PV 210S0F3CXXV1O0TA1PA10PWW
PV 210S0F3CXXV1O0TA1PA10PWW
PV 210S0F3CXXV1O0TA1PA10PWW
PV 210S0F3CXXV1O0TA1PA10PWW
PV 210S0F3CXXV1O0TA1PA10PWW

PV 210S0F3CXXV1O0TA1PA10PWW

Photovoltaics, Combiner Box, 1000 V, 1 MPP, 10 Inputs / 1 Output per MPP, With fuse holder, Surge protection I / II, Switch disconnector, Current monitoring, Cable gland, Designed for Fronius Tauro Eco Inverters

Ürün No. 8000111136
Veri sayfasını indir Ürün İndirmleri
İlgili ürünler 22
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Included in delivery Electrical characteristics Enclosure General data Inputs Outputs Surge protection DC side DC load break switch Important note Classifications Tender specification sheets

Approvals

ROHS
Conform 

General ordering data

Version
Photovoltaics, Combiner Box, 1000 V, 1 MPP, 10 Inputs / 1 Output per MPP, With fuse holder, Surge protection I / II, Switch disconnector, Current monitoring, Cable gland, Designed for Fronius Tauro Eco Inverters 
Order No.
8000111136 
유형
PV 210S0F3CXXV1O0TA1PA10PWW 
GTIN(EAN)
4099986933927 
Qty.
1 adet

Dimensions and weights

Depth
300 mm
깊이 (인치)
11,811 inch
Depth with add-on components
300 mm
Height
847 mm
Height (inches)
33,346 inch
Width
636 mm
Width (inches)
25,039 inch
Net weight
29.000 g

Temperatures

Ambient temperature
-20 °C…45 °C 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
6c, 7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
1d28ada4-1634-4382-8635-45f6353a6574 

Included in delivery

Included accessories
  • Article:
    Mounting foot
  • Quantity:
    4

Electrical characteristics

Corrente per punto di massima potenza, max.
135 A
Névleges DC feszültség
1.000 V
Névleges rövid idejű áramállóság
  • Rated current:
    162,5 A
연결당 정격 DC 전류
  • Current per string, max.:
    30 A

Enclosure

Connection type string
Internal terminal (with cable gland feed-through) 
Enclosure attachment
Fixing lugs 
Impact resistance
IK10 in accordance with IEC 62262 
Insulating material
Polyester glass-fibre reinforced, Polycarbonate 
Protection class
II 
Type of mounting
Fixing lugs 

General data

Installation location
Protected outdoor area (>1 km from sea) 
Protection degree
IP65 
Standards
EN 61643-31 

Inputs

Amount of maximum power points (MPP)
1 
Cartridge fuse
10 x 38 mm 
DC Input + & -
  • Wire connection:
    • Type of connection:
      Screw terminal connectors
    • Wire cross-section, min.:
      1 mm²
    • Wire cross-section, max.:
      16 mm²
  • Cable entry:
    • Number of cable entries:
      10
Functional earth connector
  • Cable entry:
    • Nombre d’entrées de câbles:
      1
  • Vezetékcsatlakozó:
    • Type of connection:
      Screw terminal connectors
    • Flexible, max. H05(07) V-K:
      25 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      16 mm²
Fuse type
Empty fuse holder 
Fuse-link standard
gPV (EN 60269-6) 
Fused poles of string
+/- 
Fuses
Yes 
Max. number of DC inputs
per Maximum Power Point 10 inputs connected in parallel 
Number of conduit inlets
10 
Number of string inputs per MPP
≥ 7…≤ 10 
Surge protection auxiliary contact
  • Cable entry:
    • Number of cable entries:
      1
  • Wire connection:
    • Type of connection:
      PUSH IN with actuator
    • Flexible, max. H05(07) V-K:
      2,5 mm²
    • w. wire end ferrule, DIN 46228 pt 1, max.:
      2,5 mm²
Number of inputs
10 

Outputs

DC Output + & -
  • Wire connection:
    • Type of connection:
      Screw connection
Max. number of DC outputs
per Maximum Power Point 1 output 

Surge protection DC side

Discharge current In (8/20 µs)
20 kA 
Discharge current, max. (8/20 µs)
40 kA
Lightning test current Iimp (10/350 µs)
6.25 kA 
Protector de sobretensión lado DC
1000 V type I + II 
Requirements class
Type I/II 
Short-circuit curent ISCPV
162,5 A
Standards
EN 61643-31 
Tension de fonctionnement continue max. mode DC UCPV +/- , -/PE , +/PE
1.000 V
Tensión de la instalación FV, máx. Ucpv
1.000 V
Total discharge current Itotal ( 8/20µs)
50 kA
Total discharge current Itotal (10/350µs)
12,5 kA

DC load break switch

Motor drive available
No 
Number of breaking operation cycles at rated current
200 
Number of operating cycles
10000 
Rated impulse withstand voltage
12 kV 
Switch disconnector execution
switch inside enclosure 
Voltage type
DC 

Important note

Product information
The SCIP number was assigned due to a lead content of more than 0.1 % of the net weight.

Safe use instruction according to ECHA:
The identification of the hazardous substance is sufficient to allow safe use of the article throughout its life cycle, including the service life, disassembly and waste/recycling phase Fuses are not included 

Classifications

ETIM 8.0
EC003857 
ETIM 9.0
EC003857 
ETIM 10.0
EC003857 
ECLASS 14.0
22-57-02-92 
ECLASS 15.0
22-57-02-92 

Tender specification sheets

Long specification

Combiner box for inverters with 1 MPP tracker, suitable for protecting the DC side of a photovoltaic system according to DIN CLC/TS 51643-32.

MPP1:
10 inputs, connection via M25 cable gland with multiple sealing inserts. PUSH IN connection / single-wire, multi-wire, with/without ferrule.
1 output, connection via M25 cable gland with multiple sealing inserts. PUSH IN connection / single-wire, multi-wire, with/without ferrule.

Max. string voltage Uoc: 1000 VDC
1 class/type I + II combined arrester with signal contact
Fuse holders for inputs and outputs (fuses 10x38 to be ordered separately)
With lockable DC load break switch for safe separation of the string lines according to DIN EN IEC 60947-3
Connection of the signal contact via M16 cable glands (Clamping range 5-10 mmØ) max. conductor cross-section: 1.5 mm²
Connection of the functional earth via M16 cable glands (Clamping range 5-10 mmØ) Conductor cross-section: ≥ 16 mm²
Protection class: IP65
All built into a glas fibre reinforced polyester housing. Dimensions HxWxD: 847x636x300 mm

Approval according to low voltage switchgear and controlgear IEC 61439-1 and EN 61439-2