ACT20M-TCI-AO-E-P
Product image
ACT20M-TCI-AO-E-P
Connection diagram
ACT20M-TCI-AO-E-P
Dimensioned drawing
ACT20M-TCI-AO-E-P

ACT20M-TCI-AO-E-P

Product not yet available, preliminary product data.

Dit product is nog niet beschikbaar.

Temperature converter, Thermocouple, Without galvanic isolation, Input : Temperature, thermocouple, Output : I / U

Product ID 2825290000
Gegevensblad downloaden Engineeringondersteuning Productdownloads
Toebehoren 4 Verwante producten 6
General ordering data Dimensions and weights Temperatures Environmental Product Compliance Input Output General data Insulation coordination Data for Ex applications (ATEX) Connection data EMC conformity and approvals Part description Classifications

General ordering data

Version
Temperature converter, Thermocouple, Without galvanic isolation, Input : Temperature, thermocouple, Output : I / U 
Order No.
2825290000 
Type
ACT20M-TCI-AO-E-P 
GTIN (EAN)
4064675361107 
Qty.
1 items

Dimensions and weights

Depth
114,3 mm
Depth (inches)
4,5 inch
Height
112,5 mm
Height (inches)
4,429 inch
Width
6,1 mm
Width (inches)
0,24 inch
Net weight
0 g

Temperatures

Storage temperature
-40 °C...85 °C 
Humidity
40 °C / 93 % rel. humidity, no condensation 

Environmental Product Compliance

RoHS Compliance Status
Compliant with exemption 
RoHS Exemption (if applicable/known)
7a, 7cI 
REACH SVHC
Lead 7439-92-1 
SCIP
2f6dd957-421a-46db-a0c2-cf1609156924 

Input

Number inputs
1 
Sensor
Thermocouples: J, K 
Temperature input range
Configurable 
J: (-100…+1200 °C) 
K: (-180…+1372 °C) 
min. measurement range 50°C (TC) 

Output

Load impedance current
≤ 600 Ω 
load impedance voltage
≥ 10 kΩ 
Number of outputs
1 
Output current
configurable 
0...20 mA 
4...20 mA 
Output voltage, note
configurable 
0(2)...10 V 
0(1)...5 V 
Type
active 
connected control must be passive 
Wire break detection
Configurable 
3.5 mA / 23 mA / none 

General data

Accuracy
absolute accuracy: <±0.1 % of the measurement range 
Basic accuracy: <±1 °C 
Configuration
DIP switch 
Mounting rail
TS 35 
Nominal power consumption
0,5 VA
Operating altitude
≤ 2000 m 
Power consumption, max.
0,52 W
Power consumption, typ.
0,37 W
Protection degree
IP20 
Step response time
Configurable 
≤ 30 ms 
<300 ms 
Supply voltage
24 V DC ± 30 % 
Temperature coefficient
0,1 °C ⁄ °C 
or 
≤0,01% des Messbereichs⁄°C 

Insulation coordination

EMC standards
IEC 61326-1 
NE 21 
Galvanic isolation
3-way isolator 
Pollution severity
2 
Surge voltage category
II 

Data for Ex applications (ATEX)

Installation location
Device installed in safe area, zone 2 
Marking
II 3 G Ex nA IIC T4 Gc 

Connection data

Type of connection
PUSH IN 
Clamping range, rated connection
2,5 mm²
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire connection cross section AWG, min.
AWG 30 
Wire connection cross section AWG, max.
AWG 14 

EMC conformity and approvals

EMC standards
IEC 61326-1 
NE 21 

Part description

Product description
The ACT20M-TCI-AO-S configurable temperature transducer isolates and converts analogue signals. An analogue thermocouple input signal (Type J, K) is linearly converted into an analogue output signal and is galvanically isolated. The power supply is galvanically isolated from the input and output (3-way isolation) and this is done with direct wiring or over the Weidmüller rail bus.
The ACT20M-TCI-AO-E-S configurable temperature transducer offers the same functionality but does not have galvanic isolation. 

Classifications

ETIM 8.0
EC002919 
ETIM 9.0
EC002919 
ETIM 10.0
EC002919 
ECLASS 14.0
27-21-01-29 
ECLASS 15.0
27-21-01-29