HDC HP 550 M 50
HDC HP 550 M 50

HDC HP 550 M 50

HDC insert, Male, 3600 V, Crimp connection, Installation size: 550

№ продукта 1157800000
Загрузить спецификации Tekninen tuki Tuotelataukset
Аксессуары 5 Является принадлежностью 1 Связанные продукты 16
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Power contact Version Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
HDC insert, Male, 3600 V, Crimp connection, Installation size: 550 
Order No.
1157800000 
Type
HDC HP 550 M 50 
GTIN (EAN)
4032248945337 
Qty.
1 items

Dimensions and weights

Length
91 mm
Length (inches)
3,583 inch
Diameter
43 mm
Net weight
188 g

Temperatures

Limit temperature
-50 °C ... 120 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
6eabd5ae-2d6b-409e-8bdf-87c27ee10e40 

General data

Anschlussart
Crimp connection 
Baugröße
550 
BG
550 
Colour
black 
Conductor cross-section
50 mm²
Corrente nominale secondo DIN EN 61984 (temperatura ambiente=20°C)
200 A
Grado de polución
PD 2 (PD 3) 
Insulating material
PA GF 
Insulation resistance
1010 Ω 
Material básico
Copper alloy 
Plugging cycles
≥ 500 
Serie
HighPower 
Steckzyklen Ag
≥ 500 
Surface finish
Silver passivated 
Tension de choc nominale (DIN EN 61984)
15 kV
Tensión nominal (DIN EN 61984)
3.600 V
Type
Male 
UL 94 flammability rating
V-0 
Volume resistance
≤0.1 mΩ 

Power contact

Rated impulse voltage (DIN EN 61984), power contact
15 kV
Stripping length, performance contact
30 mm
Type of connection, power contact
Crimp connection 

Version

Basic material
Copper alloy 
BG
550 
Conductor cross-section, min.
50 mm²
Genomgångsmotstånd (6)
≤0.1 mΩ 
Ledardiameter, max.
50 mm²
Stripping length, rated connection
30 mm
Surface finish
Silver passivated 
Вид соединения
Crimp connection 
Типоразмер установки
550 

Important note

Product information
Depending on the intended operation, internally generated voltages can superimpose the working voltage and contain corresponding peaks. It is imperative to ensure that these peak voltages do not exceed the rated voltage. For applications outside of this specification, please contact us. The rated voltage of 3.6 kV must be reduced by 20% at operating temperatures above 100°C. 

Classifications

ETIM 8.0
EC000796 
ETIM 9.0
EC000796 
ETIM 10.0
EC000796 
ECLASS 14.0
27-44-02-04 
ECLASS 15.0
27-44-02-04