TRPL 48-110VDC 1CO AU TRAK
Similar to illustration
TRPL 48-110VDC 1CO AU TRAK
Similar to illustration
TRPL 48-110VDC 1CO AU TRAK
Wiring diagram
TRPL 48-110VDC 1CO AU TRAK
Graph
DC load limit curve
Resistive load
TRPL 48-110VDC 1CO AU TRAK
Dimensional drawing
TRPL 48-110VDC 1CO AU TRAK
Miscellaneous
Type codes

TRPL 48-110VDC 1CO AU TRAK

TERMSERIES-compact, Relay module, Number of contacts: 1, CO contact Au (Gold), AgSnO2, Rated control voltage: 48 V…110 V DC +25 % / -30 %, Continuous current: 6 A, PUSH IN, Test button available: No

Ürün No. 2774000000
Veri sayfasını indir Engineering Support Product Downloads
Aksesuarlar 27 İlgili ürünler 4
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Connection data Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80)  
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319260/-S800/-T1z1mm-S80)  

General ordering data

Version
TERMSERIES-compact, Relay module, Number of contacts: 1, CO contact Au (Gold), AgSnO2, Rated control voltage: 48 V…110 V DC +25 % / -30 %, Continuous current: 6 A, PUSH IN, Test button available: No  
Order No.
2774000000  
Type
TRPL 48-110VDC 1CO AU TRAK  
GTIN (EAN)
4064675037774  
Qty.
10  adet

Dimensions and weights

Depth
62,5  mm
Depth (inches)
2,461  inch
Height
89,4  mm
Height (inches)
3,52  inch
Width
6,4  mm
Width (inches)
0,252  inch
Net weight
25  g

Temperatures

Storage temperature
-40 °C...85 °C  
Ambient temperature
-40 °C…70 °C  
Humidity
95 % for 30 days, minimal condensation to EN 50155  

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption  
RoHS Exemption (if applicable/known)
7a, 7cI  
REACH SVHC
Lead 7439-92-1  
SCIP
75e5f661-708e-44b0-9fc2-4f6c675b3b71  

Control side

Rated control voltage
48 V…110 V DC +25 % / -30 %  
Rated current DC
2.4 mA @ 48 V DC  
3.2 mA @ 110 V DC  
Power rating
115 mW @ 48 V DC  
352 mW @ 110 V DC  
Coil resistance
10600 Ω ± 15 %  
Status indicator
Green LED  
Protective circuit
Suppressor diode  
Free-wheeling diode  

Load side

Rated switching voltage
250 V AC  
Continuous current
6 A  
Max. switching frequency at rated load
0,1  Hz
Max. switching voltage, AC
250  V
Max. switching voltage, DC
250  V
Min. switching power
50 mW  
Inrush current
20 A / 20 ms  
AC switching capacity (resistive), max.
1500 VA  
Switch-on delay
<11 ms  
Switch-off delay
<30 ms  
Contact type
1 CO contact (Au (Gold), AgSnO2)  
Mechanical service life
10 x 106 switching cycles  

General data

Operating altitude
≤ 2000 m  
above sea level  
Version
for railway applications  
Mounting rail
TS 35  
Test button available
No  
Colour
black  
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-0
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    V-0
  • Component:
    Pusher
  • UL94 flammability rating:
    V-0

Insulation coordination

Rated voltage
300  V
Pollution severity
2  
Surge voltage category
III  
Clearance and creepage distances for control side - load side
≥ 6 mm  
Dielectric strength for control side - load side
4 kVeff / 1 Min.  
Type of isolation at input and output
reinforced insulation  
Dielectric strength of open contact
1 kVeff / 1 min  
Dielectric strength to mounting rail
4 kVeff / 1 Min.  
Impulse withstand voltage
6 kV (1.2/50 µs)  
Protection degree
IP20  

Connection data

Wire connection method
PUSH IN  
Stripping length, rated connection
9  mm
Clamping range, rated connection
1,5  mm²
Clamping range, min.
0,14  mm²
Clamping range, max.
2,5  mm²
Wire connection cross section AWG, min.
AWG 26  
Wire connection cross section AWG, max.
AWG 14  
Wire cross-section, solid, min.
0,5  mm²
Wire cross-section, solid, max.
1,5  mm²
Wire cross-section, solid, min. (AWG)
AWG 26  
Wire cross-section, solid, max. (AWG)
AWG 14  
Wire connection cross section, finely stranded, min.
0,35  mm²
Wire connection cross section, finely stranded, max.
2,5  mm²
Wire cross-section, finely stranded, min. (AWG)
AWG 26  
Wire cross-section, finely stranded, max. (AWG)
AWG 14  
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,14  mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
1,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5  mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
1,5  mm²
Blade size
0.6 x 3.5 mm  

Classifications

ETIM 6.0
EC001437  
ETIM 7.0
EC001437  
ETIM 8.0
EC001437  
ETIM 9.0
EC001437  
ETIM 10.0
EC001437  
ECLASS 9.0
27-37-16-01  
ECLASS 9.1
27-37-16-01  
ECLASS 10.0
27-37-16-01  
ECLASS 11.0
27-37-16-01  
ECLASS 12.0
27-37-16-01  
ECLASS 13.0
27-37-16-01  
ECLASS 14.0
27-37-16-01  
ECLASS 15.0
27-37-16-01