VPU ZPA S I 3+1 R 300/7,5
Product image
Similar to illustration
VPU ZPA S I 3+1 R 300/7,5
Electric symbol
Circuit diagram

VPU ZPA S I 3+1 R 300/7,5

Surge voltage arrester, Low voltage, Leakage-current-free

Product ID 2830970000
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 4 Verwante producten 6
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert General data Rated data IEC / EN Connection data Electrical data General data Guarantee Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319263/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, Leakage-current-free 
Order No.
2830970000 
Type
VPU ZPA S I 3+1 R 300/7,5 
GTIN (EAN)
4064675390176 
Qty.
1 items

Dimensions and weights

Depth
102 mm
Depth (inches)
4,016 inch
Width
36 mm
Width (inches)
1,417 inch
Net weight
638 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
…85 °C 
Operating temperature
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Connection type
PUSH IN 
Cross-section for connected wire, solid core, max.
1,5 mm²
Cross-section for connected wire, solid core, min.
0,25 mm²
Max. torque
0,4 Nm

General data

auxiliary contact
No 
Colour
grey 
Mounting rail
Busbar 
Operating altitude
≤ 4000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 
Segment
Power distribution 
Version
Leakage-current-free 

Rated data IEC / EN

Combined pulse UOC
6 kV
Discharge current Imax (8/20µs) N-PE
100 kA 
Discharge current In (8/20µs) N-PE
80 kA 
Energy coordination (≤10 m)
Type I 
Type II 
Type III 
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse protection
No Fuse neccessary ≤160 A gG 
Integrated back-up fuse
No 
Leakage current at Un
5 µA
Lightning test current Iimp (10/350 µs) (L-PE)
7,5 kA
Lightning test current, Iimp (10/350 µs) (N-PE)
30 kA 
Mains voltage
230 V / 400 V 
Max. continuous voltage, Uc (N-PE)
305 V
Number of poles
4 
PE conductor current IPE
5 µA
Protection level Up at IN (L/N-PE)
≤ 1.5 kV 
Rated voltage (AC)
240 V
Requirements category acc. to IEC 61643-11
Type I 
Type II 
Type III 
Requirements class, acc. to EN 61643-11
T1 
T2 
T3 
Response time / fallback time
≤ 100 ns 
Short-circuit current rating ISCCR
25 kA
Signalling contact
250 V 1A 1CO 
SPD type
T1 
T2 
T3 
Voltage type
AC 

Connection data

Stripping length
18 mm
Wire connection method
Screw connection 
Type of connection
Screw connection 
Tightening torque, max.
4,5 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
4 mm²
35 mm²
Wire cross-section, solid, min.
16 mm²
Wire cross-section, solid, max.
35 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
16 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
25 mm²
Connection cross-section, stranded, min.
16 mm²
Connection cross-section, stranded, max.
35 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
4 
Protection degree
IP20 
Colour
grey 

Guarantee

Time interval
5 years 

Important note

Product information

Only applicable to IT power systems where the earth on the distribution transformer is interconnected with the earth on the consumer side (RE=RA in Figure 44.A1 of IEC 60634-4-44:2018). 

Classifications

ETIM 8.0
EC001457 
ETIM 9.0
EC001457 
ETIM 10.0
EC001457 
ECLASS 14.0
27-17-12-04 
ECLASS 15.0
27-17-12-04