PVN DC 2I 1O 3MPP SPD2R EVO 11
PVN DC 2I 1O 3MPP SPD2R EVO 11
PVN DC 2I 1O 3MPP SPD2R EVO 11
PVN DC 2I 1O 3MPP SPD2R EVO 11
PVN DC 2I 1O 3MPP SPD2R EVO 11

PVN DC 2I 1O 3MPP SPD2R EVO 11

Photovoltaics, Combiner Box, PV Next, 3 MPP's, 2 Inputs / 1 Output per MPP, Surge protection II, MC4-Evo 2, 1100 V

Ürün No. 2975560000
Veri sayfasını indir Product Downloads
Aksesuarlar 14 aksesuarıdır 2 Yedek parçalar 2 İlgili ürünler 55
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Included in delivery Guarantee Electrical characteristics Enclosure General data Inputs Outputs Surge protection DC side DC load break switch Important note Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Photovoltaics, Combiner Box, PV Next, 3 MPP's, 2 Inputs / 1 Output per MPP, Surge protection II, MC4-Evo 2, 1100 V 
Order No.
2975560000 
Type
PVN DC 2I 1O 3MPP SPD2R EVO 11 
GTIN (EAN)
4099986823150 
Qty.
1 adet

Dimensions and weights

Depth
132 mm
Depth (inches)
5,197 inch
Height
240 mm
Height (inches)
9,449 inch
Width
400 mm
Width (inches)
15,748 inch
Net weight
3.209 g

Temperatures

Ambient temperature
-40 °C…50 °C 
Humidity
5...95 %, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant 
REACH SVHC
Lead 7439-92-1 
SCIP
bdab5698-6a20-4370-8e28-8810d882d01a 

Included in delivery

Included accessories
  • Article:
    Mounting foot
  • Quantity:
    4

Guarantee

Time interval
5 years 

Electrical characteristics

Current per Maximum Power Point, max.
45 A
Rated DC current per connection
  • Current per string, max.:
    45 A
Rated DC voltage
1.100 V
Rated short-term current resistance
  • Rated current:
    56,25 A

Enclosure

Clase de protección
II 
Connection type string
Plug MC4-Evo 2 
Cover
removeable 
Fijación de caja
Via mounting foots 
Impact resistance
IK08 in accordance with IEC 62208 
IK10 in accordance with IEC 62262 
Insulating material
Polyester glass-fibre reinforced, Polycarbonate 
Polycarbonate 
Type of mounting
Wall mounting 

General data

Szabványok
EN 61439-2 
EN 61643-31 
Védelmi osztály
IP65 
설치 위치
Protected outdoor area (Land and Sea) 

Inputs

Amount of maximum power points (MPP)
3 
DC Input + & -
  • Wire connection:
    • Type of connection:
      Stäubli MC4-Evo 2 connector
    • Compatible cable crossection:
      TÜV 2 Pfg1169/08.07
    • Wire cross-section, min.:
      2,5 mm²
    • Wire cross-section, max.:
      16 mm²
Functional earth connector
  • Cable entry:
    • Number of cable entries:
      2
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      25 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      16 mm²
Fuse type
Neither fuse cartridge nor holder 
Fuses
No 
Max. number of DC inputs
per Maximum Power Point 2 inputs connected in parallel 
Number of string inputs per MPP
≤ 2 
Surge protection auxiliary contact
  • Cable entry:
    • Number of cable entries:
      2
  • Wire connection:
    • Type of connection:
      Tension clamp connection with actuator
    • Flexible, max. H05(07) V-K:
      1,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      1,5 mm²
Number of inputs
2 

Outputs

DC Output + & -
  • Wire connection:
    • Type of connection:
      Stäubli MC4-Evo 2 connector
    • Compatible cable crossection:
      TÜV 2 Pfg1169/08.07
    • Wire cross-section, min.:
      2,5 mm²
    • Wire cross-section, max.:
      16 mm²
Max. number of DC outputs
per Maximum Power Point 1 output 

Surge protection DC side

Klasa wymagań
Type II 
Maximum continuous operating voltage DC UCPV mode +/-, -/PE, +/PE
1.100 V
Norme
EN 61439-2 
EN 61643-31 
Pobór mocy w stanie gotowości PC
<0.2 W 
Poziom ochrony Up (+/- , -/PE , +/PE)
≤ 3.8 kV 
Poziom ochrony Up (-/PE)
≤ 3.8 kV 
Protection level Up (+/PE)
≤ 3.8 kV 
Prąd rozładowania, maks. (8/20 µs)
40 kA
Prąd wyładowczy In (8/20 µs)
20 kA 
Prąd zwarciowy ISCPV
11.000 A
PV system voltage, max. Ucpv
1.100 V
Surge protection DC side
1000 V type II 
Łączny prąd wyładowczy Iłączny (8/20 µs)
50 kA
Уровень защиты, Up (+/-)
≤ 3.8 kV 

DC load break switch

Switch disconnector execution
no switch 
Voltage type
DC 

Important note

Product information
The SCIP number was assigned due to a lead content of more than 0.1 % of the net weight.

Safe use instruction according to ECHA:
The identification of the hazardous substance is sufficient to allow safe use of the article throughout its life cycle, including the service life, disassembly and waste/recycling phase 

Classifications

ETIM 8.0
EC003857 
ETIM 9.0
EC003857 
ETIM 10.0
EC003857 
ECLASS 14.0
22-57-02-92 
ECLASS 15.0
22-57-02-92 

Tender specification sheets

Long specification

Combiner box for inverters with 3 MPP tracker, suitable for protecting the DC side of a photovoltaic system according to DIN CLC/TS 51643-32.

MPP1:
3 inputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063
3 outputs, connection via MC4-Evo 2 connector, compatible with cable type TÜV 2 Pfg1169/08.07 / EN 50618:2063

MPP2 to 3:
identical to MPP1

Max. string voltage Uoc: 1100 VDC
1 class/type II arrester with signal contact
Connection of the signal contact via M16 cable glands (Clamping range 5-10 mmØ) max. conductor cross-section: 1.5 mm²
Connection of the functional earth via M16 cable glands (Clamping range 5-10 mmØ) Conductor cross-section: ≥ 16 mm²
Protection class: IP65
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 240x400x132 mm

Approval according to low voltage switchgear and controlgear IEC 61439-1 and EN 61439-2