ITS 24-240VUC 1CO M7C
Product image
Similar to illustration
ITS 24-240VUC 1CO M7C
Wiring diagram
ITS 24-240VUC 1CO M7C
Dimensional drawing
ITS 24-240VUC 1CO M7C
Miscellaneous
Detailed drawing
ITS 24-240VUC 1CO M7C
Graph
Time functions
ITS 24-240VUC 1CO M7C
Graph
Time functions
ITS 24-240VUC 1CO M7C
Type codes
Miscellaneous

ITS 24-240VUC 1CO M7C

IT TIMER, Multifunction timing relay, with separate control input, Number of contacts: 1, CO contact, AgNi, Rated control voltage: 24...48 V DC, 24...230 V AC, Continuous current: 5 A, Screw connection

Référence produit 2496190000
Ouvrir dans le configurateur
Fiche technique Engineering Support Product Downloads
Aksesuarlar 9 İlgili ürünler 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Control side Load side General data Insulation coordination Connection data Classifications

Approvals

Сертификаты
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Változat
IT TIMER, Multifunction timing relay, with separate control input, Number of contacts: 1, CO contact, AgNi, Rated control voltage: 24...48 V DC, 24...230 V AC, Continuous current: 5 A, Screw connection 
Nr zam.
2496190000 
Type
ITS 24-240VUC 1CO M7C 
GTIN (EAN)
4050118506211 
Qty.
1 adet

Dimensions and weights

깊이
57,9 mm
Depth (inches)
2,28 inch
Height
98 mm
Height (inches)
3,858 inch
너비
17,5 mm
Width (inches)
0,689 inch
Net weight
44 g

Temperatures

Temperatura magazynowania
-40 °C...70 °C 
Omgivningstemperatur
-25 °C…50 °C 
Humidity
25 - 75%, no condensation 

Environmental Product Compliance

RoHS-kompatibilitetsstatus
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Control side

Rated control voltage
24...48 V DC 
24...230 V AC 
Power rating
8 VA @ 230 V AC 
0.4 W at 24 V DC 
Status indicator
LED green (U/t): flashes when time runs, lights permanently with supply voltage applied 
LED yellow (R): relay closed 
Time ranges
0.05 s - 1 s 
0.5 s - 10 s 
3 s - 60 s 
0.5 min - 10 min 
3 min - 1 h 
0.5 h - 10 h 
Setting tolerance
5 %
Max. reset time after voltage interruption
100 ms
Basic accuracy
±6% (of scale-end value, for time range 0.05 s - 1 s) 
±1.5% (of scale-end value, for all other time ranges) 
Min. pulse duration
50 ms
Repeat accuracy
<0.5 % or ±5 ms 

Load side

Rated switching voltage
250 V AC 
Continuous current
5 A 
Max. switching voltage, AC
250 V
Max. switching voltage, DC
30 V
Min. switching power
10 mA @ 12 V 
100 mA @ 5 V 
AC switching capacity (resistive), max.
1250 VA 
DC switching capacity (resistive), max.
90 W 
Contact type
1 CO contact (AgNi) 
Mechanical service life
1 x 106 switching cycles 

General data

Byggform
Installation housing; 1TE 
Suitable for front mounting
No 
Utförande
with separate control input 
Mounting rail
TS 35 
Test button available
No 
Mechanical switch position indicator
No 
Resistance to vibration EN 61812-1
10 Hz...60 Hz: 0.15 mm 
60 Hz...150 Hz: 2 g 

Insulation coordination

Märkspänning
300 V
Nedsmutsningsgrad
2 
Surge voltage category
II 
Clearance and creepage distances for control side - load side
≥ 3 mm 
Dielectric strength for control side - load side
1.6 kV 
Impulse withstand voltage
2.5 kV 
Protection degree
IP20 

Connection data

Vezetékcsatlakozás-technika
Screw connection 
Longueur de dénudage, raccordement nominal
7 mm
Tightening torque, max.
0,5 Nm
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,25 mm²
2,5 mm²
Wire connection cross section AWG, min.
AWG 23 
Wire connection cross section AWG, max.
AWG 14 
Wire cross-section, solid, min.
0,25 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,25 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,25 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2,5 mm²
Blade size
size PH1 

Classifications

ETIM 8.0
EC001439 
ETIM 9.0
EC001439 
ETIM 10.0
EC001439 
ECLASS 14.0
27-37-16-05 
ECLASS 15.0
27-37-16-05