mA (release circuit not enabled) |
| Guaranteed current consumption at 24 V DC -10% | 35 mA |
| Inrush current |
750 mA / 5 ms (for starting with S33/S34 (start circuit))
2 A / 20 ms (for starting with A1/A2 (autostart)) |
| Response time |
with bridge via C1/C2: typ. 50 ms
without bridge via C1/C2: typ. 20 ms |
| Status display |
LED green: supply
Yellow LED: signal |
| Protective circuit |
Reverse polarity protection
Free-wheeling diode |
| Short-circuit detection | Yes, max. 4 s up to disconnection (thermistor) |
| Anschlussbezeichnung |
S33
S34 S35 |
| Operating voltage | 22 V DC, from internal power supply |
| Function |
falling edge (button via S33/S34)
rising edge (permanent bridge via S33/S35) |
| Connection designation |
S11
S12 S21 S22 |
| Input | 2, each externally bridgeable |
| Operating voltage | 22 V DC, from internal power supply |
| Connection designation |
13
14 23 24 |
| Contact design | 2 NO positively-driven (EN 50205 type B) |
| Contact base material | AgSnO |
| Switching voltage AC, max. | 250 V |
| Max. permissible switching current | 5 A |
| Max. switching current, external fuse | 5 A |
| Max. switching capacity | 1250 VA |
| External back-up fuse | 5 A time-lag |
| Turn-on time |
55 ms (C1/C2 bridged, switched via A1/A2)
30 ms (opening/closing of monitoring circuit) |
| Turn-off time |
55 ms (C1/C2 bridged, switched via A1/A2)
15 ms (opening/closing of monitoring circuit) |
| Min. switching capacity | 10 mA @ 12 V |
| Connection designation |
31
32 |
| Contact design | 1 NC positively-driven (EN 50205 type B) |
| Switching voltage AC, max. | 250 V |
| Max. switching current. | 1 A |
| Device type | A |
| Tproof | 12 a |
| Hardware fault tolerance (HFT) | 1 |
| Safety category | SIL 3 |
| Safety standard |
DIN EN 61508
EN ISO 13849-1 (PLe) |
| Operating altitude |
≤ 2000 m
above sea level |
| Rail | TS 35 |
| Colour |
black
yellow |
| Rated voltage | 300 V |
| Pollution severity | 2 |
| Surge voltage category | III |
| Clearance and creepage distances for control side - load side | ≥ 5.5 mm |
| Dielectric strength for control side - load side | 4 kVeff / 1 min |
| Dielectric strength to mounting rail | 4 kVeff / 1 Min. |
| Impulse withstand voltage | 6 kV (1.2/50 µs) |
| Protection degree | IP20 |
| Standards |
EN 61000
EN 61326-3-2 EN ISO 13849-1 (PLe) |
| Equipment for furnaces | EN 50156 |
| Wire connection method | Screw connection |
| Stripping length, rated connection | 8 mm |
| Tightening torque, min. | 0,4 Nm |
| Tightening torque, max. | 0,6 Nm |
| Clamping range, rated connection | 1,5 mm² |
| Clamping range, min. | 0,13 mm² |
| Clamping range, max. | 2,5 mm² |
| Wire connection cross section AWG, min. | AWG 26 |
| Wire connection cross section AWG, max. | AWG 12 |
| Wire cross-section, solid, min. | 0,2 mm² |
| Wire cross-section, solid, max. | 2,5 mm² |
| Wire connection cross section, finely stranded, min. | 0,2 mm² |
| Wire connection cross section, finely stranded, max. | 2,5 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min. | 0,2 mm² |
| Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max. | 2,5 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), min. | 0,2 mm² |
| Conductor cross-section, flexible, AEH (DIN 46228-1), max. | 2,5 mm² |
| Blade size | size PH0 |
| Approval/Certificate/Document of Conformity |
[TUV Safety Approved certificate](https://mdcop.weidmueller.com/mediadelivery/asset/900_38306)
[EG-Baumusterprüfbescheinigung / EC type-examination certificate](https://mdcop.weidmueller.com/mediadelivery/asset/900_38308) [EU Konformitätserklärung / EU Declaration of Conformity](https://mdcop.weidmueller.com/mediadelivery/asset/900_38738) |
| Engineering Data | [CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_54116) |
| Eplan Data Portal | [Eplan data](https://dataportal.eplan.com/part-details/WEI.1319280000) |
| CADENAS eCATALOG | [CAX data](https://weidmueller-embedded.partcommunity.com?catalog=weidmueller_qs&part=1319280000) |
| Software | [Library and function block -- SISTEMA library 2.0](https://mdcop.weidmueller.com/mediadelivery/asset/900_89074) |
| User Documentation |
[Beipackzettel / Package Insert - multilingual](https://mdcop.weidmueller.com/mediadelivery/asset/900_39328)
[Sicherheitshandbuch – Deutsch](https://mdcop.weidmueller.com/mediadelivery/asset/900_67205) [Safety manual – English](https://mdcop.weidmueller.com/mediadelivery/asset/900_67206) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC001449 |
| ETIM 7.0 | EC001449 |
| ETIM 8.0 | EC001449 |
| ETIM 9.0 | EC001449 |
| ECLASS 9.0 | 27-37-18-19 |
| ECLASS 9.1 | 27-37-18-19 |
| ECLASS 10.0 | 27-37-18-19 |
| ECLASS 11.0 | 27-37-18-19 |
| ECLASS 12.0 | 27-37-18-19 |
| ECLASS 13.0 | 27-37-18-19 |
| ECLASS 14.0 | 27-37-18-19 |
| Approvals |   |
| ROHS | Conform |