VPU III R 24V/4KV AC/DC
VPU III R 24V/4KV AC/DC
VPU III R 24V/4KV AC/DC
Electric symbol
Schematic circuit diagram

VPU III R 24V/4KV AC/DC

Surge voltage arrester, Low voltage, with remote contact, Single-phase

Tuotteen tunnus 1351580000
Avaa konfiguraattorissa
Lataa tietosivu Tekninen tuki Tuotelataukset
Lisävarusteet 1 Varaosat 1 Samankaltaiset tuotteet 5
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Connection data, remote alert General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Classifications Tender specification sheets

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/f2570d3e-3e62-4056-9c95-fe925a1a2b86/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, with remote contact, Single-phase 
Order No.
1351580000 
Type
VPU III R 24V/4KV AC/DC 
GTIN (EAN)
4050118158557 
Qty.
1 items

Dimensions and weights

Depth
71,5 mm
Depth (inches)
2,815 inch
Height
102 mm
Height (inches)
4,016 inch
Width
18 mm
Width (inches)
0,709 inch
Net weight
84 g

Temperatures

Storage temperature
-40 °C...70 °C 
Operating temperature
-40 °C...70 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Connection data, remote alert

Ledaranslutningsarea, entrådig, max.
1,5 mm²
Max. torque
0,5 Nm
Stripping length
5 mm
Вид соединения
Screw connection 
결선된 와이어 단면, 솔리드 코어, 최소
0,2 mm²

General data

Altitudine di esercizio
≤ 3000 m 
Forme
Installation housing; 1TE 
Insta IP 20 
Optical function display
Green LED = OK 
Red LED = arrester is defective 
replace 
Segmento
Power distribution 
Szín
orange 
Tartósín
TS 35 
UL 94 éghetőségi osztály
V-0 
Versión
with remote contact 
Védelmi osztály
IP20 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
II 

Rated data IEC / EN

Combined pulse UOC
4 kV
Discharge current (type III)
4 kA
Energy coordination (≤10 m)
Type II 
Type III 
Fuse protection
16 A 
Integrated back-up fuse
No 
Leakage current at Un
30 µA
Low voltage network
Single-phase 
Mains frequency at 250 Vmax
50...60Hz 
Max. continuous voltage, Uc (AC)
32 V 
Number of poles
2 
PE conductor current IPE
30 µA
Protection level Up at IN (L/N-PE)
≤ 0.9 kV 
Rated current IN
16 A
Rated voltage (AC)
24 V
Rated voltage (DC)
32 V 
Requirements category acc. to IEC 61643-11
Type III 
Requirements class, acc. to EN 61643-11
T3 
Response time / fallback time
≤ 100 ns 
Short-circuit current rating ISCCR
1,5 kA
Signalling contact
250 V 10 A 1 NC 
Standards
IEC 61643-11 
EN 61643-11 
Temporary surge voltage (over-voltage) - TOV
46 V
Voltage type
AC/DC 

Connection data

Stripping length
7 mm
Type of connection
Screw connection 
Stripping length, rated connection
7 mm
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,5 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire cross-section, solid, min.
0,13 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2,5 mm²
Connection cross-section, stranded, min.
0,5 mm²
Connection cross-section, stranded, max.
2,5 mm²

Electrical data

Spannungsart
AC/DC 

General data

Number of poles
2 
Protection degree
IP20 
Colour
orange 

Guarantee

Período
5 years 

Classifications

ETIM 8.0
EC000942 
ETIM 9.0
EC000942 
ETIM 10.0
EC000942 
ECLASS 14.0
27-17-12-03 
ECLASS 15.0
27-17-12-03 

Tender specification sheets

Long specification
Surge protection according to the requirements of Class III in accordance with IEC 61643-11, EN61643-11:2013. The arrestor serves as surge protection and is used in applications in accordance with IEC 61643-12. The arrestor is installed in the vicinity of the equipment that needs protection in a standard installation/distributor housing. The VPU III R 24V is earthed between the phase and the neutral conductor. With thermal separation device on the varistor. If there is no longer any protection, the colour of the LEDs changes from green to red. The functional state is also displayed by a voltage-free signalling contact (NC contact). Rated voltage: 24 VAC/DC In/max (8/20 µs): 2 kA protection level < 0.89 kV load current Il: 16 A telecommunication output: contact NC: 250 V/0.5 A 48 VDC/0.1 A Type: Weidmüller VPU III R 24 V Order No. 1351580000 or equivalent 
Short specification
Class III arrester with Uoc: 4 kV suitable for 24 V AC/DC mains systems. Protection level < 0.89 kV. With remote alert Type: Weidmüller VPU III R 24 V/4 kV Order no. 1351580000 or equivalent