VPU III R 230V/6KV AC
VPU III R 230V/6KV AC
Electric symbol
Schematic circuit diagram

VPU III R 230V/6KV AC

Surge voltage arrester, Low voltage, with remote contact, Single-phase

Item No. 1351650000
Open in Configurator
Download data sheet Engineering Support Product Downloads
Accessories 1 Related products 5
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Данные соединения, удаленная индикация Allmänna data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Classifications Tender specification sheets

Approvals

Zulassungen
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/f2570d3e-3e62-4056-9c95-fe925a1a2b86/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, with remote contact, Single-phase 
Best.-Nr.
1351650000 
Type
VPU III R 230V/6KV AC 
GTIN (EAN)
4050118158496 
Qty.
1 items

Dimensions and weights

Depth
71,5 mm
Depth (inches)
2,815 inch
Height
102 mm
Height (inches)
4,016 inch
Width
18 mm
Width (inches)
0,709 inch
Net weight
77 g

Temperatures

Lagertemperatur
-40 °C...70 °C 
Betriebstemperatur
-40 °C...70 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS-Konformitätsstatus
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Данные соединения, удаленная индикация

Connection type
Screw connection 
Cross-section for connected wire, solid core, max.
1,5 mm²
Cross-section for connected wire, solid core, min.
0,2 mm²
Max. torque
0,5 Nm
Stripping length
5 mm

Allmänna data

Colour
orange 
Design
Installation housing; 1TE 
Insta IP 20 
Mounting rail
TS 35 
Optical function display
Green LED = OK 
Red LED = arrester is defective 
replace 
Protection degree
IP20 
Segment
Power distribution 
UL 94 flammability rating
V-0 
Version
with remote contact 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
II 

Rated data IEC / EN

Combined pulse UOC
6 kV
Discharge current (type III)
3 kA
Energy coordination (≤10 m)
Type II 
Type III 
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse protection
16 A 
Integrated back-up fuse
No 
Leakage current at Un
30 µA
Low voltage network
Single-phase 
Mains frequency at 250 Vmax
50...60Hz 
Max. continuous voltage, Uc (AC)
300 V 
Number of poles
2 
Protection level Up at IN (L/N-PE)
≤ 1.8 kV 
Proud I vodičem PEPE
30 µA
Rated current IN
16 A
Rated voltage (AC)
230 V
Requirements category acc. to IEC 61643-11
Type III 
Requirements class, acc. to EN 61643-11
T3 
Response time / fallback time
≤ 100 ns 
Short-circuit current rating ISCCR
1,5 kA
Signalling contact
250 V 10 A 1 NC 
Standards
IEC 61643-11 
EN 61643-11 
Temporary surge voltage (over-voltage) - TOV
438 V
Voltage type
AC 

Connection data

Stripping length
7 mm
Type of connection
Screw connection 
Longitud de desaislado, conexión nominal
7 mm
Couple de serrage, min.
0,4 Nm
Tightening torque, max.
0,5 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire cross-section, solid, min.
0,13 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2,5 mm²
Connection cross-section, stranded, min.
0,5 mm²
Connection cross-section, stranded, max.
2,5 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
2 
Protection degree
IP20 
Colour
orange 

Guarantee

Time interval
5 years 

Classifications

ETIM 8.0
EC000942 
ETIM 9.0
EC000942 
ETIM 10.0
EC000942 
ECLASS 14.0
27-17-12-03 
ECLASS 15.0
27-17-12-03 

Tender specification sheets

Long specification
Surge protection according to the requirements of Class III in accordance with IEC 61643-11, EN61643-11:2013. The arrestor serves as surge protection and is used in applications in accordance with IEC 61643-12. The arrestor is installed in the vicinity of the equipment that needs protection in a standard installation/distributor housing. The VPU III R 230 V is earthed between the phase and the neutral conductor. With thermal separation device on the varistor. If there is no longer any protection, the colour of the LEDs changes from green to red. The functional state is also displayed by a voltage-free signalling contact (NC contact). Rated voltage: 230 VAC In/max (8/20 µs): 3 kA protection level < 1.8 kV load current Il: 16 A telecommunication output: contact NC: 250 V/0.5 A 48 VDC/0.1 A Type: Weidmüller VPU III R 230 V Order No. 1351650000 or equivalent 
Short specification
Class III arrester with Uoc: 6 kV suitable for 230 V AC mains systems. Protection level < 1.8 kV. With remote alert Type: Weidmüller VPU III R 230 V/6 kV Order no. 1351650000 or equivalent