VPU II 0 PV 1000V DC
VPU II 0 PV 1000V DC
Electric symbol
Circuit diagram

VPU II 0 PV 1000V DC

Tämä tuote ei ole pian enää saatavana.

Available until: 01.06.2026

Alternative product: 2530660000

Surge voltage arrester, Low voltage, Accessories, Surge protection II

Tuotteen tunnus 1351190000
Lataa tietosivu Product Downloads Engineering Support
Lisävarusteet 2 Samankaltaiset tuotteet 3
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Insulation coordination acc. to EN 50178 Photovoltaic technical data Rated data IEC / EN Connection data Electrical data General data Classifications Tender specification sheets

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, Accessories, Surge protection II 
Order No.
1351190000 
Type
VPU II 0 PV 1000V DC 
GTIN (EAN)
4050118158847 
Qty.
1 items
Delivery status
This article will no longer be available in the future. 
Available until
01.06.2026 
Alternative product
[2530660000](~/p/2530660000) 

Dimensions and weights

Depth
64 mm
Depth (inches)
2,52 inch
Height
52 mm
Height (inches)
2,047 inch
Width
17,8 mm
Width (inches)
0,701 inch
Net weight
103 g

Temperatures

Storage temperature
-40 °C...80 °C 
Operating temperature
-40 °C... 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

General data

Colour
orange 
Design
Installation housing; 1TE 
Insta IP 20 
Mounting rail
TS 35 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 
UL 94 flammability rating
V-0 
Version
Surge protection II 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Photovoltaic technical data

Máx. tensión de servicio continua modo DC UCPV +/- , -/PE , +/PE
1 000 V
Protection level Up (+/- , -/PE , +/PE)
≤ 2.6 kV 
Requirements class
Type II 
Schutzpegel Up bei IN (pro Modul)
≤ 2.8 kV 
Short-circuit curent ISCPV
200 A
Spannung der PV Anlage, max. UCPV
1 000 V
Standards
EN 50539-11 

Rated data IEC / EN

Avledningsström In (8/20 µs) ledare-PE
12.5 kA 
Corriente de fuga a Un
30 µA
Discharge current Imax (8/20µs) wire-PE
25 kA 
Integrated back-up fuse
No 
Maksymalne napięcie stałe, Uc (DC)
1000 V 
Normy
EN 50539-11 
Protection level Up at IN (L/N-PE)
≤ 2.8 kV 
Response time / fallback time
≤ 25 ns 
Tension nominale (DC)
1000 V 
Tensione PV secondo IEC 60364-7-712
≤ 1000 V 
Tipo di tensione
DC 
극 수
1 

Connection data

Type of connection
pluggable 
Wire connection cross section, finely stranded, min.
1,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Connection cross-section, stranded, min.
1,5 mm²
Connection cross-section, stranded, max.
35 mm²

Electrical data

Voltage type
DC 

General data

Number of poles
1 
Protection degree
IP20 
Colour
orange 

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-90-90 
ECLASS 15.0
27-17-90-90 

Tender specification sheets

Long specification
Spare arrestor consisting of V0 material for surge voltage arrestor VPU II 1000 VDC series The pluggable high-performance varistors can be exchanged by trained personnel following a failure. Rated voltage: 1000 VDC for PV systems Type: Weidmüller VPU II 0 PV 1000 VDC Order No.: 1351190000 
Short specification
Spare arrester for surge voltage arrester VPU II 1000 V DC series The pluggable high-performance varistors can be swapped by trained personnel following a failure. Rated voltage: 1000 V DC for PV systems Type: Weidmüller VPU II 0 PV 1000 V DC Order no.: 1351190000