WGK 50 VP/Z GY BX
Product image
Similar to illustration
WGK 50 VP/Z GY BX
Dimensional drawing
WGK 50 VP/Z GY BX
Graph

WGK 50 VP/Z GY BX

OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 50 mm², Wemid (PA), Direct mounting, Feed-through (bushing)

Item No. 2428300000
Download data sheet Engineering Support Product Downloads
Accessories 6 Related products 6
Godkännanden General ordering data Dimensions and weights Environmental Product Compliance Parametry systemu Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packaging Important note Classifications

Godkännanden

Omologazioni
![](https://assets.dam.weidmueller.com/assets/api/33feeb02-46e9-4a14-9d79-8ec5ee409fe3/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
인증 번호(cURus)
E60693 

General ordering data

Versione
OMNIMATE Power - series WGK, Feed-through terminal, Rated cross-section: 50 mm², Wemid (PA), Direct mounting, Feed-through (bushing) 
N. d’ordine
2428300000 
Tipo
WGK 50 VP/Z GY BX 
GTIN (EAN)
4050118437713 
수량
10 items
Product data
IEC: 690 V / 150 A / 16 - 50 mm²
UL: 600 V / 150 A / AWG 6 - AWG 1/0 
Packaging
Box 

Dimensions and weights

Posizione verticale
54 mm
Height (inches)
2,126 inch
Height of lowest version
54 mm
Larghezza
22,8 mm
Width (inches)
0,898 inch
Lunghezza
22,8 mm
Length (inches)
0,898 inch
순중량
81,4 g

Environmental Product Compliance

Stato conformità RoHS
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Parametry systemu

Famiglia prodotti
OMNIMATE Power – serie WGK 
Tecnica di collegamento cavi
Cable lug: ring cable / spade lug 
Direzione d'uscita del conduttore
180° 
Numero di poli
1 
핀 시리즈 수량
1 
assemblabile da parte del cliente
Yes 
스크류드라이버 블레이드
1.2 x 6.5 
Tightening torque, min.
4 Nm
Tightening torque, max.
5,5 Nm
Clamping screw
M 6 
Stripping length
24 mm
Touch-safe protection acc. to DIN VDE 0470
IP 20 
Protection degree
IP20 
Type of connection 1
Clamping yoke 
Type of connection 2
Screw connection 

Material data

絶縁材
Wemid (PA) 
色
grey 
컬러 차트(유사)
RAL 7035 
UL 94 가연성 등급
V-0 
接点材質
Cu-alloy 
접점 표면
tinned 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

클램프 범위, 최소
10 mm²
클램프 범위, 최대
50 mm²
결선 단면규격 AWG, 최소
AWG 6 
Sezione di collegamento cavo AWG, max.
AWG 1/0 
단선, 최소 H05(07) V-U
16 mm²
단선, 최대 H05(07) V-U
16 mm²
꼬임, 최소 H07V-R
16 mm²
stranded, 최대 H07V-R
50 mm²
연선, 최소 H05(07) V-K
16 mm²
연선, 최대 H05(07) V-K
50 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최소
10 mm²
플라스틱 소매 페럴 포함, DIN 46228 pt 4, 최대
50 mm²
와이어 엔드 페룰 포함, DIN 46228 pt 1, 최소
10 mm²
ワイヤエンドフェルール付　DIN 46228 pt 1、最大
50 mm²
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      35 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        25 mm
    • Recommended wire-end ferrule:
      9004190000
참조 텍스트
Length of ferrules is to be chosen depending on the product and the rated voltage. 
The outside diameter of the plastic collar should not be larger than the pitch (P) 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
定格電流、最小極数 （Tu=20°C）
150 A
定格電流、最大極数（Tu=20°C）
150 A
サージ電圧等級の定格電圧 / 汚染度 III/3
690 V
Sovratensione nominale con classe di sovratensione/grado di lordura III/3
6 kV

Rated data acc. to CSA

Tensione nominale (Gruppo B / CSA)
600 V
Tensione nominale (Gruppo C / CSA)
600 V
정격 전압(사용 그룹 D / CSA)
300 V
정격 전류(사용 그룹 B / CSA)
150 A
Corrente nominale (Gruppo C / CSA)
150 A
Corrente nominale (Gruppo D / CSA)
10 A
Sezione di collegamento cavo AWG, min.
AWG 6 
Sezione di collegamento cavo AWG, max.
AWG 1/0 

Rated data acc. to UL 1059

Istituto (cURus)
CURUS 
N° certificato (cURus)
E60693 
Tensione nominale (Gruppo B / UL 1059)
600 V
Tensione nominale (Gruppo C / UL 1059)
600 V
정격 전압(사용 그룹 D / UL 1059)
300 V
정격 전류(사용 그룹 B / UL 1059)
150 A
정격 전류(사용 그룹 C / UL 1059)
150 A
정격 전류(사용 그룹 D / UL 1059)
10 A
와이어 단면적, AWG, 최소
AWG 6 
Wire cross-section, AWG, max.
AWG 1/0 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packaging

Imballaggio
Box 
Lunghezza VPE
211 mm
Larghezza VPE
97 mm
Altezza VPE
60 mm

Important note

Note
  • Clearance and creepage distances to other components must be devised in accordance with the relevant application standard. This can be achieved in the device by full encapsulation or by the use of additional spacer plates.
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Colours: SW = black; GN/YL = green/yellow; GY = grey
  • Additional variants on request
  • WGK: Rated voltage plastic walls: 1 - 6 mm = 800 V; metal walls: 1 - 2.5 mm = 800 V; metal walls: 2.5 - 6 mm = 690 V
  • Wire-end ferrules are mandatory for stranded wires with more than 19 strands.
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC001283 
ETIM 9.0
EC001283 
ETIM 10.0
EC001283 
ECLASS 14.0
27-14-11-34 
ECLASS 15.0
27-14-11-34