KSPMH M63 SSC
Similar to illustration

KSPMH M63 SSC

Bu ürün artık mevcut değil.

Alternative product: 1188750000

KSPMH (Klippon blanking plug, type MH), Blanking plug, straight, M 63, 16 mm, Stainless steel 1.4404 (316L)

Ürün No. 1477950000
Veri sayfasını indir Mühendislik desteği
Aksesuarlar 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Certificate numbers cable gland General information Classifications

Approvals

ROHS
Conform 

General ordering data

Version
KSPMH (Klippon blanking plug, type MH), Blanking plug, straight, M 63, 16 mm, Stainless steel 1.4404 (316L) 
Order No.
1477950000 
Type
KSPMH M63 SSC 
GTIN (EAN)
4050118285840 
Qty.
1 adet
Delivery status
Discontinued 
Last order date
/Date(1725055200000)/ 
Alternative product
[1188750000](~/p/1188750000) 

Dimensions and weights

Height
21,5 mm
Height (inches)
0,846 inch
Length
22 mm
Length (inches)
0,866 inch
Diameter
63 mm
Wall thickness, min.
0,5 mm
Wall thickness, max.
15 mm
Net weight
604,56 g

Temperatures

Operating temperature
-60 °C...200 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Certificate numbers cable gland

Approval conditions
ATEX 
IECEX 
Certificate no. cable gland (ATEX)
SIRA 09ATEX1320X or CML 19ATEX1089X 
Certificate no. cable gland (IECEx)
IECEx SIR 09.0131X or IECEx CML 19.0022X 
Identification
Ex d IIC Gb 
Ex e IIC Gb 
Ex tb lllC Db 

General information

Basic material
Stainless steel 1.4404 (316L) 
Diameter of sealing ring
63 mm
External thread
M 63 
Halogen
halogen-free 
Impact resistance
7 J ATEX version 
Length of thread
16 mm
Note: protection class
• All metric sealing plugs have a thread pitch of 1.5 mm. • In Ex nR applications, the KSPMH must be fitted with a further seal. • To obtain the specified IP rating, the through hole must comply with the regulations of EN 50262 Table 1 and it should be possible to secure the sealing plug in a suitable manner. • Operating instructions are enclosed with each sealing plug; these must be read prior to installation. The sealing plugs must be installed according to the specifications in the operating instructions. • On installation of the KSPMH, the minimum number of engaged thread turns in line with the standard EN/IEC 60079-1, Section 5.3, must be observed. • With NEC / CEC applications, it must be ensured that the inner thread of the connection device into which the sealing plugs are screwed reveals at least 8 fully engaged thread turns. • If KSPMH sealing plugs are inserted into non-metallic Ex e connection devices, they must be connected to the system's earth circuit. 
O-Ring
Silicone 
O.D.
68,5 mm
Operating temperature range, max.
200 °C
Operating temperature range, min.
-60 °C
Protection class (UL)
Type 4X 
Protection degree
IP66 
IP68 (100 m / 168 h) 
Silicone
Yes 
Standards
EN 60079-31 
EN 60079-0 
EN 60079-1 
EN 60079-7 
Tightening torque
10 Nm
Water depth
100 m 

Classifications

ETIM 8.0
EC000451 
ETIM 9.0
EC000451 
ETIM 10.0
EC000451 
ECLASS 14.0
27-14-08-05 
ECLASS 15.0
27-14-08-05