ACT20P-CI-CO-P
Product image
ACT20P-CI-CO-P
Connection diagram
ACT20P-CI-CO-P
Dimensioned drawing
ACT20P-CI-CO-P
Similar to illustration
ACT20P-CI-CO-P
Drawing

ACT20P-CI-CO-P

Amplificateur de séparation analogique, Entrée : 0(4)-20 mA, Sortie : 0(4)-20 mA, Isolateur/convertisseur de signaux, HART®

Produkt ID 2489680000
Download datablad Engineering Support Product Downloads
Tilbehør 2 Enkeltdele 1 Anvendte produkter 15
Approvals Informations générales de commande Dimensiones y pesos Températures 장애 확률 Conformité environnementale du produit Input Output General data Insulation coordination Data for Ex applications (ATEX) Dane przyłączeniowe Part description Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_322323/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319213/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319240/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80) 
Approvals
CULUS; 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate no. (cULus)
E469563 
Certificate no. (cULusEX)
E338066 

Informations générales de commande

Version
Amplificateur de séparation analogique, Entrée : 0(4)-20 mA, Sortie : 0(4)-20 mA, Isolateur/convertisseur de signaux, HART® 
Order No.
2489680000 
Type
ACT20P-CI-CO-P 
GTIN (EAN)
4050118535150 
Qty.
1 Styk

Dimensiones y pesos

Depth
113,7 mm
Profondeur (pouces)
4,476 inch
Height
127,1 mm
Height (inches)
5,004 inch
Width
12,5 mm
Width (inches)
0,492 inch
Net weight
120 g

Températures

Storage temperature
-40 °C...85 °C 
Operating temperature
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
5...95 %, no condensation 

장애 확률

SIL in compliance with IEC 61508
Brak 

Conformité environnementale du produit

RoHS Compliance Status
Conforme avec exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Input current
0...20 mA 
4…20mA 
Input signal
HART signal® bidirectional 
Number inputs
1 
Sensor
2-wire transmitter (without own power supply) 
3-wire sensor 
4- wire sensor (with own power supply) 
Sensor supply
> 17 V DC at 20 mA 
Voltage drop
≤ 1 V 

Output

Load impedance current
≤ 550 Ω 
Number of outputs
1 
Output current
0…20 mA (if input: 0…20 mA) 
4…20 mA (if input: 4…20 mA) 
HART® digital signal 
Type
active 
connected control must be passive 

General data

Accuracy
<0.1 % of end value 
Configuration
none 
Current consumption
≤60 mA (24V power supply, 20mA output) 
Mounting rail
TS 35 
Nominal power consumption
2 VA
Operating altitude
≤ 2000 m 
Protection degree
IP20 
Step response time
≤ 0,5 ms 
Supply voltage
20…30 V DC 
Temperature coefficient
80 ppm/K 
Type of signal forwarding according to HART®
unchanged 

Insulation coordination

EMC standards
EN 61326-1 
EN 61000-6-2 
EN 61000-6-4 
Galvanic isolation
3-way isolator 
between input ⁄ output ⁄ supply 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Insulation voltage
2 kV inputs / outputs / power supply 
Pollution severity
2 
Surge voltage category
III 
Test voltage
0,3 kV

Data for Ex applications (ATEX)

IECEx - gas labelling
Ex ec IIC T5 Gc 
Marking
II 3 G Ex ec IIC T5 Gc 

Dane przyłączeniowe

Type of connection
PUSH IN 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0,2 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5 mm²

Part description

Product description
The non-adjustable DC isolating amplifier ACT20P-CI-CO isolates analogue standard current signals from a power source or from a 2- or 3-wire sensor. An analogue input current signal is linearly converted into an analogue output current signal and is galvanically isolated. The power supply is galvanically isolated from the input and output (3-way isolation).

Properties
  • HART-compatible for 0.5 - 2.5 kHz
  • The active or passive mA signal inputs are fully galvanically isolated.
  • Operating status display on a front panel LED
  • Galvanic 3-way isolation between input, output and supply.
 

Classifications

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20