BCF 3.81/16/180LRZE SN OR BX
Product image
BCF 3.81/16/180LRZE SN OR BX
Product image
BCF 3.81/16/180LRZE SN OR BX
Dimensional drawing
BCF 3.81/16/180LRZE SN OR BX
Graph
BCF 3.81/16/180LRZE SN OR BX
Graph
BCF 3.81/16/180LRZE SN OR BX
Graph
BCF 3.81/16/180LRZE SN OR BX
Felhasználási példa
BCF 3.81/16/180LRZE SN OR BX
Felhasználási példa
BCF 3.81/16/180LRZE SN OR BX
A termék előnyei
  • Önzáró mechanizmus
  • Közvetlenül, bedugott állapotban
BCF 3.81/16/180LRZE SN OR BX
A termék előnyei
  • Erős PUSH-IN csatlakozás
  • Biztos és tartós

BCF 3.81/16/180LRZE SN OR BX

PCB plug-in connector, female plug, 3.81 mm, Number of poles: 16, 180°, PUSH IN with push button, Clamping range, max. : 1.5 mm², Box

Ürün No. 2442940000
Veri sayfasını indir Engineering Support Product Downloads
İlgili ürünler 16
Approvals General ordering data Dimensions and weights Environmental Product Compliance System Parameters Material data Conductors suitable for connection Rated data acc. to IEC Rated data acc. to CSA Rated data acc. to UL 1059 Packing Type tests Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319230/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate No. (cURus)
E60693 

General ordering data

Version
PCB plug-in connector, female plug, 3.81 mm, Number of poles: 16, 180°, PUSH IN with push button, Clamping range, max. : 1.5 mm², Box 
Order No.
2442940000 
Type
BCF 3.81/16/180LRZE SN OR BX 
GTIN (EAN)
4050118542967 
Förp.
50 adet
Product data
IEC: 320 V / 17.5 A / 0.14 - 1.5 mm²
UL: 300 V / 10 A / AWG 26 - AWG 16 
Packaging
Box 

Dimensions and weights

Depth
34,6 mm
Depth (inches)
1,362 inch
Height
15,09 mm
Height (inches)
0,594 inch
Width
71,55 mm
Width (inches)
2,817 inch
净重
13,34 g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

System Parameters

Termékcsalád
OMNIMATE Signal - series BC/SC 3.81 
Csatlakozás típusa
Field connection 
Vezetékcsatlakozás-technika
PUSH IN with push button 
Raszter mm-ben (P)
3,81 mm
Raszter inch-ben (P)
0,15 "
Vezeték kimeneti irány
180° 
Pólusszám
16 
L1, mm
57,15 mm
L1, inch
2,25 "
Sorok száma
1 
Érintkezősorok száma
1 
Névleges keresztmetszet
1 mm²
Touch-safe protection acc. to DIN VDE 57 106
Safe from finger touch 
Érintésvédelem a DIN VDE 0470 szerint
IP20 plugged/ IP10 unplugged 
Protection degree
IP20 
Térfogati ellenállás
≤5 mΩ 
Kódolható
Yes 
Stripping length
9 mm
Screwdriver blade
0.4 x 2.5 
Screwdriver blade standard
DIN 5264 
Plugging cycles
25 
Plugging force/pole, max.
8 N
Pulling force/pole, max.
7 N

Material data

Materiales aislantes
PA 66 GF 30 
Colour
orange 
Colour chart (similar)
RAL 2000 
Группа изоляционного материала
II 
Сравнительный показатель пробоя (CTI)
≥ 550 
Insulation resistance
≥ 108 Ω 
UL 94 flammability rating
V-0 
Materiale dei contatti
Copper alloy 
Powierzchnia styku
tinned 
플러그 접점의 레이어 구조
4...8 µm Sn matt 
Storage temperature, min.
-40 °C
Storage temperature, max.
70 °C
Operating temperature, min.
-50 °C
Operating temperature, max.
120 °C
Temperature range, installation, min.
-25 °C
Temperature range, installation, max.
120 °C

Conductors suitable for connection

Sección de embornado, mín.
0,14 mm²
1,5 mm²
Поперечное сечение подключаемого провода AWG, мин.
AWG 26 
Wire connection cross section AWG, max.
AWG 16 
Одножильный, мин. H05(07) V-U
0,14 mm²
Solid, max. H05(07) V-U
1,5 mm²
Гибкий, мин. H05(07) V-K
0,14 mm²
Гибкий, макс. H05(07) V-K
1,5 mm²
С наконечником DIN 46 228/4, мин.
0,25 mm²
С наконечником DIN 46 228/4, макс.
1 mm²
con terminale, DIN 46228 pt 1, min.
0,25 mm²
z końcówką kablową wg DIN 46 228/1, maks.
1,5 mm²
Plug gauge in accordance with EN 60999 a x b; ø
2.4 mm x 1.5 mm; 1.9mm 
Clampable conductor
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,5 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025870000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9004050000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,75 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9025860000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0542500000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      1 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        12 mm
    • Recommended wire-end ferrule:
      9019100000
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      0282800000
  • Cross-section for conductor connection:
    • Type:
      fine-wired
    • nominal:
      0,34 mm²
  • wire end ferrule:
    • Stripping length:
      • nominal:
        10 mm
    • Recommended wire-end ferrule:
      9025770000
참조 텍스트
The outside diameter of the plastic collar should not be larger than the pitch (P) 
Length of ferrules is to be chosen depending on the product and the rated voltage. 

Rated data acc. to IEC

tested acc. to standard
IEC 60664-1 
IEC 61984 
Номинальный ток, мин. кол-во контактов (Tu = 20 °C)
17,5 A
Номинальный ток, макс. кол-во контактов (Tu = 20 °C)
17,5 A
Corriente nominal, número de polos mín. (Tu=40 °C)
17,5 A
Номинальный ток, макс. кол-во контактов (Tu = 40 °C)
16,3 A
Номинальное импульсное напряжение при категории помехозащищенности/Категория загрязнения II/2
320 V
Номинальное импульсное напряжение при категории помехозащищенности/Категория загрязнения III/2
160 V
Номинальное импульсное напряжение при категории помехозащищенности/Категория загрязнения III/3
160 V
Номинальное импульсное напряжение при категории помехозащищенности/Категория загрязнения II/2
2,5 kV
额定冲击电压（过压等级III/污染等级2）
2,5 kV
Tension de choc nominale pour classe de surtension/Degré de pollution III/3
2,5 kV
Short-time withstand current resistance
3 x 1s with 76 A 

Rated data acc. to CSA

Névleges feszültség (B felhasználási csoport / CSA)
300 V
Névleges feszültség (C felhasználási csoport / CSA)
50 V
Névleges feszültség (D felhasználási csoport / CSA)
300 V
Névleges áram (B felhasználási csoport / CSA)
10 A
Névleges áram (D felhasználási csoport / CSA)
10 A
Vezeték keresztmetszet, AWG, min.
AWG 26 
Vezeték keresztmetszet, AWG, max.
AWG 16 

Rated data acc. to UL 1059

Intézet (cURus)
CURUS 
Tanúsítvány száma (cURus)
E60693 
Névleges feszültség (B felhasználási csoport / UL 1059)
300 V
Névleges feszültség (D felhasználási csoport / UL 1059)
300 V
Névleges áram (B felhasználási csoport/ UL 1059)
10 A
Névleges áram (D felhasználási csoport/ UL 1059)
10 A
Vezeték keresztmetszet, AWG, min.
AWG 26 
Vezeték keresztmetszet, AWG, max.
AWG 16 
Reference to approval values
Specifications are maximum values, details - see approval certificate. 

Packing

Csomagolás
Box 
VPE hosszúság
313 mm
VPE szélesség
134 mm
VPE magasság
47 mm

Type tests

Teszt: Helytelen illesztés (nem felcserélhetők)
  • Test:
    visual examination
  • Evaluation:
    passed

Important note

IPC conformity
Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. 
Notes
  • Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
  • Rated current related to rated cross-section & min. No. of poles.
  • P on drawing = pitch
  • Conductors suitable for connection: 1.5 mm² with wire-end ferrule with plastic collar, DIN 46 228/1, with a rated voltage of 125V/2.5 kV with III/3 or 250 V/2.5 kV with II/2
  • Crimp shape A for wire-end ferrules with crimping tools PZ 1,5 (order no. 9005990000) or PZ 6/5 (order no. 9011460000) for larger wire cross-sections recommended.
  • Wire end ferrule without plastic collar to DIN 46228/1
  • Wire end ferrule with plastic collar to DIN 46228/4
  • The test point can only be used as potential-pickup point.
  • In accordance with IEC 61984, OMNIMATE-connectors are connectors without breaking capacity (COC). During designated use, connectors are not allowed to be engaged or disengaged when live or under load
  • Long term storage of the product with average temperature of 50 °C and maximum humidity 70%, 36 months
 

Classifications

ETIM 8.0
EC002638 
ETIM 9.0
EC002638 
ETIM 10.0
EC002638 
ECLASS 14.0
27-46-02-02 
ECLASS 15.0
27-46-02-02