VG M16 EXE MS
Similar to illustration

VG M16 EXE MS

VG Ex MS (Ex brass cable gland), Cable glands, straight, M 16, 16 mm, OD min. 3 - OD max. 12 mm, IP66, IP68, Brass, nickel-plated

Product ID 1460040000
Gegevensblad downloaden Engineering Support Product Downloads
Toebehoren 1 Verwante producten 5
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Certificate numbers cable gland General information Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
Approvals
EAC; ATEX 
ROHS
Conform 

General ordering data

Version
VG Ex MS (Ex brass cable gland), Cable glands, straight, M 16, 16 mm, OD min. 3 - OD max. 12 mm, IP66, IP68, Brass, nickel-plated 
Order No.
1460040000 
Type
VG M16 EXE MS 
GTIN (EAN)
4050118265989 
Qty.
50 items

Dimensions and weights

Height
46 mm
Height (inches)
1,811 inch
Length
46 mm
Length (inches)
1,811 inch
Net weight
50,6 g

Temperatures

Operating temperature
-40 °C...100 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
6c 
REACH SVHC
Lead 7439-92-1 
SCIP
b5ff1f66-ddba-4739-9fc0-0521ddb52139 

Certificate numbers cable gland

Certificate no. cable gland (ATEX)
IMQ 11 ATEX 038 X 
Certificate no. cable gland (GOST)
POCC TR.05.B04161 
Märkning
Ex d IIC Gb 
Ex e IIC Gb 
Ex tb IIIC Db IP66/68 

General information

AF size 1
22 mm
AF size 2
22 mm
Basic material
Brass, nickel-plated 
Cable gland
metric 
Clamp insert
Neoprene 
Halogen
Yes 
Length of thread
16 mm
Nota: grado di protezione
Please observe the information in the installation instructions. 
O-Ring
NBR 
Operating temperature range, max.
100 °C
Operating temperature range, min.
-40 °C
Outer cable diameter, max.
12 mm
Outer cable diameter, min.
3 mm
Pitch of thread
1,5 mm
Protection degree
IP66 
IP68 - 6 bar (30 min.) 
Protection degree with GWDR
IP66 
IP68 
Seal insert
CR 
Standards
EN 60079-0 
EN 60079-1 
EN 60079-7 
EN 60079-11 
EN 60079-31 
Tuerca (externa)
M 16 
설치 지침
See assembly instructions 

Important note

Product information
For enclosure wall thicknesses less than or equal to 3 mm (e.g. Klippon STB enclosures), an additional flat gasket must be used - GWDR NP.
Additional flat gaskets are included in the packaging unit. 

Classifications

ETIM 8.0
EC000441 
ETIM 9.0
EC000441 
ETIM 10.0
EC000441 
ECLASS 14.0
27-14-08-04 
ECLASS 15.0
27-14-08-04