Card holders

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617.
Plug-in card holders consist of the following components:
  • Circuit board with standard connectors and inserts with clamping-yoke connection.
  • Flange housing and holder/pull-out mechanism for the circuit card.
  • Plug-in card and mounting foot for attaching to mounting rail or directly to panel.
    The plug-in card holders are normally used in the following cases:
  • For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19" rack.
  • When there are only a few cards to install and connect.
  • The circuit board is located in a remote position where the cabling cannot be easily handled.
  • An older system needs to be updated with additional electronics modules.
  • For test devices, production processes and laboratories: where circuit boards needs to be swapped out quickly and connections must be easy to handle.
Card holders
SKH2 100x160mm
SKH2 100x160mm
SKH 100x160mm
SKH 100x160mm
SKHx2 233x160mm
SKHx2 233x160mm
  1. PLC Interfaces and Migration Solutions

  2. Kártyatartók

  3. 13 prodotti trovati