ACT20X-SDI-HDO-L-P

EX signal isolating converter, Safe-input: relay, Ex-output: Opto module, 1-channel, Output current : max. 35 mA

Tuotteen tunnus 2456110000

Approvals

Approvals
ROHS
UL File Number Search
Certificate no. (cULus)

General ordering data

Version
Order No.
Type
GTIN (EAN)
Qty.

Dimensions and weights

Depth
Depth (inches)
Height
Height (inches)
Width
Width (inches)
Net weight

Temperatures

Storage temperature
Operating temperature
Humidity

Probability of failure

SIL PAPER
SIL in compliance with IEC 61508
MTBF

Environmental Product Compliance

RoHS Compliance Status
RoHS Exemption (if applicable/known)
REACH SVHC
SCIP

Assembling

Mounting position
Mounting rail
Type of mounting

Input

Input resistance, voltage
Input voltage
Number inputs
Sensor
Type

Digital output

Max. switching frequency

Output (Status)

Alarm function
Continuous current
Hysteresis
Nominal switching voltage
Power rating
Type

General specifications

Configuration
Humidity
Operating altitude
Power consumption
Protection degree
Step response time
Supply voltage
Type of connection

Insulation coordination

EMC standards
Insulation voltage
Rated voltage
Standards

Data for Ex applications (ATEX)

Installation location

Safety-related basic specifications

Description of the "safe state"
Device type
Diagnostic test interval
Tproof
Total failure rate for safe detected failures (λSD)
Hardware fault tolerance (HFT)
Safety category
Safe Failure Fraction (SFF)
Mean Time To Repair (MTTR)
Total failure rate for safe undetected failures (λSU)
Total failure rate for dangerous detected failures (λDD)
Total failure rate for dangerous undetected failures (λDU)
Probability of outage PFH
Demand mode
Demand rate
Demand response time

Safety-related specifications Low demand mode

Average Probability of Failure on Demand (PFDavg)

Connection data

Type of connection
Wire connection cross section AWG, min.
Wire connection cross section AWG, max.
Wire cross-section, solid, min.
Wire cross-section, solid, max.
Wire connection cross section, finely stranded, min.
Wire connection cross section, finely stranded, max.
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.

Guarantee

Time interval

Important note

Product information

Classifications

ETIM 6.0
ETIM 7.0
ETIM 8.0
ETIM 9.0
ETIM 10.0
ECLASS 9.0
ECLASS 9.1
ECLASS 10.0
ECLASS 11.0
ECLASS 12.0
ECLASS 13.0
ECLASS 14.0
ECLASS 15.0