VPU II 2 PV 600V DC
VPU II 2 PV 600V DC
Electric symbol
Circuit diagram

VPU II 2 PV 600V DC

Bu ürün yakında mevcut olmayacak.

Alternatif ürün: 2857060000

Surge voltage arrester, Low voltage, without telecomm. contact

Ürün No. 1351340000
Konfigüratörde aç
Veri sayfasını indir Mühendislik desteği Ürün İndirmleri
Aksesuarlar 1 Yedek parçalar 1 İlgili ürünler 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Insulation coordination acc. to EN 50178 Photovoltaic technical data Rated data IEC / EN Connection data Electrical data General data Classifications Tender specification sheets

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, without telecomm. contact 
Order No.
1351340000 
Type
VPU II 2 PV 600V DC 
GTIN (EAN)
4050118158731 
Qty.
1 adet
Delivery status
This article will no longer be available in the future. 
Last order date
/Date(1774908000000)/ 
Alternative product
[2857060000](~/p/2857060000) 

Dimensions and weights

Depth
69 mm
Depth (inches)
2,717 inch
Height
94 mm
Height (inches)
3,701 inch
Width
35,6 mm
Width (inches)
1,402 inch
Mounting dimension - height
75 mm
순중량
290 g

Temperatures

Storage temperature
-40 °C...80 °C 
Operating temperature
-40 °C...70 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

General data

IP20 
Colour
black 
orange 
Design
Installation housing; 2TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 2000 m 
Optical function display
green = OK; red = arrester is defective - replace 
UL 94 flammability rating
V-0 
Version
without telecomm. contact 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Photovoltaic technical data

Discharge current In (8/20 µs)
12.5 kA 
Operating height in the grounded PV system
≤ 2000 m 
Operating height in ungrounded PV system
≤ 2000 m 
Protection level Up (+/PE)
≤ 2.2 kV 
Protection level Up (-/PE)
≤ 2.2 kV 
PV system voltage, max. Ucpv
600 V
Requirements class
Type II 
Schutzpegel Up (+/-)
≤ 4.4 kV 
Short-circuit curent ISCPV
200 A
Standards
EN 50539-11 
Tensione d’esercizio max. continua DC modalità UCPV +/- , -/PE , +/PE
600 V
Total discharge current Itotal ( 8/20µs)
40 kA

Rated data IEC / EN

Discharge current In (8/20µs) wire-PE
20 kA 
Integrated back-up fuse
No 
Max. continuous voltage, Uc (DC)
600 V 
napięcie znamionowe (DC)
600 V 
Number of poles
2 
PV voltage, acc. to IEC 60364-7-712
<600 V 
Response time / fallback time
≤ 25 ns 
Signalling contact
No 
SPD type
T2 
Standards
EN 50539-11 
U에서 누설 전류n
30 µA
Voltage type
DC 

Connection data

Stripping length
15 mm
Type of connection
Screw connection 
Stripping length, rated connection
15 mm
Tightening torque, min.
2 Nm
Tightening torque, max.
3 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
1,5 mm²
Clamping range, max.
35 mm²
Wire cross-section, solid, min.
1,5 mm²
Wire cross-section, solid, max.
16 mm²
Section de raccordement du conducteur, souple, min.
1,5 mm²
Section de raccordement du conducteur, souple, max.
25 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
1,5 mm²
Ledardiameter, fintrådig med ändhylsaH (DIN 46228/1), max.
50 mm²
Connection cross-section, stranded, min.
1,5 mm²
Connection cross-section, stranded, max.
50 mm²

Electrical data

Voltage type
DC 

General data

Number of poles
2 
IP20 
Colour
black 
orange 

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-90-90 
ECLASS 15.0
27-17-90-90 

Tender specification sheets

Long specification
Multi-pole surge voltage arrestor according to the requirements of Class II acc. to IEC 50539-11. Consisting of V0 material, the arrestor serves as overvoltage protection and is used in applications according to IEC 50539-12. The use of a high-performance varistor meets the inspection requirements for Class II surge protection systems on the basis of the standards. The arrestor is installed in the vicinity of the equipment that needs protection, in a commercially available installation/electrical distribution enclosure. With thermal separation device on the varistor. If protection is no longer available, the colour in the display window changes from green to red. Rated voltage: 600 VAC In/max (8/20 µs): 20/40 kA, protection level < 2.2 kV l, type: Weidmüller VPU II 2 PV 600 V/40 kA, Order No. 1351340000 or equivalent 
Short specification
Class II arrester with In/Imax: 20/40 kA suitable for 600 V PV systems. Protection level < 2.2 kV. Type: Weidmüller VPU II 2 PV 600 V/40 kA Order no. 13513400000 or equivalent