RJ45M R1D 3.3E4G/Y RL
RJ45M R1D 3.3E4G/Y RL
Dimensioned drawing
RJ45M R1D 3.3E4G/Y RL
Dimensioned drawing
RJ45M R1D 3.3E4G/Y RL
Dimensioned drawing
RJ45M R1D 3.3E4G/Y RL
Dimensioned drawing
RJ45M R1D 3.3E4G/Y RL
PCB design
RJ45M R1D 3.3E4G/Y RL
Wiring diagram
RJ45M R1D 3.3E4G/Y RL

RJ45M R1D 3.3E4G/Y RL

OMNIMATE Data - RJ45 transformer jack, PCB plug-in connector, THT/THR solder connection, 90°, bottom, 6 tabs, Yes, Plugging cycles: 750, Number of poles: 8, PA 9T, 30...80 µ" Ni / ≥ 30 µ" Au , Tape

Tuotteen tunnus 2564410000
Lataa tietosivu Product Downloads Engineering Support
Vastineet 20 Samankaltaiset tuotteet 13
Approvals General ordering data Dimensions and weights Environmental Product Compliance System specifications Electrical properties Standards Material data Packing Classifications

Approvals

ROHS
Conform  

General ordering data

Version
OMNIMATE Data - RJ45 transformer jack, PCB plug-in connector, THT/THR solder connection, 90°, bottom, 6 tabs, Yes, Plugging cycles: 750, Number of poles: 8, PA 9T, 30...80 µ" Ni / ≥ 30 µ" Au , Tape  
Order No.
2564410000  
Type
RJ45M R1D 3.3E4G/Y RL  
GTIN (EAN)
4050118572902  
Qty.
200  items
Packaging
Tape  

Dimensions and weights

Depth
21,35  mm
Depth (inches)
0,841  inch
Height
16,8  mm
Height (inches)
0,661  inch
Height of lowest version
13,5  mm
Width
15,9  mm
Width (inches)
0,626  inch
Net weight
0,001  g

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption  
REACH SVHC
No SVHC above 0.1 wt%  

System specifications

Colour of left LED
green  
Colour of right LED
yellow  
Forward current
20  mA
Forward voltage, max.
2,6  V
Forward voltage, min.
1,8  V
Latch option
bottom  
LED
Yes  
Mounting onto the PCB
THT/THR solder connection  
Number of poles
8  
Number of solder pins per pole
1  
Outgoing elbow
90°  
Performance-Category
10/100 MBit/s  
Pitch in inches (P)
0,05  "
Pitch in mm (P)
1,27  mm
Plugging cycles
750  
Product family
OMNIMATE Data - RJ45 transformer jack  
Protection degree
IP20  
Shield surface
nickel-plated  
Shield tabs
6 tabs  
Shielding
Yes  
Shielding material
Brass  
Side termination, characteristic
Solder flange  
Solder pin dimensions
Octagonal  
Solder pin length (l)
3,3  mm
Soldering process
Reflow soldering  
Manual soldering  
Wave soldering  
Tolerance of solder pin position
± 0.1 mm  
Transmission rate
10/100 MBit/s  
Type of connection
Solder connection  

Electrical properties

Dielectric strength, contact / contact
1000 V DC  
Dielectric strength, contact / shield
1500 V DC  
Insulation resistance
≥ 500 MΩ  
Nominal voltage
125  V
Rated current
1.5 A  

Standards

Connector standard
IEC 60603-7  

Material data

Insulating material
PA 9T  
Colour
black  
Colour chart (similar)
RAL 9011  
Insulating material group
II  
Comparative Tracking Index (CTI)
≥ 500  
Insulation resistance
≥ 500 MΩ  
Moisture Level (MSL)
1  
UL 94 flammability rating
V-0  
Contact base material
Phosphorus bronze  
Contact material
Cu-alloy  
Contact surface
Gold over nickel  
Layer structure of plug contact
30...80 µ" Ni / ≥ 30 µ" Au  
Storage temperature, min.
−40  °C
Storage temperature, max.
85  °C
Operating temperature, min.
−40  °C
Operating temperature, max.
85  °C

Packing

Packaging
Tape  
VPE length
345  mm
VPE width
345  mm
VPE height
125  mm
Tape reel diameter ∅ (A)
330 mm  
Surface resistance
Rs = 109 - 1012 Ω  

Classifications

ETIM 6.0
EC002637  
ETIM 7.0
EC002637  
ETIM 8.0
EC002637  
ETIM 9.0
EC002637  
ETIM 10.0
EC002637  
ECLASS 9.1
27-44-04-02  
ECLASS 10.0
27-44-04-02  
ECLASS 11.0
27-46-02-01  
ECLASS 12.0
27-46-02-01  
ECLASS 13.0
27-46-02-01  
ECLASS 14.0
27-46-02-01  
ECLASS 15.0
27-46-02-01