HDC HP 550 M 185
HDC HP 550 M 185

HDC HP 550 M 185

HDC insert, Male, 3600 V, Crimp connection, Installation size: 550

Product ID 1120580000
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Toebehoren 1 Is accessoire van 1 Verwante producten 16
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Power contact Version Important note Classifications

Approvals

ROHS
Conform 

General ordering data

Version
HDC insert, Male, 3600 V, Crimp connection, Installation size: 550 
Order No.
1120580000 
Type
HDC HP 550 M 185 
GTIN (EAN)
4032248901821 
Qty.
1 items

Dimensions and weights

Length
91 mm
Length (inches)
3,583 inch
Diameter
43 mm
Net weight
215,6 g

Temperatures

Limit temperature
-50 °C ... 120 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
6eabd5ae-2d6b-409e-8bdf-87c27ee10e40 

General data

Basic material
Copper alloy 
BG
550 
Colour
black 
Conductor cross-section
185 mm²
DIN EN 61984 szerinti névleges áram (környezeti hőmérséklet=20°C)
430 A
Installation size
550 
Insulating material
PA GF 
Insulation resistance
1010 Ω 
Plugging cycles
≥ 500 
Plugging cycles, silver
≥ 500 
Pollution severity
PD 2 (PD 3) 
Rated impulse voltage (DIN EN 61984)
15 kV
Series
HighPower 
Surface finish
Silver passivated 
Tensión nominal (DIN EN 61984)
3.600 V
Type
Male 
Type of connection
Crimp connection 
UL 94 flammability rating
V-0 
Volume resistance
≤0.1 mΩ 

Power contact

Rated impulse voltage (DIN EN 61984), power contact
15 kV
Stripping length, performance contact
30 mm
Type of connection, power contact
Crimp connection 

Version

Basic material
Copper alloy 
BG
550 
Ledardiameter, min.
185 mm²
Rezystancja skrośna
≤0.1 mΩ 
Rodzaj przyłącza
Crimp connection 
Rozmiar instalacji
550 
Surface finish
Silver passivated 
Поперечное сечение соединительного провода, макс.
185 mm²
탈피 길이, 정격 결선
30 mm

Important note

Product information
Depending on the intended operation, internally generated voltages can superimpose the working voltage and contain corresponding peaks. It is imperative to ensure that these peak voltages do not exceed the rated voltage. For applications outside of this specification, please contact us. The rated voltage of 3.6 kV must be reduced by 20% at operating temperatures above 100°C. 

Classifications

ETIM 8.0
EC000796 
ETIM 9.0
EC000796 
ETIM 10.0
EC000796 
ECLASS 14.0
27-44-02-04 
ECLASS 15.0
27-44-02-04