TS 35X7.5/5X18 2M/ST/SZ
Product image
Similar to illustration
TS 35X7.5/5X18 2M/ST/SZ
Product image
Similar to illustration
TS 35X7.5/5X18 2M/ST/SZ

TS 35X7.5/5X18 2M/ST/SZ

Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm

N.º de artículo 1879090000
Abrir en el configurador
Descargar hoja de datos Engineering Support Product Downloads
Accesorios 20 Productos relacionados 19
Homologaciones General ordering data Dimensions and weights Temperatures Umweltanforderungen Mounting rail Wichtiger Hinweis Clasificaciones

Homologaciones

ROHS
Conformidad 

General ordering data

Version
Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 2000 mm, Height: 35 mm, Depth: 7.5 mm 
Order No.
1879090000 
Type
TS 35X7.5/5X18 2M/ST/SZ 
GTIN (EAN)
4032248473786 
Cantidad
40 

Dimensions and weights

Depth
7,5 mm
Depth (inches)
0,295 inch
Height
35 mm
Altura (pulgadas)
1,378 inch
Width
2 000 mm
Anchura (pulgadas)
78,74 inch
Peso neto
264,815 g

Temperatures

Ambient temperature
-5 °C…40 °C 

Umweltanforderungen

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
Sin SVHC por encima del 0,1 % en peso 

Mounting rail

Basic material
Steel 
Drill-hole diameter
5,2 mm
Installation advice
Direct mounting 
Length of the terminal rail
  • min.:
    0 mm
  • nominal:
    2 000 mm
  • max.:
    2 000 mm
Pre-punched mounting rail
Yes 
Short circuit strength corresponds to E-Cu wire
16 mm²
Short-time withstand current per second according to IEC 60947-7-2
1,92 kA
Slit gap
7 mm
Slit gap
  • min.:
    7 mm
  • nominal:
    7 mm
  • max.:
    7 mm
Slit length
18 mm
Slit length
  • min.:
    18 mm
  • nominal:
    18 mm
  • max.:
    18 mm
Slit width
5,2 mm
Slit width
  • min.:
    5 mm
  • nominal:
    5 mm
  • max.:
    5 mm
Slotted drill holes
Yes 
Solder eyelet hole diameter (D)
5,2 mm
Spacing of holes, centre-to-centre
25 mm
Standards
DIN EN 60715 
Surface finish
galvanic zinc plated and passivated 
Thickness
1 mm

Wichtiger Hinweis

Product information
Tragschienen mit Sendzimier Behandlung haben begrenzte Korrosionsbeständigkeit an den Außen- und Schnittkanten 

Clasificaciones

ETIM 8.0
EC001285 
ETIM 9.0
EC001285 
ETIM 10.0
EC001285 
ECLASS 14.0
27-40-06-02 
ECLASS 15.0
27-40-06-02