text.skipToContent text.skipToNavigation

Gegevensblad downloaden

WGKV 16 VP GY BX SO

OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 16 mm², Wemid (PA), Direct mounting, Feed-through (bushing)

Product ID 2440760000

Eigenschappen

General ordering data

Version	OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 16 mm², Wemid (PA), Direct mounting, Feed-through (bushing)
Order No.	2440760000
Type	WGKV 16 VP GY BX SO
GTIN (EAN)	4050118468014
Qty.	50 items
Product data	IEC: 500 V / 76 A / 0.5 - 25 mm² UL: 600 V / 85 A / AWG 20 - AWG 4
Packaging	Box

Dimensions and weights

Height	39,7 mm
Height (inches)	1,563 inch
Height of lowest version	39,7 mm
Width	12 mm
Width (inches)	0,472 inch
Length	12 mm
Length (inches)	0,472 inch
Net weight	26,12 g

Environmental Product Compliance

RoHS Compliance Status	Compliant without exemption
REACH SVHC	No SVHC above 0.1 wt%

System parameters

Product family	OMNIMATE Power - series WGK
Wire connection method	Cable lug: ring cable / spade lug
Conductor outlet direction	90°/270°
Number of poles	1
Pin series quantity	1
Fitted by customer	No
Screwdriver blade	1.0 x 5.5
Tightening torque, min.	2 Nm
Tightening torque, max.	2,3 Nm
Clamping screw	M 5
Stripping length	16 mm
Touch-safe protection acc. to DIN VDE 0470	IP 20
Protection degree	IP20
Type of connection 1	Clamping yoke
Type of connection 2	Screw connection

Insulating material	Wemid (PA)
Colour	grey
Colour chart (similar)	RAL 7035
UL 94 flammability rating	V-0
Contact material	Cu-alloy
Contact surface	tinned
Storage temperature, min.	-40 °C
Storage temperature, max.	70 °C
Operating temperature, min.	-50 °C
Operating temperature, max.	120 °C
Temperature range, installation, min.	-25 °C
Temperature range, installation, max.	120 °C

Conductors suitable for connection

Clamping range, min.	0,5 mm²
Clamping range, max.	25 mm²
Wire connection cross section AWG, min.	AWG 20
Wire connection cross section AWG, max.	AWG 4
Solid, min. H05(07) V-U	0,5 mm²
Solid, max. H05(07) V-U	16 mm²
Stranded, min. H07V-R	10 mm²
Stranded, max. H07V-R	25 mm²
Flexible, min. H05(07) V-K	0,5 mm²
Flexible, max. H05(07) V-K	16 mm²
w. wire end ferrule, DIN 46228 pt 1, min.	0,5 mm²
w. wire end ferrule, DIN 46228 pt 1, max.	16 mm²
Reference text	Length of ferrules is to be chosen depending on the product and the rated voltage. The outside diameter of the plastic collar should not be larger than the pitch (P)

Rated data acc. to IEC

tested acc. to standard	IEC 60664-1
Rated current, min. number of poles (Tu=20°C)	76 A
Rated current, max. number of poles (Tu=20°C)	76 A
Rated voltage for surge voltage class / pollution degree III/3	500 V
Rated impulse voltage for surge voltage class/ contamination degree III/3	6 kV

Rated data acc. to CSA

Rated voltage (Use group B / CSA)	600 V
Rated voltage (Use group C / CSA)	600 V
Rated voltage (Use group D / CSA)	300 V
Rated current (Use group B / CSA)	85 A
Rated current (Use group C / CSA)	85 A
Rated current (Use group D / CSA)	10 A
Wire cross-section, AWG, min.	AWG 20
Wire cross-section, AWG, max.	AWG 4

Rated data acc. to UL 1059

Institute (cURus)	CURUS
Certificate No. (cURus)	E60693
Rated voltage (Use group B / UL 1059)	600 V
Rated voltage (Use group C / UL 1059)	600 V
Rated voltage (Use group D / UL 1059)	300 V
Rated current (Use group B / UL 1059)	85 A
Rated current (Use group C / UL 1059)	85 A
Rated current (Use group D / UL 1059)	10 A
Wire cross-section, AWG, min.	AWG 20
Wire cross-section, AWG, max.	AWG 4
Reference to approval values	Specifications are maximum values, details - see approval certificate.

Packaging	Box
VPE length	370 mm
VPE width	125 mm
VPE height	40 mm

Notes

Clearance and creepage distances to other components must be devised in accordance with the relevant application standard. This can be achieved in the device by full encapsulation or by the use of additional spacer plates.

Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.

Colours: SW = black; GN/YL = green/yellow; GY = grey

Additional variants on request

WGK: Rated voltage plastic walls: 1 - 6 mm = 800 V; metal walls: 1 - 2.5 mm = 800 V; metal walls: 2.5 - 4 mm = 690 V; metal walls: 4 - 6 mm = 500 V

Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months

Approval/Certificate/Document of Conformity	[Declaration of the Manufacturer](https://mdcop.weidmueller.com/mediadelivery/asset/900_39474)
Engineering Data	[CAD data -- STEP](https://mdcop.weidmueller.com/mediadelivery/asset/900_50380)
Product Change Notification	[20220114 Change color for feedthrough terminals – WGK GY](https://mdcop.weidmueller.com/mediadelivery/asset/900_249891) [20220114 WGK GY - Farbänderung](https://mdcop.weidmueller.com/mediadelivery/asset/900_249892)
Catalogues	[Catalogues in PDF-format](LINK/Catalog.html)
Brochures	[FL DRIVES EN](http://download.weidmueller.com/asset/download/file/40061) [MB DEVICE MANUF. EN](http://download.weidmueller.com/asset/download/file/38257) [FL DRIVES DE](http://download.weidmueller.com/asset/download/file/40062) [FL_BASE_STATION_EN](http://download.weidmueller.com/asset/download/file/38194) [FL ELEVATOR EN](http://download.weidmueller.com/asset/download/file/38203) [FL POWER SUPPLY EN](http://download.weidmueller.com/asset/download/file/38213) [FL 72H SAMPLE SER EN](http://download.weidmueller.com/asset/download/file/38294) [PO OMNIMATE EN](http://download.weidmueller.com/asset/download/file/38132)

Classifications

ETIM 6.0	EC001283
ETIM 7.0	EC001283
ETIM 8.0	EC001283
ETIM 9.0	EC001283
ECLASS 9.0	27-14-11-34
ECLASS 9.1	27-14-11-34
ECLASS 10.0	27-14-11-34
ECLASS 11.0	27-14-11-34
ECLASS 12.0	27-14-11-34
ECLASS 13.0	27-14-11-34
ECLASS 14.0	27-14-11-34

Approvals	![CURUS](/picture/CURUS.gif)
ROHS	Conform
UL File Number Search	[UL Website](LINK/UL_search.html)
Certificate No. (cURus)	E60693

Toebehoren