VPU AC I F 0 275/25 MP
VPU AC I F 0 275/25 MP
Electric symbol
Schematic circuit diagram

VPU AC I F 0 275/25 MP

Surge voltage arrester, Low voltage, Surge protection

Tuotteen tunnus 3056190000
Lataa tietosivu Engineering Support Product Downloads
Samankaltaiset tuotteet 3
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Important note Classifications

Approvals

ROHS
Conform  

General ordering data

Version
Surge voltage arrester, Low voltage, Surge protection  
Order No.
3056190000  
Type
VPU AC I F 0 275/25 MP  
GTIN (EAN)
4099987030458  
Qty.
1  items

Dimensions and weights

Depth
73  mm
Depth (inches)
2,874  inch
Height
45  mm
Height (inches)
1,772  inch
Width
36  mm
Width (inches)
1,417  inch
Net weight
198  g

Temperatures

Storage temperature
-40 °C...85 °C  
Operating temperature
-40 °C...85 °C  
Humidity
5 - 95% rel. humidity  

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

General data

Colour
orange  
Design
Insta IP 20  
Operating altitude
≤ 2000 m  
Optical function display
green = OK; red = arrester is defective - replace  
Protection degree
IP20 in installed state  
Rail
TS 35  
UL 94 flammability rating
V-0  
Version
Surge protection  

Insulation coordination acc. to EN 50178

Pollution severity
3  
Surge voltage category
III  

Rated data IEC / EN

Discharge current Imax (8/20µs) wire-PE
65 kA  
Discharge current In (8/20µs) wire-PE
25 kA  
Energy coordination (≤10 m)
Type II  
Type I  
Type III  
Follow-on current extinguishing capability Ifi
Not available due for technical reasons  
Frequency range, max.
60  Hz
Frequency range, min.
50  Hz
Fuse
Not required  
internally available  
Integrated back-up fuse
Yes  
Lightning test current Iimp (10/350 µs) (L-PE)
25  kA
Lightning test current Iimp (10/350 µs)
25 kA  
Mains voltage
230 V / 400 V  
Max. continuous voltage, Uc (AC)
305 V  
Protection level Up at IN (L/N-PE)
≤ 2.35 kV  
Rated voltage (AC)
230  V
Requirements category acc. to IEC 61643-11
Type I  
Type II  
Requirements class, acc. to EN 61643-11
T1  
T2  
T3  
Response time
<100 ns  
Short-circuit current rating ISCCR
100  kA
Standards
IEC61643-11, EN61643-11  
Temporary surge voltage (over-voltage) - TOV
442  V
Voltage type
AC  

Connection data

Tightening torque, min.
2  Nm
Wire cross-section, solid, min.
1,5  mm²
Wire connection cross section, finely stranded, min.
1,5  mm²

Electrical data

Voltage type
AC  

General data

Protection degree
IP20 in installed state  
Colour
orange  

Guarantee

Time interval
5 years  

Important note

Product information
If F1 > 315A gG, then the integrated backup fuse always operates before F1  

Classifications

ETIM 6.0
EC000941  
ETIM 7.0
EC000941  
ETIM 8.0
EC000941  
ETIM 9.0
EC000941  
ETIM 10.0
EC000941  
ECLASS 9.0
27-13-08-05  
ECLASS 9.1
27-13-08-05  
ECLASS 10.0
27-13-08-05  
ECLASS 11.0
27-13-08-05  
ECLASS 12.0
27-17-90-90  
ECLASS 13.0
27-17-90-90  
ECLASS 14.0
27-17-90-90  
ECLASS 15.0
27-17-90-90