VPU AC II F 0 300/40
Product image
Abb.ähnlich
VPU AC II F 0 300/40
Electric symbol
Schematic circuit diagram

VPU AC II F 0 300/40

Surge voltage arrester, Low voltage, Class II surge protection, no leakage current

Tuotteen tunnus 2807520000
Lataa tietosivu Product Downloads
Lisävarusteet 3 Samankaltaiset tuotteet 2
Approvals General ordering data Dimensions and weights Temperatures Environmental Product Compliance General data Insulation coordination acc. to EN 50178 Rated data IEC / EN Electrical data General data Guarantee Important note Classifications

Approvals

Approvals
![](https://mdcop.weidmueller.com/mediadelivery/rendition/900_319222/-S800/-T1z1mm-S80) 
ROHS
Conform 

General ordering data

Version
Surge voltage arrester, Low voltage, Class II surge protection, no leakage current 
Order No.
2807520000 
Type
VPU AC II F 0 300/40 
GTIN (EAN)
4064675275541 
Qty.
1 items

Dimensions and weights

Depth
64 mm
Depth (inches)
2,52 inch
Height
45 mm
Height (inches)
1,772 inch
Width
18 mm
Width (inches)
0,709 inch
Net weight
69 g

Temperatures

Storage temperature
-40 °C...85 °C 
Operating temperature
-40 °C...85 °C 
Humidity
5 - 95% rel. humidity 

Environmental Product Compliance

RoHS Compliance Status
Compliant without exemption 
REACH SVHC
No SVHC above 0.1 wt% 

General data

Colour
orange 
Design
Installation housing; 1TE 
Insta IP 20 
Operating altitude
≤ 4000 m 
Optical function display
green = OK; red = arrester is defective - replace 
Protection degree
IP20 in installed state 
Segment
Power distribution 
UL 94 flammability rating
V-0 
Version
Class II surge protection, no leakage current 

Insulation coordination acc. to EN 50178

Pollution severity
2 
Surge voltage category
III 

Rated data IEC / EN

Combined pulse UOC
6 kV
Discharge current Imax (8/20µs) wire-PE
40 kA 
Discharge current In (8/20µs) wire-PE
20 kA 
Energy coordination (≤10 m)
Type II 
Type III 
Follow-on current extinguishing capability Ifi
Follow current need not be taken into account 
Frequency range, max.
60 Hz
Frequency range, min.
50 Hz
Fuse protection
Not required 
internally available 
Integrated back-up fuse
Yes 
Leakage current at Un
0,3 mA
Mains voltage
230 V / 400 V 
Max. continuous voltage, Uc (AC)
300 V 
Number of poles
1 
Protection level Up at IN (L/N-PE)
≤ 1.5 kV 
Rated voltage (AC)
230 V
Requirements category acc. to IEC 61643-11
Type II 
Type III 
Requirements class, acc. to EN 61643-11
T2 
T3 
Response time / fallback time
≤ 25 ns 
Short-circuit current rating ISCCR
100 kA
SPD type
T2 
T3 
Standards
IEC61643-11, EN61643-11 
Temporary surge voltage (over-voltage) - TOV
337 V
Voltage type
AC 

Electrical data

Voltage type
AC 

General data

Number of poles
1 
Protection degree
IP20 in installed state 
Colour
orange 

Guarantee

Time interval
5 years 

Important note

Product information
If F1 > 63A gG, then the integrated backup fuse always operates before F1 

Classifications

ETIM 7.0
EC000941 
ETIM 8.0
EC000941 
ETIM 9.0
EC000941 
ETIM 10.0
EC000941 
ECLASS 12.0
27-17-12-02 
ECLASS 13.0
27-17-12-02 
ECLASS 14.0
27-17-12-02 
ECLASS 15.0
27-17-12-02