ACT20P-VI1-CO-OLP-P
Similar to illustration
ACT20P-VI1-CO-OLP-P
Connection diagram
ACT20P-VI1-CO-OLP-P
Dimensioned drawing
ACT20P-VI1-CO-OLP-P
Similar to illustration
ACT20P-VI1-CO-OLP-P
Drawing

ACT20P-VI1-CO-OLP-P

Passive isolator, Input : 0-5 V, Output : 4-20 mA, (loop powered), Signal converter/isolator, Output current loop powered

Produkt ID 7760054355
Åbn i konfiguratoren
Download datablad Engineering Support Product Downloads
Tilbehør 2 Enkeltdele 1 Anvendte produkter 14
Approvals General ordering data Dimensions and weights Temperatures Probability of failure Environmental Product Compliance Input Output General data Insulation coordination Data for Ex applications (ATEX) Connection data Part description Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319228/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319231/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319213/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319240/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate No. (cURusEX)
E338066 
Certificate no. (cULus)
E469563 

General ordering data

Version
Passive isolator, Input : 0-5 V, Output : 4-20 mA, (loop powered), Signal converter/isolator, Output current loop powered 
Order No.
7760054355 
Type
ACT20P-VI1-CO-OLP-P 
GTIN (EAN)
4050118559491 
Qty.
1 Styk

Dimensions and weights

Depth
114 mm
Depth (inches)
4,488 inch
Height
127,1 mm
Height (inches)
5,004 inch
Width
12,5 mm
Width (inches)
0,492 inch
Net weight
130 g

Temperatures

Storage temperature
-40 °C...85 °C 
Operating temperature
-20 °C...60 °C 
Humidity at operating temperature
0...95 % (no condensation) 
Humidity
5...95 %, no condensation 

Probability of failure

SIL in compliance with IEC 61508
None 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Input resistance, voltage
≥ 300 kΩ 
Input voltage
0…5 V DC 
Number inputs
1 
Sensor
Voltage source 

Output

Load impedance current
≤ 600 Ω 
Number of outputs
1 
Output current
4...20 mA, loop-powered 
Type
passive 
connected control must be active 

General data

Altitudine di esercizio
≤ 2000 m 
Coefficient de température
≤ 100 ppm/K 
Genauigkeit
<0.1 % of end value 
Konfiguráció
none 
Mounting rail
TS 35 
Nominal power consumption
2 VA
Protection degree
IP20 
Supply voltage
via output current loop 
min. 12 V DC/ max. 30 V DC 
Tiempo de respuesta
≤ 1 ms 
전력 소비, 일반적
2 W

Insulation coordination

EMC standards
EN 61326-1 
EN 61000-6-2 
EN 61000-6-4 
Galvanic isolation
2-way isolator 
Impulse withstand voltage
4 kV (1.2/50 µs) 
Insulation voltage
2 kV inputs / outputs 
Jmenovité napětí
300 V 
Pollution severity
2 
Surge voltage category
III 

Data for Ex applications (ATEX)

Oznakowanie
II 3 G Ex ec IIC T6 Gc 
Маркировка IECEx, газ
Ex ec IIC T6 Gc 

Connection data

Type of connection
PUSH IN 
Tightening torque, min.
0,4 Nm
Tightening torque, max.
0,6 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
2,5 mm²
Wire connection cross section AWG, min.
AWG 26 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0,2 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5 mm²

Part description

제품 설명
The ACT20P-VIX-CO-OLP-S single-channel fixed passive isolator isolates and converts analogue standard signals. An analogue input voltage signal is linearly converted into an analogue output current signal and galvanically isolated. The device is powered via the output current loop.

Features
  • 2-way galvanic isolation between input and output.
 

Classifications

ETIM 8.0
EC002653 
ETIM 9.0
EC002653 
ETIM 10.0
EC002653 
ECLASS 14.0
27-21-01-20 
ECLASS 15.0
27-21-01-20