VPU AC II 1 R 480/50
VPU AC II 1 R 480/50
Electric symbol
Schematic circuit diagram

VPU AC II 1 R 480/50

Surge voltage arrester, Low voltage, Surge protection, with remote contact, Single-phase, TN

Produkt ID 2591220000
Åbn i konfiguratoren
Download datablad Engineering Support Product Downloads
Tilbehør 4 Reservedele 3 Anvendte produkter 4
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance Rated data UL Connection data, remote alert General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Connection data Electrical data General data Guarantee Important note Product images Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319230/-S800/-T1z1mm-S80) 
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319263/-S800/-T1z1mm-S80) 
ROHS
Conform 
UL File Number Search
[UL Website](https://database.ul.com/cgi-bin/XYV/cgifind/LISEXT/1FRAME/gfilenbr.html) 
Certificate No. (cURus)
E3542610000 

General ordering data

Version
Surge voltage arrester, Low voltage, Surge protection, with remote contact, Single-phase, TN 
Order No.
2591220000 
Type
VPU AC II 1 R 480/50 
GTIN (EAN)
4050118599718 
Qty.
1 Styk

Dimensions and weights

Depth
68 mm
Depth (inches)
2,677 inch
Depth including DIN rail
76 mm
Height
111 mm
Height (inches)
4,37 inch
Width
18 mm
Width (inches)
0,709 inch
Net weight
17 g

Temperatures

Storage temperature
-40 °C...85 °C 
Ambient temperature
-40 °C…85 °C 
Operating temperature
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

Rated data UL

Ambient temperature (operational), max.
85 °C
Rated Voltage UN
400 V
MCOV (L-PE)
480 V
SCCR
200 kA
In
20 kA
Category
SPD TYPE 1CA 
Ambient temperature (operational), min.
-40 °C
Certificate No. (cURus)
E3542610000 
VPR (L-PE)
1.500 V
Voltage type
AC 
UL Energy Networks
Split-Phase 

Connection data, remote alert

Connection type
PUSH IN 
Cross-section for connected wire, solid core, max.
1,5 mm²
Cross-section for connected wire, solid core, min.
0,25 mm²
Stripping length
8 mm

General data

Colour
orange 
black 
Design
Installation housing; 1TE 
Insta IP 20 
Mounting rail
TS 35 
Operating altitude
≤ 4000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 in installed state 
Segment
Power distribution 
UL 94 flammability rating
V-0 
Version
Surge protection 
with remote contact 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Rated data IEC / EN

Clase de requisitos según IEC 61643-11
Type II 
Type III 
Combined pulse UOC
6 kV
Coordinamento energetico
Type II 
Type III 
Discharge current (type III)
3 kA
Discharge current In (8/20µs) wire-PE
20 kA 
Follow-on current extinguishing capability Ifi
Follow current need not be taken into account 
Frequency range, max.
60 Hz
Frequenzbereich, min.
50 Hz
Fuse protection
No Fuse neccessary ≤315 A gG 
250 A gG @50 kA Isccr 
315 A gG @25 kA Isccr 
Integrated back-up fuse
No 
Low voltage network
Single-phase 
TN 
Läckström vid Un
0,3 mA
Mains voltage
400 V / 690 V 
Max. continuous voltage, Uc (AC)
480 V 
Normas
IEC 61643-11 
EN 61643-11 
UL 1449 
Number of poles
1 
Protection level Up at IN (L/N-PE)
≤ 2.3 kV 
Rated voltage (AC)
400 V
Requirements class, acc. to EN 61643-11
T2 
T3 
Response time / fallback time
≤ 25 ns 
Short-circuit current rating ISCCR
50 kA
Signalling contact
250 V 1A 1CO 
Temporary surge voltage (over-voltage) - TOV
581 V
Voltage type
AC 
Överspänningsskydd typ
T2 
Ток утечки, Iмакс. (8/20 мкс), провод – защ. заземление (PE)
50 kA 

Connection data

Stripping length
18 mm
Wire connection method
Screw connection 
Type of connection
Screw connection 
Stripping length, rated connection
18 mm
Tightening torque, min.
3 Nm
Tightening torque, max.
4,5 Nm
Clamping range, rated connection
16 mm²
Clamping range, min.
1,5 mm²
35 mm²
Wire connection cross section AWG, min.
AWG 16 
Wire connection cross section AWG, max.
AWG 2 
Wire cross-section, solid, min.
1,5 mm²
Wire cross-section, solid, max.
35 mm²
Wire connection cross section, finely stranded, min.
1,5 mm²
Wire connection cross section, finely stranded, max.
25 mm²
Connection cross-section, stranded, min.
1,5 mm²
Connection cross-section, stranded, max.
35 mm²

Electrical data

Voltage type
AC 

General data

Number of poles
1 
Protection degree
IP20 in installed state 
Colour
orange 
black 

Guarantee

Time interval
5 years 

Important note

Product information
For use in DC applications, please use the fuse of SIBA Type NH2XL aR/aSF DC 1500 V 
Notes
Only applicable to IT power systems where the earth on the distribution transformer is interconnected with the earth on the consumer side (RE=RA in Figure 44.A1 of IEC 60634-4-44:2018). 

Product images

Classifications

ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 14.0
27-17-12-02 
ECLASS 15.0
27-17-12-02