VPU AC I 1 N-PE 305/100 S
VPU AC I 1 N-PE 305/100 S
VPU AC I 1 N-PE 305/100 S
Electric symbol
Schematic circuit diagram

VPU AC I 1 N-PE 305/100 S

Surge voltage arrester, Low voltage, Surge protection, Single-phase, TN, TT nur für N-PE

Product ID 2726800000
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 4 Onderdelen 2 Verwante producten 3
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319263/-S800/-T1z1mm-S80)  
ROHS
Conform  

General ordering data

Version
Surge voltage arrester, Low voltage, Surge protection, Single-phase, TN, TT nur für N-PE  
Order No.
2726800000  
Type
VPU AC I 1 N-PE 305/100 S  
GTIN (EAN)
4050118802481  
Qty.
1  items

Dimensions and weights

Depth
91  mm
Depth (inches)
3,583  inch
Height
90  mm
Height (inches)
3,543  inch
Width
18  mm
Width (inches)
0,709  inch
Net weight
197  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-40 °C...85 °C  
Humidity
5 - 95% rel. humidity  

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

General data

Colour
black  
blue  
Design
Installation housing; 1TE  
Insta IP 20  
Operating altitude
≤ 2000 m  
Optical function display
green = OK; red = arrester is defective - replace  
Protection degree
IP20  
IP20 in installed state  
Rail
TS 35  
Segment
Power distribution  
UL 94 flammability rating
V-0  
Version
Surge protection  

Insulation coordination acc. to EN 50178

Pollution severity
2  
Surge voltage category
IV  

Rated data IEC / EN

Discharge current Imax (8/20µs) N-PE
150 kA  
Discharge current In (8/20µs) N-PE
100 kA  
Energy coordination (≤10 m)
Type I  
Type II  
Type III  
Follow-on current extinguishing capability Ifi
Not available due for technical reasons  
Frequency range, max.
60  Hz
Frequency range, min.
50  Hz
Fuse
Not required  
Integrated back-up fuse
No  
Leakage current at Un
1  µA
Lightning test current, Iimp (10/350 µs) (N-PE)
100 kA  
Low voltage network
Single-phase  
TN  
TT nur für N-PE  
Mains voltage
230 V / 400 V  
Max. continuous voltage, Uc (N-PE)
305  V
Number of poles
1  
Protection level Up at IN (N-PE)
≤ 1.5 kV  
Rated voltage (AC)
230  V
Requirements category acc. to IEC 61643-11
Type I  
Type II  
Requirements class, acc. to EN 61643-11
T1  
T2  
Response time
≤ 100 ns  
Short-circuit current rating ISCCR
0,1  kA
Signalling contact
No  
Standards
IEC 61643-11  
EN 61643-11  
UL 1449  
Temporary surge voltage (over-voltage) - TOV
1.200  V
Voltage type
AC  

Connection data

Stripping length
18  mm
Wire connection method
Screw connection  
Type of connection
Screw connection  
Stripping length, rated connection
18  mm
Tightening torque, min.
3  Nm
Tightening torque, max.
4,5  Nm
Clamping range, rated connection
16  mm²
Clamping range, min.
1,5  mm²
Clamping range, max.
35  mm²
Wire cross-section, solid, min.
2,5  mm²
Wire cross-section, solid, max.
35  mm²
Wire connection cross section, finely stranded, min.
1,5  mm²
Wire connection cross section, finely stranded, max.
35  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
2,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
35  mm²
Connection cross-section, stranded, min.
1,5  mm²
Connection cross-section, stranded, max.
35  mm²

Electrical data

Voltage type
AC  

General data

Number of poles
1  
Protection degree
IP20  
IP20 in installed state  
Colour
black  
blue  

Guarantee

Time interval
5 years  

Classifications

ETIM 7.0
EC000381  
ETIM 8.0
EC000381  
ETIM 9.0
EC000381  
ETIM 10.0
EC000381  
ECLASS 12.0
27-17-12-04  
ECLASS 13.0
27-17-12-04  
ECLASS 14.0
27-17-12-04  
ECLASS 15.0
27-17-12-04