Properties
| Version | FUJITSU NYP-24WK, Tension-clamp connection |
| Order No. | 8431000000 |
| Type | RS F40 32RS OUT LMZF |
| GTIN (EAN) | 4008190032753 |
| Qty. | 1 items |
| Depth | 73 mm |
| Depth (inches) | 2.874 inch |
| Height | 87 mm |
| Height (inches) | 3.425 inch |
| Width | 263 mm |
| Width (inches) | 10.354 inch |
| Net weight | 446.16 g |
| Storage temperature | -40...70 °C |
| Operating temperature | 0...55 °C |
| RoHS Compliance Status | Compliant with exemption |
| RoHS Exemption (if applicable/known) | 7a, 7cI |
| REACH SVHC | Lead 7439-92-1 |
| SCIP | 7b5ffb72-271d-4c73-8b09-bd0aaee3697a |
| LED status display per relay | green |
| Disconnector per relay | No |
| Fuse per relay | No |
| Switch | No |
| LED status of the supply voltage | yellow |
| Power supply fuse | No |
| Connection on control side | Plug-in connector in acc. with IEC60603-13 / DIN41651 |
| Number of poles (control side) | 40-pole |
| Mechanical service life | 3 x 107 switching cycles |
| Switch-on delay | < 5 ms |
| Switch-off delay | < 15 ms |
| Input voltage | 24 V DC ± 10% |
| Input current | 5 mA ± 15% |
| Power rating | 0.5 W |
| Min. switching current | 10 mA |
| Relay type | FUJITSU NYP-24WK |
| Type of output | Potential-free contact |
| Contact material | AgNi gold flashed |
| Max. AC continuous current | 3 A |
| AC peak current | 5 A |
| Minimum contact current | 0.0001 A |
| Minimum contact voltage | 0.1 V |
| According to | DIN EN 50178 |
| Rated input insulation voltage | < 50 V AC |
| Rated output insulation voltage | < 250 V AC |
| Overvoltage category input/input | II |
| Overvoltage category input/output | II |
| Overvoltage category output/output | II |
| Pollution severity level | 2 |
| Pulse voltage test (1,2/50μs) | 2 kV |
| Insulation test voltage AC | 4 kV |
| Clearance input/output | ≥ 7 mm |
| Clamping range, max. | 1.5 mm² |
| Clamping range, min. | 0.5 mm² |
| Flexible, max. H05(07) V-K | 1.5 mm² |
| Flexible, min. H05(07) V-K | 0.5 mm² |
| Max. wire cross-section, AWG | AWG 14 |
| Min. wire cross-section, AWG | AWG 26 |
| Solid, max. H05(07) V-U | 1.5 mm² |
| Solid, min. H05(07) V-U | 0.5 mm² |
| Stripping length | 7 mm |
| Type of connection | Tension-clamp connection |
| Type of connection | Tension-clamp connection |
| Clamping range, min. | 0.5 mm² |
| Clamping range, max. | 1.5 mm² |
| Solid, min. H05(07) V-U | 0.5 mm² |
| Solid, max. H05(07) V-U | 1.5 mm² |
| Flexible, min. H05(07) V-K | 0.5 mm² |
| Flexible, max. H05(07) V-K | 1.5 mm² |
| Flexible with sleeve, max. | 1.5 mm² |
| Wire cross-section, min. AWG | AWG 26 |
| Wire cross-section, max. AWG | AWG 14 |
| Stripping length | 7 mm |
| Approval/Certificate/Document of Conformity | [K154_11_98.pdf](https://mdcop.weidmueller.com/mediadelivery/asset/900_36189) |
| Catalogues | [Catalogues in PDF-format](LINK/Catalog.html) |
| ETIM 6.0 | EC002780 |
| ETIM 7.0 | EC002780 |
| ETIM 8.0 | EC002780 |
| ETIM 9.0 | EC002780 |
| ECLASS 9.0 | 27-14-11-52 |
| ECLASS 9.1 | 27-24-22-16 |
| ECLASS 10.0 | 27-14-11-52 |
| ECLASS 11.0 | 27-14-11-52 |
| ECLASS 12.0 | 27-14-11-52 |
| ECLASS 13.0 | 27-14-11-52 |
| ECLASS 14.0 | 27-14-11-52 |
| Approvals |  |
| ROHS | Conform |