DRMKIT 24VAC 4CO LD/PB
Product image
Similar to illustration
DRMKIT 24VAC 4CO LD/PB
Wiring diagram
DRMKIT 24VAC 4CO LD/PB
Graph
DC load limit curve
Resistive load
DRMKIT 24VAC 4CO LD/PB
Graph
Electrical service life
DRMKIT 24VAC 4CO LD/PB
Graph
Derating curve
DRMKIT 24VAC 4CO LD/PB
Graph
AC operational voltage range
DRMKIT 24VAC 4CO LD/PB
Dimensional drawing
DRMKIT 24VAC 4CO LD/PB
Miscellaneous
Type codes

DRMKIT 24VAC 4CO LD/PB

D-SERIES DRM, Modulo a relè, Numero di contatti: 4, Contatto di scambio AgNi flash dorata, Tensione nominale: 24 V AC, Corrente permanente: 5 A, Collegamento a vite, Tasto di prova disponibile: Sì

Tuotteen tunnus 1542530000
Avaa konfiguraattorissa
Lataa tietosivu Engineering Support Product Downloads
Lisävarusteet 13 Yksittäiset osat 3 Samankaltaiset tuotteet 8
Approvals Dati generali per l’ordinazione Dimensiones y pesos Temperature Termékek környezetvédelmi megfelelősége Côté commande Load side General data Insulation coordination Further details of approvals / standards 결선 데이터 Classifications

Approvals

Approvals
![](https://assets.dam.weidmueller.com/assets/api/98e12ea5-58f4-450a-9983-f439987b3951/DAP_Master_ICON,w_80,q_80) 
![](https://assets.dam.weidmueller.com/assets/api/5855f480-81e6-48e1-aa53-1e87419df7ba/DAP_Master_ICON,w_80,q_80) 
ROHS
Conform 

Dati generali per l’ordinazione

Version
D-SERIES DRM, Modulo a relè, Numero di contatti: 4, Contatto di scambio AgNi flash dorata, Tensione nominale: 24 V AC, Corrente permanente: 5 A, Collegamento a vite, Tasto di prova disponibile: Sì 
Order No.
1542530000 
Type
DRMKIT 24VAC 4CO LD/PB 
GTIN (EAN)
4050118347265 
Qty.
10 items

Dimensiones y pesos

Depth
66,8 mm
깊이 (인치)
2,63 inch
Height
79,9 mm
Height (inches)
3,146 inch
Width
27,2 mm
Width (inches)
1,071 inch
Net weight
93,35 g

Temperature

Storage temperature
-40 °C...70 °C 
Ambient temperature
-40 °C…55 °C 

Termékek környezetvédelmi megfelelősége

RoHS Compliance Status
Conforme senza esenzione 
REACH SVHC
No SVHC above 0.1 wt% 

Côté commande

Rated control voltage
24 V AC 
Rated current AC
62.4 mA (50 Hz) 
52.2 mA (60 Hz) 
Power rating
1.0...1.2VA (60HZ) 
Coil resistance
160 Ω ± 10 % 
Status indicator
red LED 

Load side

Rated switching voltage
250 V AC 
Continuous current
5 A 
Max. switching frequency at rated load
0,1 Hz
Max. switching voltage, AC
250 V
Min. switching power
10 mA @ 12 V 
100 mA @ 5 V 
Inrush current
10 A / 50 ms 
AC switching capacity (resistive), max.
1250 VA 
DC switching capacity (resistive), max.
120 W @ 24 V 
Switch-on delay
<20 ms 
Switch-off delay
<20 ms 
Contact type
4 CO contact (AgNi flash gold-plated) 
Mechanical service life
20 x 106 switching cycles 

General data

Mounting rail
TS 35 
Test button available
Yes 
Version of test button
Lockable test button 
Momentary test button 
Mechanical switch position indicator
Yes 
Colour
black 
UL94 flammability rating component
  • Component:
    Housing
  • UL94 flammability rating:
    V-2
  • Component:
    Mounting foot
  • UL94 flammability rating:
    HB
  • Component:
    Retaining clip
  • UL94 flammability rating:
    HB
  • Component:
    Relay cover
  • UL94 flammability rating:
    V-2
  • Component:
    Relay baseplate
  • UL94 flammability rating:
    V-0
  • Component:
    Relay status indicator
  • UL94 flammability rating:
    HB
  • Component:
    Relay test button
  • UL94 flammability rating:
    HB

Insulation coordination

Rated voltage
250 V
Pollution severity
2 
Surge voltage category
III 
Insulating material group
C 
Clearance and creepage distances for control side - load side
≥ 5.5 mm 
Dielectric strength for control side - load side
1.8 kVeff /1 min. 
Dielectric strength of neighbouring contacts
1 kVeff / 1 min 
Dielectric strength of open contact
1 kVeff / 1 min 
Impulse withstand voltage
4.8 kV (1.2/50 µs) 
Protection degree
IP20 

Further details of approvals / standards

Certificate no. (cURus) relay
E312083 
Certificate no. (cURus) base
E312083 

결선 데이터

Wire connection method
스크류 결선 
Stripping length, rated connection
7 mm
Tightening torque, min.
0,5 Nm
Tightening torque, max.
0,7 Nm
Clamping range, min.
0,5 mm²
Clamping range, max.
2,5 mm²
Wire cross-section, solid, min.
0,5 mm²
Wire cross-section, solid, max.
2,5 mm²
Wire connection cross section, finely stranded, min.
0,5 mm²
Wire connection cross section, finely stranded, max.
2,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, min.
0,5 mm²
Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/4, max.
2,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), min.
0,5 mm²
Conductor cross-section, flexible, AEH (DIN 46228-1), max.
2,5 mm²
Wire connection cross section, finely stranded, two clampable wires, min.
0,5 mm²
Wire cross-section, finely stranded, two clampable wires, max.
1 mm²
Blade size
size PH1 

Classifications

ETIM 8.0
EC001437 
ETIM 9.0
EC001437 
ETIM 10.0
EC001437 
ECLASS 14.0
27-37-16-01 
ECLASS 15.0
27-37-16-01